Adsorption and Surface Analysis of Sodium Phosphate Corrosion Inhibitor on Carbon Steel in Simulated Concrete Pore Solution

Corrosion Prevention of Copper in 2.0 M Sulfamic Acid Using Novel Plant Extract: Chemical, Electrochemical, and Theoretical Studies

Copper corrosion was suppressed when a lupine extract was immersed in a 2 M sulfamic acid (H2NSO3H) solution. Numerous methods, including mass loss (ML), dynamic potential polarization (PL), and electrochemical impedance (EIS), were employed in these experiments, in addition to theoretical computations such as density functional theory (DFT), Fukui function, and Monte Carlo simulations. Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to analyze the Cu surface's composition and determine its form. Mass loss (ML) was used to examine the inhibition rate of copper corrosion in sulfamic acid at 25 °C in the presence of lupine extract. After examining how it behaved throughout the adsorption process on copper, it was discovered that it follows the Langmuir isotherm and chemical adsorption. An analysis of the PL curves indicates that the lupine extract is a mixed-type inhibitor. It was shown that the inhibitory efficiency increased to 84.2% with increasing lupine concentration. Additionally, as the data show, the efficiency of inhibitors is diminished by increasing temperatures. Theoretical calculations and experimental data were compared using Monte Carlo simulation (MC) and density functional theory (DFT).

Sodium Succinate as a Corrosion Inhibitor for Carbon Steel Rebars in Simulated Concrete Pore Solution

The inhibiting performance of sodium succinate (Na₂C₄H₄O₄) was evaluated as an organic environmentally friendly corrosion inhibitor for carbon steel rebars in 0.6 M Cl^- simulated concrete pore solution. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) measurements were utilized to evaluate the inhibitor performance at different temperatures and concentrations. The investigated corrosion inhibitor showed strong corrosion inhibition performance as it adsorbs on the surface of the rebar, creating a protective adsorption film. According to PDP, the inhibitor is classified as a mixed-type inhibitor with an inhibitor efficiency of 77, 69, 59, and 54% for 25, 35, 45, and 55 °C, respectively. EIS validated the PDP tests, showing that sodium succinate displaces the water molecules at the interface, creating an adsorption film by complexing with ferrous ions. The film thickness was calculated, and sodium succinate was able to produce a thicker protective film (span of nanometers) relative to the reference at every temperature. The adsorption of sodium succinate follows the Temkin adsorption isotherm. ΔG⁰_ads was found to be -32.75 kJ/mol, indicating that the inhibitor adsorption is a combined physisorption and chemisorption process. Different surface characterizations were utilized to substantiate the adsorption of sodium succinate, these include scanning electron microscopy, energy-dispersive X-ray spectroscopy, and micro-Raman spectroscopy. Finally, quantum chemical calculations showed that the delocalized electrons in the carboxyl group have high HOMO energies and electrostatic potential, which facilitates the adsorption of sodium succinate corrosion inhibitor onto the carbon steel rebar surface.