Effect of Silicon Source (Fly Ash, Silica Dust, Gangue) on the Preparation of Porous Mullite Ceramics from Aluminum Dross

Analysis of Influencing Factors in the Preparation of Mullite Whiskers from Recovering Silicon-Rich Waste under Low-Temperature Conditions

A large amount of catalyst waste containing silicon is deposited or buried every year, resulting in serious environmental pollution and a waste of resources. In this paper, a method to prepare mullite whiskers by recycling silica-rich waste under low-temperature conditions was investigated. The effects of raw materials, sintering temperature, catalyst addition, holding time and co-solvent addition on the structure, morphology and phase transition of the synthesized whiskers were investigated and characterized with SEM, XRD, TEM, TG and DTA. The results show that the addition of 10% Na₂SO₄ as the liquid-phase mass transfer medium could effectively improve the crystallization efficiency of mullite whiskers, while providing an ideal living environment for the growth of whiskers. The crystallinity and uniformity of mullite were positively correlated with the addition of aluminum fluoride trihydrate and the holding time, respectively. The growth law and conditions of mullite whiskers are discussed, and the optimal growth process conditions of mullite whiskers were optimized. The optimal conditions for mullite whiskers were determined as follows: the addition of aluminum fluoride is 5 wt%, the sintering temperature is 825 °C, and the holding time is 5 h at the time of sintering. This work offers new prospects for the industrial production of mullite whiskers from recycled silica-rich waste.

Microstructure and Crystallization Kinetics of Silica-Based Ceramic Cores with Enhanced High-Temperature Property

Silica-based ceramic cores play key roles in the casting of aeroengine blades, but they are highly limited by the poor high-temperature mechanical property. Here, fused mullite (FM) and sintered mullite (SM) powders were modified in silica-based ceramic cores, and the microstructure evolution and crystallization kinetics of ceramic cores depending on mullite types were studied. The ceramic cores with FM showed a dense microstructure and superior mechanical properties compared to those with SM. The ceramic cores with 10 wt.% of FM showed a crystallization activation energy of 1119.5 kJ/mol and a crystallization exponent of 1.74, and the values of 938.4 kJ/mol and 1.86 as SM were employed; the decreased crystallization activation energy and the elevated crystallization exponent by SM suggested that the excess impurities of alkali oxides and alkaline-earth oxides significantly promoted the crystallization of cristobalite. Even though the ceramic cores with mullite powders decreased slightly in the room-temperature mechanical property, their high-temperature flexure strength and creep deformation resistance were enhanced. The ceramic cores with 10 wt.% of FM showed excellent comprehensive performance, with linear shrinkage of 0.69%, room-temperature strength of 18.9 MPa, and high-temperature strength of 15.5 MPa, which satisfied the demands for hollow-blade casting.