Novel Nd-N/TiO2 Nanoparticles for Photocatalytic and Antioxidant Applications Using Hydrothermal Approach

Enhanced photocatalytic and electrochemical performance of hydrothermally prepared NiO-doped Co nanocomposites

In this study, we synthesize nanostructured nickel oxide (NiO) and doped cobalt (Co) by combining nickel(II) chloride hexahydrate (NiCl2.6H2O) and sodium hydroxide (NaOH) as initial substances. We analyzed the characteristics of the product nanostructures, including their structure, optical properties, and magnetic properties, using various techniques such as x-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet absorption spectroscopy (UV-Vis), Fourier transform infrared (FTIR) spectroscopy, and vibrating sample magnetometers (VSM). The NiO nanoparticles doped with Co showed photocatalytic activity in degrading methylene blue (MB) dye in aqueous solutions. We calculated the degradation efficiencies by analyzing the UV-Vis absorption spectra at the dye's absorption wavelength of 664 nm. It was observed that the NiO-doped Co nanoparticles facilitated enhanced recombination and migration of active elements, which led to more effective degradation of organic dyes during photocatalysis. We also assessed the electrochemical properties of the materials using cyclic voltammetry (CV) and impedance spectroscopy in a 1 mol% NaOH solution. The NiO-modified electrode exhibited poor voltammogram performance due to insufficient contact between nanoparticles and the electrolyte solution. In contrast, the uncapped NiO's oxidation and reduction cyclic voltammograms displayed redox peaks at 0.36 and 0.30 V, respectively.

Catalytic Decomposition of H2O2 in the Aqueous Dispersions of the Potassium Polytitanates Produced in Different Conditions of Molten Salt Synthesis

It is shown that the potassium polytitanate powder (PPT) synthesized at 500 °C via the treatment of powdered TiO₂ (rutile) in molten mixtures of KOH and KNO₃ is a cheap and effective catalyst of H₂O₂ chemical decomposition in aqueous solutions. At the same time, the PPT catalytic activity strongly depends on the [TiO₂]:[KOH]:[KNO₃] weight ratio in the mixture used for the synthesis, increasing with [KNO₃] in the order of PPT (30:30:40) < PPT (30:50:20) < PPT (30:70:0). The obtained results are explained by increased [Ti³⁺] in the PPT structure (XPS data), which is grown in this order from 0 to 4.0 and 21.9 at.%, respectively, due to the reduced oxidation activity of the melt used for PPT synthesis. The mechanism of the autocatalytic process taking place in the PPT-H₂O₂-H₂O system is analyzed. Taking into account the data of FT-IR spectroscopy, it is assumed that the increased catalytic activity of the investigated materials is related to the increased surface concentration of the Ti⁴⁺-O(H)-Ti⁴⁺ groups, formed from the Ti³⁺-O(H₃O⁺)-Ti⁴⁺ clusters and further transformed into Ti-O-O-H catalytic centers. Some possible applications of the PPT-H₂O₂-H₂O catalytic system, including the oxidation processes of green chemistry and photo-catalysis, are discussed.

Long-Term Stable Complementary Electrochromic Device Based on WO3 Working Electrode and NiO-Pt Counter Electrode

Complementary electrochromic devices (ECDs) composed of WO₃ and NiO electrodes have wide applications in smart windows. However, they have poor cycling stability due to ion-trapping and charge mismatch between electrodes, which limits their practical application. In this work, we introduce a partially covered counter electrode (CE) composed of NiO and Pt to achieve good stability and overcome the charge mismatch based on our structure of electrochromic electrode/Redox/catalytic counter electrode (ECM/Redox/CCE). The device is assembled using a NiO-Pt counter electrode with WO₃ as the working electrode, and PC/LiClO₄ containing a tetramethylthiourea/tetramethylformaminium disulfide (TMTU/TMFDS²⁺) redox couple as the electrolyte. The partially covered NiO-Pt CE-based ECD exhibits excellent EC performance, including a large optical modulation of 68.2% at 603 nm, rapid switching times of 5.3 s (coloring) and 12.8 s (bleaching), and a high coloration efficiency of 89.6 cm²·C^-1. In addition, the ECD achieves a good stability of 10,000 cycles, which is promising for practical application. These findings suggest that the structure of ECC/Redox/CCE could overcome the charge mismatch problem. Moreover, Pt could enhance the Redox couple's electrochemical activity for achieving high stability. This research provides a promising approach for the design of long-term stable complementary electrochromic devices.

Evaluation of the Antioxidant and Antimicrobial Potential of SiO2 Modified with Cinnamon Essential Oil (Cinnamomum Verum) for Its Use as a Nanofiller in Active Packaging PLA Films

One of the main causes of food spoilage is the lipid oxidation of its components, which generates the loss of nutrients and color, together with the invasion of pathogenic microorganisms. In order to minimize these effects, active packaging has played an important role in preservation in recent years. Therefore, in the present study, an active packaging film was developed using polylactic acid (PLA) and silicon dioxide (SiO₂) nanoparticles (NPs) (0.1% w/w) chemically modified with cinnamon essential oil (CEO). For the modification of the NPs, two methods (M1 and M2) were tested, and their effects on the chemical, mechanical, and physical properties of the polymer matrix were evaluated. The results showed that CEO conferred to SiO₂ NPs had a high percentage of 2,2-diphenyl-l-picrylhydrazyl (DPPH) free radical inhibition (>70%), cell viability (>80%), and strong inhibition to E. coli, at 45 and 11 µg/mL for M1 and M2, respectively, and thermal stability. Films were prepared with these NPs, and characterizations and evaluations on apple storage were performed for 21 days. The results show that the films with pristine SiO₂ improved tensile strength (28.06 MPa), as well as Young's modulus (0.368 MPa) since PLA films only presented values of 27.06 MPa and 0.324 MPa, respectively; however, films with modified NPs decreased tensile strength values (26.22 and 25.13 MPa), but increased elongation at break (from 5.05% to 10.32-8.32%). The water solubility decreased from 15% to 6-8% for the films with NPs, as well as the contact angle, from 90.21° to 73° for the M2 film. The water vapor permeability increased for the M2 film, presenting a value of 9.50 × 10^-8 g Pa^-1 h^-1 m^-2. FTIR analysis indicated that the addition of NPs with and without CEO did not modify the molecular structure of pure PLA; however, DSC analysis indicated that the crystallinity of the films was improved. The packaging prepared with M1 (without Tween 80) showed good results at the end of storage: lower values in color difference (5.59), organic acid degradation (0.042), weight loss (24.24%), and pH (4.02), making CEO-SiO₂ a good component to produce active packaging.