Compatibilized Immiscible Polymer Blends for Gas Separations

Enhancing Permeability: Unraveling the Potential of Microporous Organic Polymers in Mixed Matrix Membranes

Mixed matrix membranes (MMMs) were formed by using seven polymeric matrices with a wide range of permeabilities. All of the polymeric matrices have been polyimides, namely: P84, Pi-DAPOH, Pi-DAROH, Matrimid, Pi-HABAc, PI-DAM, and PIM-1 in the order of increasing O2 permeability. A fixed (10%) concentration of a microporous organic polymer (TFAP-Trp), formed by the combination of trifluoroacetophenone and triptycene, was added as a porous filler. The material properties as well as their separation performances for multiple pure gases, specifically the permeabilities of He, N2, O2, CH4, and CO2, were measured. The correlation between the relative increase in permeability in MMMs and that of the matrix polymeric membrane has been quantitatively analyzed. This study proves that the increased permeability of MMMs is largely linked to the contribution of the high permeability of the filler. The addition of the TFAP-Trp porous filler proves to be especially beneficial for matrices with low to moderate permeabilities, significantly enhancing the matrix permeability overall. The fitted relationship is approximately linear in accordance with the existing models to predict permeability in dual-phase systems for low proportions of the dispersed phase. An extrapolation allows the evaluation of the permeability of the pure microporous organic polymer, which agrees with the previous values described by the group for different filler contents and in other polymeric matrices. In all cases, the selectivity remains approximately constant while the permeability increases. The addition of TFAP-Trp to all the polymeric matrices led to a moderate improvement of the MMM separation performances, mainly centered on their permeabilities.

High performance compatible thiazole-based polymeric blend cellulose acetate membrane as selective CO2 absorbent and molecular sieve

Green blend membranes comprise of high thermal resistance ortho-linked thiazole-based polyimine (PM-4) including thioether linkage were fabricated in combination of glassy cellulose acetate (CA). The thermal stabilities of PMs were examined using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Morphological aspects and functional groups of the membranes were investigated via field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) analysis respectively. X-ray diffraction (XRD) and mechanical strength were determined as well. The effects of polyimine content, pressure and temperature were studied on CO₂ permeability (P) and selectivity. The pressure changes revealed exponentially increases on CO₂ permeability by plasticization, facilitated transfer and solution-diffusion mechanisms, but decreases on CH₄ and N₂ permeations. Remarkable permeation (P =  3000 Barrer) of CA/PM-4 (1:3 % w/w) and ideal selectivity ratios of CO₂/N₂ = 59, CO₂/CH₄ = 33.7 were obtained at 3 bar and 35 °C versus neat CA membrane.

Synthesis of Imidazolium based PILs and Investigation of Their Blend Membranes for Gas Separation

Polymeric (ionic liquid) (PIL) copolymers bearing cationic imidazolium pendants and polar acrylic acid groups (P(VBCImY-co-AA_x)), which both favor the interaction with CO₂ molecules, have been synthesized and blended with film forming, high glass transition temperature aromatic polyether-based pyridinium PILs (PILPyr). The blend membranes based on the above combination have been prepared and characterized in respect to their thermal and morphological behavior as well as to their gas separation properties. The used copolymers and blends showed a wide range of glass transition temperatures from 32 to 286 °C, while blends exhibited two phase morphology despite the presence of polar groups in the blend components that could participate in specific interactions. Finally, the membranes were studied in terms of their gas separation behavior. It revealed that blend composition, counter anion type and acrylic acid molar percentage affect the gas separation properties. In particular, PILPyr-TFSI/P(VBCImTFSI-co-AA₂₀) blend with 80/20 composition shows CO₂ permeability of 7.00 Barrer and quite high selectivity of 103 for the CO₂/CH₄ gas pair. Even higher CO₂/CH_4. selectivity of 154 was achieved for PILPyr-BF₄/P(VBCImBF₄-co-AA₁₀) blend with composition 70/30.

Scaffolding polymeric biomaterials: Are naturally occurring biological macromolecules more appropriate for tissue engineering?

Nowadays, tissue and organ failures resulted from injury, aging accounts, diseases or other type of damages is one of the most important health problems with an increasing incidence worldwide. Current treatments have limitations including, low graft efficiency, shortage of donor organs, as well as immunological problems. In this context, tissue engineering (TE) was introduced as a novel and versatile approach for restoring tissue/organ function using living cells, scaffold and bioactive (macro-)molecules. Among these, scaffold as a three-dimensional (3D) support material, provide physical and chemical cues for seeding cells and has an essential role in cell missions. Among the wide verity of scaffolding materials, natural or synthetic biopolymers are the most commonly biomaterials mainly due to their unique physicochemical and biological features. In this context, naturally occurring biological macromolecules are particular of interest owing to their low immunogenicity, excellent biocompatibility and cytocompatibility, as well as antigenicity that qualified them as popular choices for scaffolding applications. In this review, we highlighted the potentials of natural and synthetic polymers as scaffolding materials. The properties, advantages, and disadvantages of both polymer types as well as the current status, challenges, and recent progresses regarding the application of them as scaffolding biomaterials are also discussed.