Theoretical and Experimental Investigation on the Flexural Behaviour of Prestressed NC-UHPC Composite Beams

Experimental Research on Fatigue Behavior of Reinforced UHPC-NC Composite Beams under Cyclic Loading

Ultra-high-performance concrete (UHPC), a new cement-based material that offers high mechanical strength and good durability, has been widely applied in construction and rehabilitation projects in recent years. An optimum bending system is achieved by positioning the UHPC layer at the bottom tensile zone of the composite beam and placing the normal-strength concrete (NC) layer at the upper compression zone, which is described as the UHPC-NC composite beam. The fatigue behavior of reinforced UHPC-NC composite beams was described in this study, with an emphasis on the effects of UHPC layer thickness and fatigue load level on the fatigue life of the beam, deformation of the interface between UHPC and NC layers, as well as the bending stiffness of the beam. A total of 9 reinforced UHPC-NC composite beams were tested under cyclic loading. The test variables include UHPC layer thicknesses (zero, 200, and 360 mm), reinforcement ratios (1.184% and 1.786%), and the upper load levels (0.39~0.65). The results showed that good bonding had been achieved without delamination between UHPC and NC layers prior to the final fatigue failure of the beam, and the bending stiffness of the composite beam experienced a three-stage reduction under cyclic loading. Furthermore, an equation was proposed to predict the stiffness reduction coefficient of UHPC-NC composite beams under cyclic loading.

Finite Element Analysis of Bonding Property and Flexural Strength of WUHPC-NC Gradient Concrete

Ultra-high-performance concrete (UHPC) has greater mechanical and durability performance than normal concrete (NC). Using a limited dosage of UHPC on the external surface of NC to form a gradient structure could significantly improve the strength and corrosion resistance of the concrete structure and avoid the problems caused by bulk UHPC. In this work, white ultra-high-performance concrete (WUHPC) was selected as an external protection layer for normal concrete to construct the gradient structure. WUHPC of different strengths were prepared, and 27 gradient WUHPC-NC specimens with different WUHPC strengths and interval times of 0, 10, and 20 h were tested using splitting tensile strength to reveal the bonding properties. Fifteen prism gradient specimens with the size of 100 × 100 × 400 mm and a WUHPC ratio of 1:1, 1:3, and 1:4 were tested using the four-pointed bending method to study the bending performance of the gradient concrete with different WUHPC thicknesses. Finite element models with different WUHPC thicknesses were also built to simulate the cracking behaviors. The results showed that the bonding properties of WUHPC-NC were stronger with less interval time and reached the maximum of 1.5 MPa when the interval was 0 h. Moreover, the bond strength first increased and then decreased with the decline in the strength gap between WUHPC and NC. When the thickness ratios of WUHPC to NC were 1:4, 1:3, and 1:1, the flexural strength of the gradient concrete improved by 89.82%, 78.80%, and 83.31%, respectively. The major cracks rapidly propagated from the 2 cm position to the bottom of the mid-span, and the thickness of 1:4 was the most efficient design. The results simulated by finite element analysis also proved that the elastic strain at the crack propagating point was the minimum and was easier to crack. The simulated results were in good accordance with the experimental phenomenon.