Applications of Discrete Wavelet Transform for Feature Extraction to Increase the Accuracy of Monitoring Systems of Liquid Petroleum Products

Research on Sea State Signal Recognition Based on Beluga Whale Optimization-Slope Entropy and One Dimensional-Convolutional Neural Network

This study introduces a novel nonlinear dynamic analysis method, known as beluga whale optimization-slope entropy (BWO-SlEn), to address the challenge of recognizing sea state signals (SSSs) in complex marine environments. A method of underwater acoustic signal recognition based on BWO-SlEn and one-dimensional convolutional neural network (1D-CNN) is proposed. Firstly, particle swarm optimization-slope entropy (PSO-SlEn), BWO-SlEn, and Harris hawk optimization-slope entropy (HHO-SlEn) were used for feature extraction of noise signal and SSS. After 1D-CNN classification, BWO-SlEn were found to have the best recognition effect. Secondly, fuzzy entropy (FE), sample entropy (SE), permutation entropy (PE), and dispersion entropy (DE) were used to extract the signal features. After 1D-CNN classification, BWO-SlEn and 1D-CNN were found to have the highest recognition rate compared with them. Finally, compared with the other six recognition methods, the recognition rates of BWO-SlEn and 1D-CNN for the noise signal and SSS are at least 6% and 4.75% higher, respectively. Therefore, the BWO-SlEn and 1D-CNN recognition methods proposed in this paper are more effective in the application of SSS recognition.

Application of MLP neural network to predict X-ray spectrum from tube voltage, filter material, and filter thickness used in medical imaging systems

The X-ray energy spectrum is crucial for image quality and dosage assessment in mammography, radiography, fluoroscopy, and CT which are frequently used for the diagnosis of many diseases including but not limited to patients with cardiovascular and cerebrovascular diseases. X-ray tubes have an electron filament (cathode), a tungsten/rubidium target (anode) oriented at an angle, and a metal filter (aluminum, beryllium, etc.) that may be placed in front of an exit window. When cathode electrons meet the anode, they generate X-rays with varied energies, creating a spectrum from zero to the electrons' greatest energy. In general, the energy spectrum of X-rays depends on the electron beam's energy (tube voltage), target angle, material, filter thickness, etc. Thus, each imaging system's X-ray energy spectrum is unique to its tubes. The primary goal of the current study is to develop a clever method for quickly estimating the X-ray energy spectrum for a variety of tube voltages, filter materials, and filter thickness using a small number of unique spectra. In this investigation, two distinct filters made of beryllium and aluminum with thicknesses of 0.4, 0.8, 1.2, 1.6, and 2 mm were employed to obtain certain limited X-ray spectra for tube voltages of 20, 30, 40, 50, 60, 80, 100, 130, and 150 kV. The three inputs of 150 Multilayer Perceptron (MLP) neural networks were tube voltage, filter type, and filter thickness to forecast the X-ray spectra point by point. After training, the MLP neural networks could predict the X-ray spectra for tubes with voltages between 20 and 150 kV and two distinct filters made of aluminum and beryllium with thicknesses between 0 and 2 mm. The presented methodology can be used as a suitable, fast, accurate and reliable alternative method for predicting X-ray spectrum in medical applications. Although a technique was put out in this work for a particular system that was the subject of Monte Carlo simulations, it may be applied to any genuine system.

Proposing an intelligent technique based on radial basis function neural network to forecast the energy spectrum of diagnostic X-ray imaging systems

In digital subtraction angiography (digital subtraction total cerebral angiography), cardiac and macrovascular cardiography, anorectal radiology, fluoroscopy, and computed tomography (CT), a prior knowledge to X-ray energy spectrum is crucial for assessing the image quality and also calculating patient X-ray dosage. The present investigation's main objective is to propose an intelligent technique for faster calculating X-ray energy spectrum of medical imaging systems with different exposure settings of tube voltage, filter material, and thickness based on limited specific spectra. In this study, Monte Carlo N Particle (MCNP) simulation code was initially used to generate some limited X-ray spectra for tube voltages of 20, 30, 40, 50, 80, 100, 130, and 150 kV for two different filters of beryllium and aluminum with thicknesses of 0. 4, 0.8, 1.2, 1.6 and 2 mm. Tube voltage, type, and thickness of filter were used as the 3 inputs of 150 Radial Basis Function Neural Network (RBFNN) to forecast point by point of the X-ray spectrum. After training, the RBFNNs could forecast most of the X-ray spectra for tube voltages in the range of 20-150 kV and two various filters of aluminum and beryllium with thicknesses in the range of 0-2 mm.

Air Kerma Calculation in Diagnostic Medical Imaging Devices Using Group Method of Data Handling Network

The air kerma, which is the amount of energy given off by a radioactive substance, is essential for medical specialists who use radiation to diagnose cancer problems. The amount of energy that a photon has when it hits something can be described as the air kerma (the amount of energy that was deposited in the air when the photon passed through it). Radiation beam intensity is represented by this value. Hospital X-ray equipment has to account for the heel effect, which means that the borders of the picture obtain a lesser radiation dosage than the center, and that air kerma is not symmetrical. The voltage of the X-ray machine can also affect the uniformity of the radiation. This work presents a model-based approach to predict air kerma at various locations inside the radiation field of medical imaging instruments, making use of just a small number of measurements. Group Method of Data Handling (GMDH) neural networks are suggested for this purpose. Firstly, a medical X-ray tube was modeled using Monte Carlo N Particle (MCNP) code simulation algorithm. X-ray tubes and detectors make up medical X-ray CT imaging systems. An X-ray tube's electron filament, thin wire, and metal target produce a picture of the electrons' target. A small rectangular electron source modeled electron filaments. An electron source target was a thin, 19,290 kg/m³ tungsten cube in a tubular hoover chamber. The electron source-object axis of the simulation object is 20° from the vertical. For most medical X-ray imaging applications, the kerma of the air was calculated at a variety of discrete locations within the conical X-ray beam, providing an accurate data set for network training. Various locations were taken into account in the aforementioned voltages inside the radiation field as the input of the GMDH network. For diagnostic radiology applications, the trained GMDH model could determine the air kerma at any location in the X-ray field of view and for a wide range of X-ray tube voltages with a Mean Relative Error (MRE) of less than 0.25%. This study yielded the following results: (1) The heel effect is included when calculating air kerma. (2) Computing the air kerma using an artificial neural network trained with minimal data. (3) An artificial neural network quickly and reliably calculated air kerma. (4) Figuring out the air kerma for the operating voltage of medical tubes. The high accuracy of the trained neural network in determining air kerma guarantees the usability of the presented method in operational conditions.

Introducing the Effective Features Using the Particle Swarm Optimization Algorithm to Increase Accuracy in Determining the Volume Percentages of Three-Phase Flows

What is presented in this research is an intelligent system for detecting the volume percentage of three-phase fluids passing through oil pipes. The structure of the detection system consists of an X-ray tube, a Pyrex galss pipe, and two sodium iodide detectors. A three-phase fluid of water, gas, and oil has been simulated inside the pipe in two flow regimes, annular and stratified. Different volume percentages from 10 to 80% are considered for each phase. After producing and emitting X-rays from the source and passing through the pipe containing a three-phase fluid, the intensity of photons is recorded by two detectors. The simulation is introduced by a Monte Carlo N-Particle (MCNP) code. After the implementation of all flow regimes in different volume percentages, the signals recorded by the detectors were recorded and labeled. Three frequency characteristics and five wavelet transform characteristics were extracted from the received signals of each detector, which were collected in a total of 16 characteristics from each test. The feature selection system based on the particle swarm optimization (PSO) algorithm was applied to determine the best combination of extracted features. The result was the introduction of seven features as the best features to determine volume percentages. The introduced characteristics were considered as the input of a Multilayer Perceptron (MLP) neural network, whose structure had seven input neurons (selected characteristics) and two output neurons (volume percentage of gas and water). The highest error obtained in determining volume percentages was equal to 0.13 as MSE, a low error compared with previous works. Using the PSO algorithm to select the most optimal features, the current research’s accuracy in determining volume percentages has significantly increased.

Increasing the Accuracy and Optimizing the Structure of the Scale Thickness Detection System by Extracting the Optimal Characteristics Using Wavelet Transform

Loss of energy, decrement of efficiency, and decrement of the effective diameter of the oil pipe are among the consequences of scale inside oil condensate transfer pipes. To prevent these incidents and their consequences and take timely action, it is important to detect the amount of scale. One of the accurate diagnosis methods is the use of non-invasive systems based on gamma-ray attenuation. The detection method proposed in this research consists of a detector that receives the radiation sent by the gamma source with dual energy (radioisotopes 241Am and 133Ba) after passing through the test pipe with inner scale (in different thicknesses). This structure was simulated by Monte Carlo N Particle code. The simulation performed in the test pipe included a three-phase flow consisting of water, gas, and oil in a stratified flow regime in different volume percentages. The signals received by the detector were processed by wavelet transform, which provided sufficient inputs to design the radial basis function (RBF) neural network. The scale thickness value deposited in the pipe can be predicted with an MSE of 0.02. The use of a detector optimizes the structure, and its high accuracy guarantees the usefulness of its use in practical situations.

Application of Artificial Intelligence for Determining the Volume Percentages of a Stratified Regime’s Three-Phase Flow, Independent of the Oil Pipeline’s Scale Thickness

As time passes, scale builds up inside the pipelines that deliver the oil or gas product from the source to processing plants or storage tanks, reducing the inside diameter and ultimately wasting energy and reducing efficiency. A non-invasive system based on gamma-ray attenuation is one of the most accurate diagnostic methods to detect volumetric percentages in different conditions. A system including two NaI detectors and dual-energy gamma sources (241Am and 133Ba radioisotopes) is the recommended requirement for modeling a volume-percentage detection system using Monte Carlo N particle (MCNP) simulations. Oil, water, and gas form a three-phase flow in a stratified-flow regime in different volume percentages, which flows inside a scaled pipe with different thicknesses. Gamma rays are emitted from one side, and photons are absorbed from the other side of the pipe by two scintillator detectors, and finally, three features with the names of the count under Photopeaks 241Am and 133Ba of the first detector and the total count of the second detector were obtained. By designing two MLP neural networks with said inputs, the volumetric percentages can be predicted with an RMSE of less than 1.48 independent of scale thickness. This low error value guarantees the effectiveness of the intended method and the usefulness of using this approach in the petroleum and petrochemical industries.

Optimizing the Gamma Ray-Based Detection System to Measure the Scale Thickness in Three-Phase Flow through Oil and Petrochemical Pipelines in View of Stratified Regime

As the oil and petrochemical products pass through the oil pipeline, the sediment scale settles, which can cause many problems in the oil fields. Timely detection of the scale inside the pipes and taking action to solve it prevents problems such as a decrease in the efficiency of oil equipment, the wastage of energy, and the increase in repair costs. In this research, an accurate detection system of the scale thickness has been introduced, which its performance is based on the attenuation of gamma rays. The detection system consists of a dual-energy gamma source (241 Am and 133 Ba radioisotopes) and a sodium iodide detector. This detection system is placed on both sides of a test pipe, which is used to simulate a three-phase flow in the stratified regime. The three-phase flow includes water, gas, and oil, which have been investigated in different volume percentages. An asymmetrical scale inside the pipe, made of barium sulfate, is simulated in different thicknesses. After irradiating the gamma-ray to the test pipe and receiving the intensity of the photons by the detector, time characteristics with the names of sample SSR, sample mean, sample skewness, and sample kurtosis were extracted from the received signal, and they were introduced as the inputs of a GMDH neural network. The neural network was able to predict the scale thickness value with an RMSE of less than 0.2, which is a very low error compared to previous research. In addition, the feature extraction technique made it possible to predict the scale value with high accuracy using only one detector.

Application of Wavelet Characteristics and GMDH Neural Networks for Precise Estimation of Oil Product Types and Volume Fractions

Given that one of the most critical operations in the oil and gas industry is to instantly determine the volume and type of product passing through the pipelines, in this research, a detection system for monitoring oil pipelines is proposed. The proposed system works in such a way that the radiation from the dual-energy source which symmetrically emits radiation, was received by the NaI detector after passing through the shield window and test pipeline. In the test pipe, four petroleum products—ethylene glycol, crude oil, gasoil, and gasoline—were simulated in pairs in different volume fractions. A total of 118 simulations were performed, and their signals were categorized. Then, feature extraction operations were started to reduce the volume of data, increase accuracy, increase the learning speed of the neural network, and better interpret the data. Wavelet features were extracted from the recorded signal and used as GMDH neural network input. The signals of each test were divided into details and approximation sections and characteristics with the names STD of A3, D3, D2 and were extracted. This described structure is modelled in the Monte Carlo N Particle code (MCNP). In fact, precise estimation of oil product types and volume fractions were done using a combination of symmetrical source and asymmetrical neural network. Four GMDH neural networks were trained to estimate the volumetric ratio of each product, and the maximum RMSE was 0.63. In addition to this high accuracy, the low implementation and computational cost compared to previous detection methods are among the advantages of present investigation, which increases its application in the oil industry.

Increasing the Efficiency of a Control System for Detecting the Type and Amount of Oil Product Passing through Pipelines Based on Gamma-Ray Attenuation, Time Domain Feature Extraction, and Artificial Neural Networks

Instantaneously determining the type and amount of oil product passing through pipelines is one of the most critical operations in the oil, polymer and petrochemical industries. In this research, a detection system is proposed in order to monitor oil pipelines. The system uses a dual-energy gamma source of americium-241 and barium-133, a test pipe, and a NaI detector. This structure is implemented in the Monte Carlo N Particle (MCNP) code. It should be noted that the results of this simulation have been validated with a laboratory structure. In the test pipe, four oil products—ethylene glycol, crude oil, gasoil, and gasoline—were simulated two by two at various volume percentages. After receiving the signal from the detector, the feature extraction operation was started in order to provide suitable inputs for training the neural network. Four time characteristics—variance, fourth order moment, skewness, and kurtosis—were extracted from the received signal and used as the inputs of four Radial Basis Function (RBF) neural networks. The implemented neural networks were able to predict the volume ratio of each product with great accuracy. High accuracy, low cost in implementing the proposed system, and lower computational cost than previous detection methods are among the advantages of this research that increases its applicability in the oil industry. It is worth mentioning that although the presented system in this study is for monitoring of petroleum fluids, it can be easily used for other types of fluids such as polymeric fluids.

Employing GMDH-Type Neural Network and Signal Frequency Feature Extraction Approaches for Detection of Scale Thickness inside Oil Pipelines

In this paper, gamma attenuation has been utilised as a veritable tool for non-invasive estimation of the thickness of scale deposits. By simulating flow regimes at six volume percentages and seven scale thicknesses of a two phase-flow in a pipe, our study utilised a dual-energy gamma source with Ba-133 and Cs-137 radioisotopes, a steel pipe, and a 2.54 cm × 2.54 cm sodium iodide (NaI) photon detector to analyse three different flow regimes. We employed Fourier transform and frequency characteristics (specifically, the amplitudes of the first to fourth dominant frequencies) to transform the received signals to the frequency domain, and subsequently to extract the various features of the signal. These features were then used as inputs for the group method for data Hiding (GMDH) neural network framework used to predict the scale thickness inside the pipe. Due to the use of appropriate features, our proposed technique recorded an average root mean square error (RMSE) of 0.22, which is a very good error compared to the detection systems presented in previous studies. Moreover, this performance is indicative of the utility of our GMDH neural network extraction process and its potential applications in determining parameters such as type of flow regime, volume percentage, etc. in multiphase flows and across other areas of the oil and gas industry.

Enhanced Gamma-Ray Attenuation-Based Detection System Using an Artificial Neural Network

Scale deposition is the accumulation of various materials in the walls of transmission lines and unwanted parts in the oil and gas production system. It is a leading moot point in all transmission lines, tanks, and petroleum equipment. Scale deposition leads to drastic detrimental problems, reduced permeability, pressure and production losses, and direct financial losses due to the failure of some equipment. The accumulation of oil and gas leads to clogged pores and obstruction of fluid flow. Considering the passage of a two-phase flow, our study determines the thickness of the scale, and the flow regime is detected with the help of two Multilayer Perceptron (MLP) networks. First, the diagnostic system consisting of a dual-energy source, a steel pipe, and a NaI detector was implemented, using the Monte Carlo N Particle Code (MCNP). Subsequently, the received signals were processed, and properties were extracted using the wavelet transform technique. These features were considered as inputs of an Artificial Neural Network (ANN) model used to determine the type of flow regimes and predict the scale thickness. By accurately classifying the flow regimes and determining the scale inside the pipe, our proposed method provides a platform that could enhance many areas of the oil industry.

Introducing a Precise System for Determining Volume Percentages Independent of Scale Thickness and Type of Flow Regime

When fluids flow into the pipes, the materials in them cause deposits to form inside the pipes over time, which is a threat to the efficiency of the equipment and their depreciation. In the present study, a method for detecting the volume percentage of two-phase flow by considering the presence of scale inside the test pipe is presented using artificial intelligence networks. The method is non-invasive and works in such a way that the detector located on one side of the pipe absorbs the photons that have passed through the other side of the pipe. These photons are emitted to the pipe by a dual source of the isotopes barium-133 and cesium-137. The Monte Carlo N Particle Code (MCNP) simulates the structure, and wavelet features are extracted from the data recorded by the detector. These features are considered Group methods of data handling (GMDH) inputs. A neural network is trained to determine the volume percentage with high accuracy independent of the thickness of the scale in the pipe. In this research, to implement a precise system for working in operating conditions, different conditions, including different flow regimes and different scale thickness values as well as different volume percentages, are simulated. The proposed system is able to determine the volume percentages with high accuracy, regardless of the type of flow regime and the amount of scale inside the pipe. The use of feature extraction techniques in the implementation of the proposed detection system not only reduces the number of detectors, reduces costs, and simplifies the system but also increases the accuracy to a good extent.

Application of Neural Network and Time-Domain Feature Extraction Techniques for Determining Volumetric Percentages and the Type of Two Phase Flow Regimes Independent of Scale Layer Thickness

One of the factors that significantly affects the efficiency of oil and gas industry equipment is the scales formed in the pipelines. In this innovative, non-invasive system, the inclusion of a dual-energy gamma source and two sodium iodide detectors was investigated with the help of artificial intelligence to determine the flow pattern and volume percentage in a two-phase flow by considering the thickness of the scale in the tested pipeline. In the proposed structure, a dual-energy gamma source consisting of barium-133 and cesium-137 isotopes emit photons, one detector recorded transmitted photons and a second detector recorded the scattered photons. After simulating the mentioned structure using Monte Carlo N-Particle (MCNP) code, time characteristics named 4th order moment, kurtosis and skewness were extracted from the recorded data of both the transmission detector (TD) and scattering detector (SD). These characteristics were considered as inputs of the multilayer perceptron (MLP) neural network. Two neural networks that were able to determine volume percentages with high accuracy, as well as classify all flow regimes correctly, were trained.