Pentaethylenehexamine-Loaded Hierarchically Porous Silica for CO₂ Adsorption

Controllable Construction of Amino-Functionalized Dynamic Covalent Porous Polymers for High-Efficiency CO2 Capture from Flue Gas

The design of high-efficiency CO₂ adsorbents with low cost, high capacity, and easy desorption is of high significance for reducing carbon emissions, which yet remains a great challenge. This work proposes a facile construction strategy of amino-functional dynamic covalent materials for effective CO₂ capture from flue gas. Upon the dynamic imine assembly of N-site rich motif and aldehyde-based spacers, nanospheres and hollow nanotubes with spongy pores were constructed spontaneously at room temperature. A commercial amino-functional molecule tetraethylenepentamine could be facilely introduced into the dynamic covalent materials by virtue of the dynamic nature of imine assembly, thus inducing a high CO₂ capacity (1.27 mmol·g^-1) from simulated flue gas at 75 °C. This dynamic imine assembly strategy endowed the dynamic covalent materials with facile preparation, low cost, excellent CO₂ capacity, and outstanding cyclic stability, providing a mild and controllable approach for the development of competitive CO₂ adsorbents.

In Situ IR Study on Effect of Alkyl Chain Length between Amines on Its Stability against Acidic Gases

For the CO2 capture process via the cyclic adsorption/desorption method, one emerging catalyst is the use of amine-functionalized silica. This study focused on comparing the CO2 capture performance of diamines with ethyl and propyl spacers and the degradation species formed after long-term exposure to various acidic gases such as SO2 and NO2 at elevated temperatures. Adsorbents were prepared via the incipient wetness technique and then subjected to thermogravimetric measurements and in situ FT-IR analyses. 2NS-P/Kona95, which contains a propyl spacer, showed fewer degradation species formed based on its IR spectra and better stability with its long-term exposure to various acidic gases. Thus, the incorporation of amines with a large number of nitrogen groups of propyl or longer spacer length could be a promising CO2 capture material.

Study on Adsorption Mechanism and Failure Characteristics of CO₂ Adsorption by Potassium-Based Adsorbents with Different Supports

In order to obtain the adsorption mechanism and failure characteristics of CO₂ adsorption by potassium-based adsorbents with different supports, five types of supports (circulating fluidized bed boiler fly ash, pulverized coal boiler fly ash, activated carbon, molecular sieve, and alumina) and three kinds of adsorbents under the modified conditions of K₂CO₃ theoretical loading (10%, 30%, and 50%) were studied. The effect of the reaction temperature (50 °C, 60 °C, 70 °C, 80 °C, and 90 °C) and CO₂ concentration (5%, 7.5%, 10%, 12.5%, and 15%) on the adsorption of CO₂ by the adsorbent after loading and the effect of flue gas composition on the failure characteristics of adsorbents were obtained. At the same time, the microscopic characteristics of the adsorbents before and after loading and the reaction were studied by using a specific surface area and porosity analyzer as well as a scanning electron microscope and X-ray diffractometer. Combining its reaction and adsorption kinetics process, the mechanism of influence was explored. The results show that the optimal theoretical loading of the five adsorbents is 30% and the reaction temperature of 70 °C and the concentration of 12.5% CO₂ are the best reaction conditions. The actual loading and CO₂ adsorption performance of the K₂CO₃/AC adsorbent are the best while the K₂CO₃/Al₂O₃ adsorbent is the worst. During the carbonation reaction of the adsorbent, the cumulative pore volume plays a more important role in the adsorption process than the specific surface area. As the reaction temperature increases, the internal diffusion resistance increases remarkably. K₂CO₃/AC has the lowest activation energy and the carbonation reaction is the easiest to carry out. SO₂ and HCl react with K₂CO₃ to produce new substances, which leads to the gradual failure of the adsorbents and K₂CO₃/AC has the best cycle failure performance.