Nanosized Hydroxyapatite Coating on PEEK Implants Enhances Early Bone Formation: A Histological and Three-Dimensional Investigation in Rabbit Bone

Hydroxyapatite-Coated Ti6Al4V ELI Alloy: In Vitro Cell Adhesion

The high rate of rejection and failure of orthopedic implants is primarily attributed to incomplete osseointegration and stress at the implant-to-bone interface due to significant differences in the mechanical properties of the implant and the surrounding bone. Various surface treatments have been developed to enhance the osteoconductive properties of implants. The aim of this work was the in vitro characterization of titanium alloy modified with a nanocrystalline hydroxyapatite surface layer in relative comparison to unmodified controls. This investigation focused on the behavior of the surface treatment in relation to the physiological environment. Moreover, the osteogenic response of human osteoblasts and adipose stem cells was assessed. Qualitative characterization of cellular interaction was performed via confocal laser scanning microscopy focusing on the cell nuclei and cytoskeletons. Filipodia were assessed using scanning electron microscopy. The results highlight that the HA treatment promotes protein adhesion as well as gene expression of osteoblasts and stem cells, which is relevant for the inorganic and organic components of the extracellular matrix and bone. In particular, cells grown onto HA-modified titanium alloy are able to promote ECM production, leading to a high expression of collagen I and non-collagenous proteins, which are crucial for regulating mineral matrix formation. Moreover, they present an impressive amount of filipodia having long extensions all over the test surface. These findings suggest that the HA surface treatment under investigation effectively enhances the osteoconductive properties of Ti6Al4V ELI.

Role of Polyetheretherketone in Prosthodontics: A Literature Review

Implant prostheses and other fixed and removable metal prostheses have led to an increase in demand for the development of new and efficient materials such as high-performance polymers polyetheretherketone (PEEK) over titanium and other metals because of their further complications in the human body. PEEK is a polymer that is nontoxic and has a modulus of elasticity that is comparable to that of human bone. PEEK implants provide benefits over metal implants, such as reducing the stress shielding effect, simple processing, and color resemblance to natural teeth. And it is a fantastic alternative to titanium for dental and orthopedic implants. The current review is undertaken to understand the properties of this PEEK material to weigh its benefits and drawbacks for potential use in dental implants and other prostheses.

Chemical-physical behavior of Hydroxyapatite: A modeling approach

Hydroxyapatite (HAp) is a ceramic composed of calcium phosphate, frequently employed as a bone substitute material due to its biocompatibility and bioactivity. Over the past century, there has been substantial attention in fields such as orthopedics and plastic surgery. Remarkably, synthetic HAp exhibits properties akin to those found in natural bone and teeth. Computational theoretical chemistry focuses on numerically computing molecular electronic structures and interactions. As chemistry education evolves, it's imperative to acknowledge the increasing significance of computational tools in research. Density Functional Theory (DFT) stands out as the most widely adopted method in contemporary computational chemistry. In this study, we synthesized Hydroxyapatite (HAp) via the double decomposition method using synthetic sources. The synthesized materials underwent thorough characterization, including X-ray Diffraction (XRD), UV-visible spectroscopy, and Fourier Transform Infrared (FTIR) spectroscopy under various conditions. Additionally, we performed quantum mechanical computations on the HAp molecule using density functional theory. Our results were then compared with experimental data. Our experimental findings highlight the successful synthesis of HAp, particularly under specific temperature conditions. Moreover, the quantum chemistry calculations exhibited excellent agreement with the experimental results, especially in terms of spectroscopic characterizations.

Evaluation of Implant Surface Modification with Nanohydroxyapatite Associated with the Use of L-PRF: In Vivo Study in Rats

Leukocyte-platelet-rich fibrin (L-PRF) contains growth factors that stimulate bone regeneration. This study evaluated the bone repair in a tibia rat model around two implant surfaces in combination or not with L-PRF by assessing microtomographic and histomorphometric parameters. A total of 48 female rats were used in the study, in which 24 received implants with two types of surface treatments (dual acid etched-DAE or nanohydroxyapatite-nanoHA), and the other 24 received the same mini implants with L-PRF, which was collected by cardiac puncture, centrifugated, and inserted in the bone bed. The animals were euthanized 7 and 30 days after implant placement, and the retrieved samples were prepared for microtomographic and histomorphometric (bone-to-implant contact-BIC; and Bone Area Fraction Occupancy-BAFO) analyses. The adhesion of the nanoHA surface onto the implant surface was investigated by insertion and removal in simulated bone medium (Sawbones). The adhesion evaluation revealed that the loss of nanoHA after this procedure (as measured with SEM) from the implant surface was less than 1%. Overall, the nanoHA surface presented more bone in contact and in proximity to the implant, a higher bone surface/tissue volume fraction, a higher number of bone trabeculae, as well as trabecular separation relative to the DAE surface. Such results were more evident when the nanoHA surface was combined with L-PRF and after 30 days in vivo. The nanoHA surface presented higher BAFO when compared to DAE, with or without association with L-PRF. Therefore, implants with a nanoHA surface potentially benefit from the association to L-PRF.

Novel 3D printable PEEK-HA-Mg2SiO4 composite material for spine implants: biocompatibility and imaging compatibility assessments

PURPOSE

To develop a novel 3D printable polyether ether ketone (PEEK)-hydroxyapatite (HA)-magnesium orthosilicate (Mg2SiO4) composite material with enhanced properties for potential use in tumour, osteoporosis and other spinal conditions. We aim to evaluate biocompatibility and imaging compatibility of the material.

METHODS

Materials were prepared in three different compositions, namely composite A: 75 weight % PEEK, 20 weight % HA, 5 weight % Mg2SiO4; composite B: 70 weight% PEEK, 25 weight % HA, 5 weight % Mg2SiO4; and composite C: 65 weight % PEEK, 30 weight % HA, 5 weight % Mg2SiO4. The materials were processed to obtain 3D printable filament. Biomechanical properties were analysed as per ASTM standards and biocompatibility of the novel material was evaluated using indirect and direct cell cytotoxicity tests. Cell viability of the novel material was compared to PEEK and PEEK-HA materials. The novel material was used to 3D print a standard spine cage. Furthermore, the CT and MR imaging compatibility of the novel material cage vs PEEK and PEEK-HA cages were evaluated using a phantom setup.

RESULTS

Composite A resulted in optimal material processing to obtain a 3D printable filament, while composite B and C resulted in non-optimal processing. Composite A enhanced cell viability up to ~ 20% compared to PEEK and PEEK-HA materials. Composite A cage generated minimal/no artefacts on CT and MR imaging and the images were comparable to that of PEEK and PEEK-HA cages.

CONCLUSION

Composite A demonstrated superior bioactivity vs PEEK and PEEK-HA materials and comparable imaging compatibility vs PEEK and PEEK-HA. Therefore, our material displays an excellent potential to manufacture spine implants with enhanced mechanical and bioactive property.

Novel nano-hydroxyapatite coating of additively manufactured three-dimensional porous implants improves bone ingrowth and initial fixation

Electron beam melting (EBM) has been used to fabricate three-dimensional (3D) porous Ti-6Al-4V surfaces for acetabular cups in total hip arthroplasty. However, there are radiographic concerns regarding poor implant fixation and bone ingrowth around electron beam melted (EBMed) 3D porous cups. We hypothesize that nano-hydroxyapatite (nHA) coating can promote bone ingrowth and thus decrease the occurrence of radiolucent lines around EBMed 3D porous cups. This study aimed to investigate the effect of a novel nHA coating on the biological performance of EBMed 3D porous implants in a beagle transcortical model. Low-porosity (control) and high-porosity 3D porous Ti-6Al-4V implants were manufactured using EBM. Half of the high-porosity implants were coated with nHA without clogging the 3D pores. Implants were inserted into the femoral diaphysis of the beagles. The beagles were euthanized at 4, 8, and 12 weeks postoperatively, and push-out testing was performed. Bone ingrowth was evaluated by histological analysis. Although the increase in porosity alone had no effect on biological behavior, the addition of nHA to high-porosity 3D implants significantly improved early bone fixation and bone ingrowth into the deep region of porous structures compared to low-porosity implants. This is the first report of a novel nHA coating that improved bone ingrowth into the deeper regions of 3D porous implants, which can prevent the occurrence of radiolucent lines around EBMed 3D porous cups.

The effects of HAp coating layer on mechanical and optical properties at bonding interface of high-performance polymers

PURPOSE

The effect of hydroxyapatite (HAp) coating layer on mechanical and optical properties at bonding interface of high-performance polymers (HPPs) used in computer-aided design (CAD)/computer-aided manufacture (CAM) technology was investigated in this in vitro study.

MATERIALS AND METHODS

Two hundred-twenty specimens were divided into two material groups (n = 110): polyetheretherketone (PEEK, KERA® starPEEK) and polyetherketoneketone (PEKK, Pekkton® ivory). For mechanical testing, each group was divided into five surface pretreatment subgroups and a control group (n = 10): HAp coating (1%,3%, 5%, and 10% concentrations) and sandblasting with 110-μm Al₂O₃ particles. For optical testing, each group was divided into five subgroups (n = 10): HAp coating (1%, 3%, 5%, and 10% concentrations) and control. The effects of the HAp coating on the optical changes and shear bond strength (SBS) of the specimens were investigated. Data was statistically analyzed by one-way ANOVA and Tukey's post-hoc test. Failure modes and surface properties of the specimens were examined by scanning electron microscopy (SEM) and coupled electron dispersive spectroscopy (EDS).

RESULTS

Average translucency and color change values increased with increasing HAp coating concentration in HPPs. As a result of the data, statistically significant differences were observed in terms of the effect of the HAp coating on SBS of HPPs (p < 0.05). Failure modes were examined, and mixed failure mode was observed.

CONCLUSION

HAp coating can contribute to the improvement of both the optical properties and bond strength of the HPPs to resin composite.

CLINICAL SIGNIFICANCE

Adhesion and color problems of high performance polymers are still under discussion. In order to solve these problems, generally focused on surface modifications of these polymers, but the effect of the HAp coating has not been investigated.

Biomimetic Strategy to Enhance Epithelial Cell Viability and Spreading on PEEK Implants

Polyetheretherketone (PEEK) is a biocompatible material widely used in spinal and craniofacial implants, with potential use in percutaneous implants. However, its inertness prevents it from forming a tight seal with the surrounding soft tissue, which can lead to infections and implant failure. Conversely, the surface chemistry of percutaneous organs (i.e., teeth) helps establish a strong interaction with the epithelial cells of the contacting soft tissues, and hence a tight seal, preventing infection. The seal is created by adsorption of basement membrane (BM) proteins, secreted by epithelial cells, onto the percutaneous organ surfaces. Here, we aim to create a tight seal between PEEK and epithelial tissues by mimicking the surface chemistry of teeth. Our hypothesis is that collagen I, the most abundant tooth protein, enables integration between the epithelial tissue and teeth by promoting adsorption of BM proteins. To test this, we immobilized collagen I via EDC/NHS coupling on a carboxylated PEEK surface modified using diazonium chemistry. We used titanium alloy (Ti-6Al-4V) for comparison, as titanium is the most widely used percutaneous biomaterial. Both collagen-modified PEEK and titanium showed a larger adsorption of key BM proteins (laminin, nidogen, and fibronectin) compared to controls. Keratinocyte epithelial cell viability on collagen-modified PEEK was twice that of control PEEK and ∼1.5 times that of control titanium after 3 days of cell seeding. Both keratinocytes and fibroblasts spread more on collagen-modified PEEK and titanium compared to controls. This work introduces a versatile and biomimetic surface modification technique that may enhance PEEK-epithelial tissue sealing with the potential of extending PEEK applications to percutaneous implants, making it competitive with titanium.

Effect of Smoke Exposure on Gene Expression in Bone Healing around Implants Coated with Nanohydroxyapatite

This study evaluated the effect of smoke exposure on the expression of genes related to bone metabolism in implants coated with nanohydroxyapatite (NHA). A total of 36 rats were exposed to cigarette smoke for 60 days. The animals were allocated into three groups: machined implants (MAC), dual acid-etched implants (DAE), and NHA-coated implants (NHA). Implants were installed in the left tibia of the rats after 30 days of smoke exposure. The implants were retrieved 7 and 30 days after implantation, and the adjacent bone analyzed using a real-time polymerase chain reaction for gene expression of alkaline phosphatase (ALP), osteopontin (OPN), receptor activator of the nuclear factor kappa ligand (RANKL), osteoprotegerin (OPG), the RANKL/OPG ratio, osteocalcin (OCN) and runt-related transcription factor 2 (Runx2). After 7 days, Runx2, OPN and OPG expression demonstrated significantly higher levels for the NHA surface treatment relative to DAE and MAC surfaces. NHA presented the lowest RANKL and RANKL/OPG levels. After 30 days, NHA-coated implants showed significantly higher levels of Runx2, ALP, OPN, OPG, OC, RANKL and RANKL/OPG relative to DAE and MAC implants. The results indicated a greater osteogenic and high osteoclastic activity around NHA implants, in comparison to DAE and MAC implants.

Biomechanical and histomorphometric evaluation of skin integration on titanium and PEEK implants with different surface treatments

Percutaneous implants are frequently affected by bacterial growth at the skin-implant interface. Integration between implant and surrounding skin is important to prevent bacteria from spreading to the underlying tissue. The standard method to evaluate skin-implant integration is by histomorphometry on samples which have been placed in tissue grown in vivo or ex vivo. In this study, a biomechanical method was developed and evaluated. The integration of implants into porcine skin was studied in an ex vivo model, where pig skin samples were cultivated in a nutrient solution. Cylindrical shaped implants, consisting of polyether ether ketone (PEEK) and titanium (Ti) with different surface treatments, were implanted in the skin tissue and the skin was grown in nutrient solution for 2 weeks. The implants were then extracted from the implantation site and the mechanical force during extraction was measured as a quantitative assessment of skin-implant integration. Implants from each group were also processed for histomorphometry and the degree of epidermal downgrowth (ED) and tissue to implant contact (TIC) was measured. A higher mean pullout force was observed for the PEEK implants compared to the Ti implants. Applying nanosized hydroxyapatite (HA) on Ti and PEEK increased the pullout force compared to uncoated controls, 24% for machined and 70% for blasted Ti, and 51% for machined PEEK. Treatment of Ti and PEEK with nanosized zirconium phosphate (ZrP) did not increase the pullout force. The histomorphometry analysis showed correlation between ED and pullout force, where the pullout force was inversely proportional to ED. For TIC, no significant differences were observed between the groups of same material (i.e. Ti, Ti+HA, Ti+ZrP, and PEEK, PEEK + HA, PEEK + ZrP), but it was significantly higher for PEEK compared to Ti. Scanning electron microscopy analysis was done on samples before and after the pullout tests, showing that the ZrP coating was unaffected by the 2 week ex vivo implantation and pullout procedure, no dissolution or detachment of the coating was observed. For the HA coating, a loss of coating was seen on approximately 5% of the total surface area of the implant. Graphical abstract.

Drug-Releasing Antibacterial Coating Made from Nano-Hydroxyapatite Using the Sonocoating Method

Medical implant use is associated with a risk of infection caused by bacteria on their surface. Implants with a surface that has both bone growth-promoting properties and antibacterial properties are of interest in orthopedics. In the current study, we fabricated a bioactive coating of hydroxyapatite nanoparticles on polyether ether ketone (PEEK) using the sonocoating method. The sonocoating method creates a layer by immersing the object in a suspension of nanoparticles in water and applying a high-power ultrasound. We show that the simple layer fabrication method results in a well-adhering layer with a thickness of 219 nm to 764 nm. Dropping cefuroxime sodium salt (Cef) antibiotic on the coated substrate creates a layer with a drug release effect and antibacterial activity against Staphylococcus aureus. We achieved a concentration of up to 1 mg of drug per cm² of the coated substrate. In drug release tests, an initial burst was observed within 24 h, accompanied by a linear stable release effect. The drug-loaded implants exhibited sufficient activity against S. aureus for 24 and 168 h. Thus, the simple method we present here produces a biocompatible coating that can be soaked with antibiotics for antibacterial properties and can be used for a range of medical implants.

Ambient temperature sulfonated carbon fiber reinforced PEEK with hydroxyapatite and reduced graphene oxide hydroxyapatite composite coating

30% carbon fiber reinforced polyetheretherketone (CFR-PEEK) has in recent times, become significant in the orthopedic industry because its elastic modulus can be engineered to match that of the human bone. But it is bioinert and does not integrate well with the immediate bone tissue environment. In this study, a combined surface modification technique involving ambient temperature sulfonation and surface coating of (hydroxyapatite (HA), 5%reduced graphene oxide hydroxyapatite(5%RGO/HA) and 10%reduced graphene oxide hydroxyapatite(10%RGO/HA) composites) on 30%CFR-PEEK was achieved with an appropriate temperature treatment at 345°C in nitrogen. The coatings adhered unto the surface of S30%CFR-PEEK with an improved hydrophilicity and bioactivity. With the sample S30%CFR-PEEK+HA, having the highest enhanced hydrophilicity from 112.5 ± 2.5° to 20 ± 2° and bioactivity. An improvement in hydrophilicity and bioactivity depicts a change in surface chemistry which will have a positive impact in the interaction of the materials surface with immediate bone environment for a successful application in the orthopedic industry.

Gradient nanostructured titanium stimulates cell responses in vitro and enhances osseointegration in vivo

Background

Though titanium (Ti) is widely used as dental materials in the clinic, effective methods to treat Ti for higher surface biological activity still lack. Through Surface mechanical attrition treatment (SMAT) technology we could endow Ti with gradient nanostructured surface (GNS Ti). To investigate the biocompatibility of GNS Ti for its further application in dental implant field, we study the effects of GNS Ti on cell responses in vitro and osseointegration of the implant with surrounding bone tissues in vivo.

Methods

In this study, GNS Ti was fabricated by SMAT. In vitro experiment, we co-cultured GNS Ti with bone mesenchymal stem cells (BMSCs), surface characterization was detected by transmission electron microscope (TEM). Adhesion, proliferation and differentiation of BMSCs were evaluated by scanning electron microscope (SEM), MTT, flow cytometry (FCM), alkaline phosphatase (ALP) and osteocalcin (OCN) tests. In vivo experiment, the GNS Ti was implanted into the rabbit mandible. Osteogenesis and osseointegration were evaluated by Micro CT, toluidine blue staining, and immunohistochemical staining at 4, 8, and 12 weeks postoperatively.

Results

Both results showed that compared with the coarse grained (CG) Ti, the GNS Ti stimulated the adhesion, proliferation, and differentiation of BMSCs and improved osteogenesis and osseointegration.

Conclusions

This study indicates that gradient nanostructured Ti is a promising material for dental implant application.

Can Polyether Ether Ketone Dethrone Titanium as the Choice Implant Material for Metastatic Spine Tumor Surgery?

Instrumentation during metastatic spine tumor surgery (MSTS) provides stability to the spinal column in patients with pathologic fracture or iatrogenic instability produced while undergoing extensive decompression. Titanium is the current implant material of choice in MSTS. However, it hinders radiotherapy planning and generates artifacts, with magnetic resonance imaging and computed tomography scans used for postoperative evaluation of tumor recurrence and/or complications. The high modulus of elasticity of titanium (110 GPa) results in stress shielding, which may lead to construct failure at the bone-implant interface. Polyether ether ketone (PEEK), a thermoplastic polymer, is an emerging alternative to titanium for use in MSTS. The modulus of elasticity of PEEK (3.6 GPa) is close to that of cortical bone (17-21 GPa), resulting in minimal stress shielding. Its radiolucent and nonmetallic properties cause minimal interference with magnetic resonance imaging and computed tomography scans. PEEK also causes low-dose perturbation for radiotherapy planning. However, PEEK has reduced bioactivity with bone and lacks sufficient rigidity to be used as rods in MSTS. The reduced bioactivity of PEEK may be addressed by 1) surface modification (introducing porosity or bioactive coating with hydroxyapatite [HA] or titanium) and 2) forming composites with HA/titanium. The mechanical properties of PEEK may be improved by forming composites with HA or carbon fiber. Despite these modifications, all PEEK and PEEK-based implants are difficult to handle and contour intraoperatively. Our review provides a comprehensive overview of PEEK and modified PEEK implants, with a description of their properties and limitations, potentially serving as a basis for their future development and use in MSTS.

Bioinspired Modifications of PEEK Implants for Bone Tissue Engineering

In recent years, polyetheretherketone (PEEK) has been increasingly employed as an implant material in clinical applications. Although PEEK is biocompatible, chemically stable, and radiolucent and has an elastic modulus similar to that of natural bone, it suffers from poor integration with surrounding bone tissue after implantation. To improve the bioactivity of PEEK, numerous strategies for functionalizing the PEEK surface and changing the PEEK structure have been proposed. Inspired by the components, structure, and function of bone tissue, this review discusses strategies to enhance the biocompatibility of PEEK implants and provides direction for fabricating multifunctional implants in the future.

Hydroxyapatite-incorporation improves bone formation on endosseous PEEK implant in canine tibia

BACKGROUND

Poly Ether Ether Ketone (PEEK) has been considered as a potential alternative material for endosseous dental implants, for its low elastic modulus, biocompatibility, and low cost in customized device manufacture. Hydroxyapatite-incorporation is supposed to improve the poor osseointegration of PEEK.

METHODS

In the present study we analyzed the in vivo response of hydroxyapatite-incorporated PEEK (PEEK-HA) implants in canine tibia. PEEK-HA and PEEK implants were implanted and were examined 4 weeks and 12 weeks after implantation with radiology and histology. Commercial titanium dental implants served as controls.

RESULTS

The ratio of bone volume to tissue volume of PEEK-HA implants was higher than that of PEEK implants 4 weeks after implantation in the μ-CT analysis. The bone implant contact of PEEK and PEEK-HA implants showed no statistical difference in the histological examination, but newly-formed bone around PEEK-HA implants showed more signs of mineralization than that around PEEK implants.

CONCLUSION

The study suggested that bone formation was improved with hydroxyapatite-incorporation in PEEK. Hydroxyapatite-incorporated PEEK implants may represent a potential material for endosseous dental implant.

Polyetheretherketone and Its Composites for Bone Replacement and Regeneration

In this article, recent advances in the development, preparation, biocompatibility and mechanical properties of polyetheretherketone (PEEK) and its composites for hard and soft tissue engineering are reviewed. PEEK has been widely employed for fabricating spinal fusions due to its radiolucency, chemical stability and superior sterilization resistance at high temperatures. PEEK can also be tailored into patient-specific implants for treating orbital and craniofacial defects in combination with additive manufacturing process. However, PEEK is bioinert, lacking osseointegration after implantation. Accordingly, several approaches including surface roughening, thin film coating technology, and addition of bioactive hydroxyapatite (HA) micro-/nanofillers have been adopted to improve osseointegration performance. The elastic modulus of PEEK is 3.7-4.0 GPa, being considerably lower than that of human cortical bone ranging from 7-30 GPa. Thus, PEEK is not stiff enough to sustain applied stress in load-bearing orthopedic implants. Therefore, HA micro-/nanofillers, continuous and discontinuous carbon fibers are incorporated into PEEK for enhancing its stiffness for load-bearing applications. Among these, carbon fibers are more effective than HA micro-/nanofillers in providing additional stiffness and load-bearing capabilities. In particular, the tensile properties of PEEK composite with 30wt% short carbon fibers resemble those of cortical bone. Hydrophobic PEEK shows no degradation behavior, thus hampering its use for making porous bone scaffolds. PEEK can be blended with hydrophilic polymers such as polyglycolic acid and polyvinyl alcohol to produce biodegradable scaffolds for bone tissue engineering applications.

Bioactive-Enhanced Polyetheretherketone Dental Implant Materials: Mechanical Characterization and Cellular Responses

The aim of this study was to characterize the mechanical properties of a bioactive-modified polyetheretherketone (PEEK) manufacturing approach for dental implants and to compare the in vitro biological behavior with titanium alloy (Ti6Al4V) as the reference. PEEK, PEEK with 5% hydroxyapatite (HA), PEEK with 5% beta-tricalcium phosphate (βTCP), and Ti6Al4V discs were produced using hot pressing technology to create a functionally graded material (FGM). Surface roughness values (Ra, Rz), water contact angle, shear bond strength, and Vickers hardness tests were performed. Human osteoblasts and gingival fibroblasts bioactivity was evaluated by a resazurin-based method, alkaline phosphatase activity (ALP), and confocal laser scanning microscopy (CLSM) images of fluorescent-stained fibroblasts. Morphology and cellular adhesion were confirmed using field emission gun-scanning electron microscopy (FEG-SEM). Group comparisons were tested using analysis of variance (Tukey post hoc test), α = .05. All groups presented similar roughness values (P &gt; .05). Ti6Al4V group was found to have the highest contact angle (P &lt; .05). Shear bond strength and Vickers hardness of different PEEK materials were similar (P &gt; .05); however, the mean values in the Ti6Al4V group were significantly higher when compared with those of the other groups (P &lt; .05). Cell viability and proliferation of osteoblast and fibroblast cells were higher in the PEEK group (P &lt; .05). PEEK-βTCP showed the highest significant ALP activity over time (P &lt; .05 at 14 days of culture). An enhanced bone and soft-tissue cell behavior on pure PEEK was obtained to the gold standard (Ti6Al4V) with equivalent roughness. The results substantiate the potential role of chemical composition rather than physical properties of materials in biological responses. The addition of 5% HA or βTCP by FGM did not enhance PEEK mechanical properties or periodontal cell behavior.

PEEK surface modification by fast ambient-temperature sulfonation for bone implant applications

We develop a simple, fast and economical surface treatment under ambient temperature to improve the hydrophilicity and osteoconductivity of polyetheretherketone (PEEK) for bone implant applications. A major challenge in bone implants is the drastic difference in stiffness between traditional implant materials (such as titanium and stainless steel) and human bone. PEEK is biocompatible with an elastic modulus closely matching that of human bone, making it a highly attractive alternative. However, its bio-inert and poorly hydrophilic surface presents a serious challenge for osseointegration. Sulfonation can improve hydrophilicity and introduce bioactive sulfonate groups, but PEEK sulfonation has traditionally been applied for fuel cells, employing elevated temperatures and long reaction times to re-cast PEEK into sulfonated films. Little research has systematically studied PEEK surface modification by short reaction time (seconds) and ambient-temperature sulfonation for biomedical applications. Here, we investigate three ambient-temperature sulfonation treatments under varying reaction times (5–90 s) and evaluate the hydrophilicity and morphology of 15 modified PEEK surfaces. We establish an optimal treatment using 30 s H₂SO₄ followed by 20 s rinsing, and then 20 s immersion in NaOH followed by 20 s rinsing. This 30 s ambient-temperature sulfonation is found to be more effective than conventional plasma treatments and reduced PEEK water contact angle from 78° to 37°.

Bioactive coating of zirconia toughened alumina ceramic implants improves cancellous osseointegration

Bioactive coatings have the potential to improve the bony integration of mechanically loaded orthopedic ceramic implants. Using the concept of mimicking the natural bone surface, four different coatings of varying thickness on a zirconia toughened alumina (ZTA) ceramic implant were investigated regarding their osseointegration in a drill-hole model in sheep. The hypothesis that a bioactive coating of ZTA ceramics would facilitate cancellous bone integration was investigated. The bioactive coatings consisted of either a layer of covalently bound multi phosphonate molecules (chemical modification = CM), a nano hydoxyapatite coating (HA), or two different bioactive glass (BG) coatings in micrometer thickness, forming a hydroxyl-carbonate apatite layer on the implant surface in vivo (dip-coated 45S5 = DipBG; sol-gel 70S30C = SGBG). Coated surfaces were characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. After 12 weeks, osseointegration was evaluated via mechanical push-out testing and histology. HA enhanced the maximum push-out force (HA: mean 3573.85 ± 1119.91 N; SGBG: mean 1691.57 ± 986.76 N; p = 0.046), adhesive shear strength (HA: mean 9.82 ± 2.89 MPA; SGBG: mean 4.57 ± 2.65 MPA; p = 0.025), and energy release rate (HA: mean 3821.95 ± 1474.13 J/mm²; SGBG: mean 1558.47 ± 923.47 J/mm²; p = 0.032) compared to SGBG. The implant-bone interfacial stiffness increased by CM compared to SGBG coating (CM: mean 6258.06 ± 603.80 N/mm; SGBG: mean 3565.57 ± 1705.31 n/mm; p = 0.038). Reduced mechanical osseointegration of SGBG coated implants could be explained histologically by a foreign body reaction surrounding the implants.

X-ray microtomographic characterization of highly rough titanium cold gas sprayed coating for identification of effective surfaces for osseointegration

A highly rough titanium coating obtained by Cold Gas Spray (CGS) has been characterized by means of high-resolution 3D microtomography (micro-CT) with the aim to evaluate its open and close porosity for possible use in orthopaedic implants to promote osseointegration. Micro-CT allowed a qualitative and quantitative description of the main features, morphology of the pores and surface roughness of the coating. Several numerical values were obtained to describe size, form and distribution of the closed/inner and open/outer pores. Additionally, surface roughness and open porosity were image-analyzed to find the effective surface for osseointegration.

PEEK materials as an alternative to titanium in dental implants: A systematic review

PURPOSE

Evaluation of the available research on PEEK materials to find that whether PEEK material has favorable properties and can enhance osseointegration, so that they can be utilize as implants material.

MATERIALS AND METHODS

An electronic and structured systematic search was undertaken in May 2018, without any restrictions of time in the Medline/Pubmed, Sci-hub, Ebscohost, Cochrane, and Web of Science databases. To identify other related references further hand search was done. Articles related to PEEK and their applications in implants were only included. Articles not available in abstract form and article other than English language were excluded.

RESULTS

Initially, the search resulted in 153 papers. Independent screenings of the abstracts were done by the reviewers to identify the articles related to the question in focus. Sixty-two studies were selected out of which 10 were further excluded due to not in English language. Two additional papers were obtained after hand searching, and finally 54 articles were included in the review.

CONCLUSIONS

Surface modification of PEEK seems to enhance the cell adhesion, proliferation, biocompability, and osteogenic properties of PEEK implant materials. PEEK had also influence the biofilm structure and reduces the chances of periimplant inflammations. Further research and more number of controlled clinical trials on PEEK implant is required in near future so that it can replace titanium in future.

Demineralized Bone Matrix Coating Si-Ca-P Ceramic Does Not Improve the Osseointegration of the Scaffold

The aim of this study was to manufacture and evaluate the effect of a biphasic calcium silicophosphate (CSP) scaffold ceramic, coated with a natural demineralized bone matrix (DBM), to evaluate the efficiency of this novel ceramic material in bone regeneration. The DBM-coated CSP ceramic was made by coating a CSP scaffold with gel DBM, produced by the partial sintering of different-sized porous granules. These scaffolds were used to reconstruct defects in rabbit tibiae, where CSP scaffolds acted as the control material. Micro-CT and histological analyses were performed to evaluate new bone formation at 1, 3, and 5 months post-surgery. The present research results showed a correlation among the data obtained by micro-CT and the histomorphological results, the gradual disintegration of the biomaterial, and the presence of free scaffold fragments dispersed inside the medullary cavity occupied by hematopoietic bone marrow over the 5-month study period. No difference was found between the DBM-coated and uncoated implants. The new bone tissue inside the implants increased with implantation time. Slightly less new bone formation was observed in the DBM-coated samples, but it was not statistically significant. Both the DBM-coated and the CSP scaffolds gave excellent bone tissue responses and good osteoconductivity.

Bioactive-hybrid-zirconia implant surface for enhancing osseointegration: an in vivo study

Background

Zirconia is characterized by a hard, dense, and chemically inert surface which requires additional surface treatments in order to enhance osseointegration. The proposed hypothesis of the study was that combination of a nano-porous surface infiltrated with a bioactive material may enhance osseointegration of zirconia implants.

Methods

Custom-made zirconia implants (3.7 mm × 8 mm) were designed, milled, and sintered according to manufacturer recommendations. All implants received selective infiltration etching (SIE) technique to produce a nano-porous surface. Surface porosities were either filled with nano-hydroxy apatite particle- or platelet-rich plasma while uncoated surface served as a control (n = 12, α = 0.05). New surface properties were characterized with mercury porosimetry, XRD analysis, SEM, and EDX analysis. Implants were inserted in femur head of rabbits, and histomorphometric analysis was conducted after healing time to evaluate bone–implant contact percentage (BIC%).

Results

Selective infiltration etching produced a nano-porous surface with interconnected surface porosities. Mercury porosimetry revealed a significant reduction in total porosity percent after application of the two coating materials. XRD patterns detected hexagonal crystal structure of HA superimposed on the tetragonal crystal phase of zirconia. Histomorphometric analysis indicated a significantly higher (F = 14.6, P < 0.001) BIC% around HA–bioactive–hybrid surface (79.8 ± 3%) and PRP-coated surface (71 ± 6 %) compared to the control (49 ± 8%).

Conclusions

Bioactive–hybrid–zirconia implant surface enhanced osseointegration of zirconia implants.

A short view on nanohydroxyapatite as coating of dental implants

INTRODUCTION

Titanium based (Ti-based) materials have been used as dental implants due to their high biocompatibility, good mechanical strength and ideal osseointegration properties. Osseointegration of an implant is dependent on surface characteristics such as surface chemistry and topography. Nanotechnology has presented new and interesting applications in dentistry in recent years. The presence of nanoparticles on the implant surface can affect both the topography and surface chemistry, leading to different and outstanding specifications for implant.

METHOD

A literature review was performed in electronic databases by means of MeSH keywords to collect relevant published literature in English about the effect of nanohydroxyapatite on osseointegration of titanium implants. No limitations on publication date were imposed. Data regarding titanium implants; nanotechnology; nanohydroxyapatite; osseointegration and cell attachment were collected and reviewed.

RESULTS AND CONCLUSION

According to reviewed literature, nanohydroxyapatites have a nanostructured surface with higher surface area and then higher reactivity, letting them to bind to bone creating a biomimetic coating on implants. However, more studies are needed on the cell-substrate interface to develop an effective implant due to the interaction of the cells and the biomaterial surface after the implantation.

Biomechanical, histological, and computed X-ray tomographic analyses of hydroxyapatite coated PEEK implants in an extended healing model in rabbit

A nanosized hydroxyapatite (HA) modification on polyetheretherketone (PEEK) using a novel spin coating technique was investigated in a rabbit model. Spin coating technique creates a 20-40 nm thick layer of nanosized HA particles with similar shape, size, and crystallinity as human bone. Some implants were designed with a perforating hole in the apical region to mimic a fusion chamber of a spinal implant. The coating nano-structures were assessed using a scanning electron microscope. The in vivo response to HA-PEEK was compared to untreated PEEK with respect to removal torque, histomorphometry, and computed microtomography. The HA-coated and pure PEEK implants were inserted in the tibia and femur bone according to simple randomization. The rabbits were sacrificed 20 weeks after implantation. Removal torque analysis showed significantly higher values for HA-PEEK. Qualitative histological evaluation revealed an intimate contact between PEEK and the bone at the threads and perforated hole. Histomorphometric assessment showed higher bone-implant and bone area values for HA-PEEK but without statistical significance. The effect of the HA coating showed most prominent effect in the removal torque which may be correlated to an alteration in the bone quality around the HA-PEEK implants. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1440-1447, 2018.

Formulation of a covalently bonded hydroxyapatite and poly(ether ether ketone) composite

Spinal fusion devices can be fabricated from composites based on combining hydroxyapatite and poly(ether ether ketone) phases. These implants serve as load-bearing scaffolds for the formation of new bone tissue between adjacent vertebrae. In this work, we report a novel approach to covalently bond hydroxyapatite and poly(ether ether ketone) to produce a novel composite formulation with enhanced interfacial adhesion between phases. Compared to non-linked composites (HA_PEEK), covalently linked composites (HA_L_PEEK), loaded with 1.25 vol% hydroxyapatite, possessed a greater mean flexural strength (170 ± 5.4 vs 171.7 ± 14.8 MPa (mean ± SD)) and modulus (4.8 ± 0.2 vs 5.0 ± 0.3 GPa (mean ± SD)). Although the mechanical properties were not found to be significantly different (p > 0.05), PEEK_L_HA contained substantially larger hydroxyapatite inclusions (100-1000 µm) compared to HA_PEEK (50-200 µm), due to the inherently agglomerative nature of the covalently bonded hydroxyapatite and poly(ether ether ketone) additive. Larger inclusions would expectedly weaken the HA_L_PEEK composite; however, there is no significant difference between the flexural modulus of poly(ether ether ketone) with respect to HA_L_PEEK (p = 0.13). In addition, the flexural modulus of HA_PEEK is significantly lower compared to poly(ether ether ketone) (p = 0.03). Ultimately, covalent linking reduces hydroxyapatite particulate de-bonding from the polymeric matrix and inhibits micro-crack development, culminating in enhanced transfer of stiffness between hydroxyapatite and poly(ether ether ketone) under loading.

Nanohydroxyapatite Effect on the Degradation, Osteoconduction and Mechanical Properties of Polymeric Bone Tissue Engineered Scaffolds

BACKGROUND

Statistical reports show that every year around the world approximately 15 million bone fractures occur; of which up to 10% fail to heal completely and hence lead to complications of non-union healing. In the past, autografts or allografts were used as the “gold standard” of treating such defects. However, due to various limitations and risks associated with these sources of bone grafts, other avenues have been extensively investigated through which bone tissue engineering; in particular engineering of synthetic bone graft substitutes, has been recognised as a promising alternative to the traditional methods.

METHODS

A selective literature search was performed.

RESULTS

Bone tissue engineering offers unlimited supply, eliminated risk of disease transmission and relatively low cost. It could also lead to patient specific design and manufacture of implants, prosthesis and bone related devices. A potentially promising building block for a suitable scaffold is synthetic nanohydroxyapatite incorporated into synthetic polymers. Incorporation of nanohydroxyapatite into synthetic polymers has shown promising bioactivity, osteoconductivity, mechanical properties and degradation profile compared to other techniques previously considered.

CONCLUSION

Scientific research, through extensive physiochemical characterisation, in vitro and in vivo assessment has brought together the optimum characteristics of nanohydroxyapatite and various types of synthetic polymers in order to develop nanocomposites of suitable nature for bone tissue engineering. The aim of the present article is to review and update various aspects involved in incorporation of synthetic nanohydroxyapatite into synthetic polymers, in terms of their potentials to promote bone growth and regeneration in vitro, in vivo and consequently in clinical applications.

Hydroxyapatite coating on PEEK implants: Biomechanical and histological study in a rabbit model

A bioactive two-layer coating consisting of hydroxyapatite (HA) and yttria-stabilized zirconia (YSZ) was investigated on cylindrical polyetheretherketone (PEEK) implants using ion beam assisted deposition (IBAD). Post-deposition heat treatments via variable frequency microwave annealing with and without subsequent autoclaving were used to crystallize the as-deposited amorphous HA layer. Microstructural analysis, performed by TEM and EDS, showed that these methods were capable of crystallizing HA coating on PEEK. The in vivo response to cylindrical PEEK samples with and without coating was studied by implanting uncoated PEEK and coated PEEK implants in the lateral femoral condyle of 18 rabbits. Animals were studied in two groups of 9 for observation at 6 or 18weeks post surgery. Micro-CT analysis, histology, and mechanical pull-out tests were performed to determine the effect of the coating on osseointegration. The heat-treated HA/YSZ coatings showed improved implant fixation as well as higher bone regeneration and bone-implant contact area compared to uncoated PEEK. The study offers a novel method to coat PEEK implants with improved osseointegration.

Polyether ether ketone implants achieve increased bone fusion when coated with nano-sized hydroxyapatite: a histomorphometric study in rabbit bone

Polyether ether ketone (PEEK) possesses excellent mechanical properties similar to those of human bone and is considered the best alternative material other than titanium for orthopedic spine and trauma implants. However, the deficient osteogenic properties and the bioinertness of PEEK limit its fields of application. The aim of this study was to limit these drawbacks by coating the surface of PEEK with nano-scaled hydroxyapatite (HA) minerals. In the study, the biological response to PEEK, with and without HA coating, was investigated. Twenty-four screw-like and apically perforated implants in the rabbit femur were histologically evaluated at 3 weeks and 12 weeks after surgery. Twelve of the 24 implants were HA coated (test), and the remaining 12 served as uncoated PEEK controls. At 3 weeks and 12 weeks, the mean bone–implant contact was higher for test compared to control (P<0.05). The bone area inside the threads was comparable in the two groups, but the perforating hole showed more bone area for the HA-coated implants at both healing points (P<0.01). With these results, we conclude that nano-sized HA coating on PEEK implants significantly improved the osteogenic properties, and in a clinical situation this material composition may serve as an implant where a rapid bone fusion is essential.

Synthesis and Characterization of Nanofibrous Polyaniline Thin Film Prepared by Novel Atmospheric Pressure Plasma Polymerization Technique

This work presents a study on the preparation of plasma-polymerized aniline (pPANI) nanofibers and nanoparticles by an intense plasma cloud type atmospheric pressure plasma jets (iPC-APPJ) device with a single bundle of three glass tubes. The nano size polymer was obtained at a sinusoidal wave with a peak value of 8 kV and a frequency of 26 kHz under ambient air. Discharge currents, photo-sensor amplifier, and optical emission spectrometer (OES) techniques were used to analyze the plasma produced from the iPC-APPJ device. Field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), gas chromatography-mass spectrometry (GC-MS), and gel permeation chromatography (GPC) techniques were used to analyze the pPANI. FE-SEM and TEM results show that pPANI has nanofibers, nanoparticles morphology, and polycrystalline characteristics. The FT-IR and GC-MS analysis show the characteristic polyaniline peaks with evidence that some quinone and benzene rings are broken by the discharge energy. GPC results show that pPANI has high molecular weight (M_w), about 533 kDa with 1.9 polydispersity index (PDI). This study contributes to a better understanding on the novel growth process and synthesis of uniform polyaniline nanofibers and nanoparticles with high molecular weights using the simple atmospheric pressure plasma polymerization technique.