Effect of Aluminium Substitution on Physical Adsorption of Chloride and Sulphate Ions in Cement-Based Materials

Experiments on Chloride Binding and Its Release by Sulfates in Cementitious Materials

The aim of this study was to experimentally investigate the process of chloride binding and its sulfate-induced release in cementitious materials. The cementitious materials were replaced with hardened cement paste particles (HCPs) with water-to-cement ratios (w/c) of 0.35 and 0.45. A long-term immersion experiment of HCPs in 0.1 M sodium chloride solution was performed to investigate its chloride-binding capacity, and then it was immersed in sodium sulfate solutions with concentrations of 0.1 and 0.5 M to explore the release of chloride binding induced by sulfates. Silver nitrate titration and quantitative X-ray diffraction (QXRD) were used to measure the concentration of free chlorides in the solutions and the content of bound chlorides in HCPs, respectively. The results show that there is a higher chloride-binding capacity in HCPs with a w/c ratio of 0.45 compared to 0.35, and the content of chemically bound chlorides is associated with the formation and decomposition of Friedel's and Kuzel's salts in HCPs. The presence of sulfates can easily result in the release of bound chlorides in Friedel's salt, but it cannot cause a complete release of bound chlorides in Kuzel's salt. Physically bound chlorides are more easily released by sulfates than chemically bound chlorides, and a high w/c ratio or sulfate concentration can increase the release rate of bound chlorides in HCPs.

A Review on Cementitious and Geopolymer Composites with Lithium Slag Incorporation

This study critically reviews lithium slag (LS) as a supplementary cementitious material (SCM), thereby examining its physiochemical characteristics, mechanical properties, and durability within cementitious and geopolymer composites. The review reveals that LS's particle size distribution is comparable to fly ash (FA) and ground granulated blast furnace slag (GGBS), which suggests it can enhance densification and nucleation in concrete. The mechanical treatment of LS promotes early hydration by increasing the solubility of aluminum, lithium, and silicon. LS's compositional similarity to FA endows it with low-calcium, high-reactivity properties that are suitable for cementitious and geopolymeric applications. Increasing the LS content reduces setting times and flowability while initially enhancing mechanical properties, albeit with diminishing returns beyond a 30% threshold. LS significantly improves chloride ion resistance and impacts drying shrinkage variably. This study categorizes LS's role in concrete as a filler, pozzolan, and nucleation agent, thereby contributing to the material's overall reduced porosity and increased durability. Economically, LS's cost is substantially lower than FA's; meanwhile, its environmental footprint is comparable to GGBS, thereby making it a sustainable and cost-effective alternative. Notwithstanding, there is a necessity for further research on LS's fine-tuning through grinding, its tensile properties, its performance under environmental duress, and its pozzolanic reactivity to maximize its utility in concrete technologies. This study comprehensively discusses the current strengths and weaknesses of LS in the field of building materials, thereby offering fresh perspectives and methodologies to enhance its performance, improve its application efficiency, and broaden its scope. These efforts are driving the sustainable and green development of LS in waste utilization and advanced concrete technology.