Assessing the Performance of Thin-Film Nanofiltration Membranes with Embedded Montmorillonites

Efficiency evaluation of titanium oxide nanocomposite membrane in adsorption of chromium from oil effluents

Reverse osmosis and nanofiltration (NF) are the essential physical separation technologies used to remove contaminants from liquid streams. A hybrid of nanofiltration and forward osmosis (FO) was used to increase the removal efficiency of heavy metals in synthesized oil effluents. Thin-film nanocomposite (TFN) membranes were synthesized by applying surface polymerization on a polysulfone substrate to use in the forward osmosis process. The impact of different membrane fabrication conditions such as time, temperature, and pressure on effluent flux, the effect of different concentrations of the heavy metal solution on adsorption rate and sedimentation rate, the impact of TiO₂ nanoparticles on the performance and structure of forward osmosis membranes were investigated. The morphology, composition, and properties of TiO₂ nanocomposites made by the infrared spectrometer and X-ray diffraction (XRD) were studied. Kinetic modeling and Langmuir, Freundlich, and Tamkin relationships were used to draw adsorption isotherms and evaluate adsorption equilibrium data. The results indicated that pressure and temperature directly affect water outlet flux, and time affects it indirectly. Evaluating the isothermal relationships revealed that chromium adsorption from the TFN 0.05 ppm membrane and thin-film composite (TFC) membrane follows the Langmuir model with correlation coefficients of 0.996 and 0.995, respectively. The significant removal of heavy metals and the acceptable amount of water flux demonstrated the appropriate potential of the titanium oxide nanocomposite membrane, which can be used as an effective adsorbent to remove chromium from aqueous solutions.

Alginate Hydrogel Assisted Controllable Interfacial Polymerization for High-Performance Nanofiltration Membranes

The deepening crisis of freshwater resources has been driving the further development of new types of membrane-based desalination technologies represented by nanofiltration membranes. Solving the existing trade-off limitation on enhancing the water permeance and the rejection of salts is currently one of the most concerned research interests. Here, a facile and scalable approach is proposed to tune the interfacial polymerization by constructing a calcium alginate hydrogel layer on the porous substrates. The evenly coated thin hydrogel layer can not only store amine monomers like the aqueous phase but also suppress the diffusion of amine monomers inside, as well as provide a flat and stable interface to implement the interfacial polymerization. The resultant polyamide nanofilms have a relatively smooth morphology, negatively charged surface, and reduced thickness which facilitate a fast water permeation while maintaining rejection efficiency. As a result, the as-prepared composite membranes show improved water permeance (~30 Lm⁻²h⁻¹bar⁻¹) and comparable rejection of Na₂SO₄ (>97%) in practical applications. It is proved to be a feasible approach to manufacturing high-performance nanofiltration membranes with the assist of alginate hydrogel regulating interfacial polymerization.

Progress of Interfacial Polymerization Techniques for Polyamide Thin Film (Nano)Composite Membrane Fabrication: A Comprehensive Review

In this paper, we review various novel/modified interfacial polymerization (IP) techniques for the fabrication of polyamide (PA) thin film composite (TFC)/thin film nanocomposite (TFN) membranes in both pressure-driven and osmotically driven separation processes. Although conventional IP technique is the dominant technology for the fabrication of commercial nanofiltration (NF) and reverse osmosis (RO) membranes, it is plagued with issues of low membrane permeability, relatively thick PA layer and susceptibility to fouling, which limit the performance. Over the past decade, we have seen a significant growth in scientific publications related to the novel/modified IP techniques used in fabricating advanced PA-TFC/TFN membranes for various water applications. Novel/modified IP lab-scale studies have consistently, so far, yielded promising results compared to membranes made by conventional IP technique, in terms of better filtration efficiency (increased permeability without compensating solute rejection), improved chemical properties (crosslinking degree), reduced surface roughness and the perfect embedment of nanomaterials within selective layers. Furthermore, several new IP techniques can precisely control the thickness of the PA layer at sub-10 nm and significantly reduce the usage of chemicals. Despite the substantial improvements, these novel IP approaches have downsides that hinder their extensive implementation both at the lab-scale and in manufacturing environments. Herein, this review offers valuable insights into the development of effective IP techniques in the fabrication of TFC/TFN membrane for enhanced water separation.