Heteroepitaxy of Cerium Oxide Thin Films on Cu(111)

High-Entropy Oxide of (BiZrMoWCeLa)O2 as a Novel Catalyst for Vanadium Redox Flow Batteries

In this study, new fluorite high-entropy oxide (HEO), (BiZrMoWCeLa)O2, nanoparticles were produced using a surfactant-assisted hydrothermal technique followed by calcination and were used as novel catalytic materials for vanadium redox flow batteries (VRFBs). The HEO calcined at 750 °C (HEO-750) demonstrates superior electrocatalytic activity toward V3+/V2+ and VO2+/VO2+ redox couples compared to those of cells assembled with other samples. The charge-discharge tests further confirm that VRFBs using the HEO-750 catalyst demonstrate excellent Coulombic efficiency, voltage efficiency, and energy efficiency of 97.22, 87.47, and 85.04% at a current density of 80 mA cm-2 and 98.10, 74.76, and 73.34% at a higher current density of 160 mA cm-2, respectively. Moreover, with 500 charge-discharge cycles, there is no discernible degradation. These results are attributed to the calcination heat treatment, which induces the formation of a new single-phase fluorite structure, which facilitates the redox reactions of the vanadium redox couples. Furthermore, a high surface area, wettability, and plenty of oxygen vacancies can give more surface electroactive sites, improving the electrochemical performance, the charge transfer of the redox processes, and the stability of the VRFBs' electrode. This is the first report on the development of fluorite structure HEO nanoparticles in VRFBs, and it opens the door to further research into other HEOs.

High-temperature oxidation and reduction of the inverse ceria/Cu(111) catalyst characterized by LEED, STM, nc-AFM and KPFM

The inverse catalyst 'cerium oxide (ceria) on copper' has attracted much interest in recent time because of its promising catalytic activity in the water-gas-shift reaction and the hydrogenation of CO₂. For such reactions it is important to study the redox behaviour of this system, in particular with respect to the reduction by H₂. Here, we investigate the high-temperature O₂oxidation and H₂reduction of ceria nanoparticles (NPs) and a Cu(111) support by low energy electron diffraction (LEED), scanning tunnelling microscopy (STM), non-contact atomic force microscopy (nc-AFM) and Kelvin probe force microscopy (KPFM). After oxidation at 550 °C, the ceria NPs and the Cu(111) support are fully oxidized, with the copper oxide exhibiting a new oxide structure as verified by LEED and STM. We show that a high H₂dosage in the kilo Langmuir range is needed to entirely reduce the copper support at 550 °C. A work function (WF) difference of △ϕ_rCeria/Cu-Cu≈ -0.6 eV between the ceria NPs and the metallic Cu(111) support is measured, with the Cu(111) surface showing no signatures of separated and confined surface regions composed by an alloy of Cu and Ce. After oxidation, the WF difference is close to zero (△ϕ_Ceria/Cu-Cu≈ -0.1…0 eV), which probably is due to a WF change of both, ceria and copper.

Cerium Oxide-Tungsten Oxide Core-Shell Nanowire-Based Microsensors Sensitive to Acetone

Gas sensitive cerium oxide-tungsten oxide core-shell nanowires are synthesized and integrated directly into micromachined platforms via aerosol assisted chemical vapor deposition. Tests to various volatile organic compounds (acetone, ethanol, and toluene) involved in early disease diagnosis demonstrate enhanced sensitivity to acetone for the core-shell structures in contrast to the non-modified materials (i.e., only tungsten oxide or cerium oxide). This is attributed to the high density of oxygen vacancy defects at the shell, as well as the formation of heterojunctions at the core-shell interface, which provide the modified nanowires with ‘extra’ chemical and electronic sensitization as compared to the non-modified materials.