2,6-Bis((benzoyl-R)amino)pyridine (R = H, 4-Me, and 4-NMe2) Derivatives for the Removal of Cu(II), Ni(II), Co(II), and Zn(II) Ions from Aqueous Solutions in Classic Solvent Extraction and a Membrane Extraction

The Application of Polymer Inclusion Membranes for the Removal of Emerging Contaminants and Synthetic Dyes from Aqueous Solutions-A Mini Review

Pollution of the environment, including water resources, is currently one of the greatest challenges due to emerging new contaminants of anthropogenic origin. Of particular concern are emerging organic pollutants such as pharmaceuticals, endocrine disruptors, and pesticides, but also other industrial pollutants, for example, synthetic dyes. The growing demand for environmentally friendly and economical methods of removing emerging contaminants and synthetic dyes from wastewater resulted in increased interest in the possibility of using techniques based on the application of polymer inclusion membranes (PIMs) for this purpose. PIM-based techniques are promising methods for eliminating emerging contaminants and synthetic dyes from aqueous solutions, including wastewater, due to high efficiency, membranes versatility, ease/low cost of preparation, and high selectivity. This review describes the latest developments related to the removal of various emerging contaminants and synthetic dyes from aqueous solutions using PIMs over the past few years, with particular emphasis on research aimed at increasing the effectiveness and selectivity of PIMs, which may contribute to wider use of these methods in the future.

The Use of Polymer Inclusion Membranes for the Removal of Metal Ions from Aqueous Solutions-The Latest Achievements and Potential Industrial Applications: A Review

The growing demand for environmentally friendly and economical methods of removing toxic metal ions from polluted waters and for the recovery of valuable noble metal ions from various types of waste, which are often treated as their secondary source, has resulted in increased interest in techniques based on the utilization of polymer inclusion membranes (PIMs). PIMs are characterized by many advantages (e.g., the possibility of simultaneous extraction and back extraction, excellent stability and high reusability), and can be adapted to the properties of the removed target analyte by appropriate selection of carriers, polymers and plasticizers used for their formulation. However, the selectivity and efficiency of the membrane process depends on many factors (e.g., membrane composition, nature of removed metal ions, composition of aqueous feed solution, etc.), and new membranes are systematically designed to improve these parameters. Numerous studies aimed at improving PIM technology may contribute to the wider use of these methods in the future on an industrial scale, e.g., in wastewater treatment. This review describes the latest achievements related to the removal of various metal ions by PIMs over the past 3 years, with particular emphasis on solutions with potential industrial application.

Silver Nanoparticles Functionalized with Sodium Mercaptoethane Sulfonate to Remove Copper from Water by the Formation of a Micellar Phase

This work presents a novel procedure for the removal of Cu2+ from water, an essential element in human nutrition considered toxic in high concentrations, based on a microextraction technique involving the formation of a micellar phase. To achieve the total elimination of copper from aqueous samples, a Cu2+-complexing reagent based on silver nanoparticles functionalized with sodium mercaptoethane sulfonate (AgNPs@MESNa) was used. The complex formed by Cu2+ and the reagent was extracted into a micellar microphase formed by Triton X-114, a harmless surfactant. Volumes of 200 µL of the 10−4 mol L−1 suspension of AgNPs@MESNa and 100 µL of a solution of Triton X-114 at 30% m/m were employed to successfully remove 10 mg L−1 of Cu from 20 mL of water samples. The time and temperature needed to achieve 100% microextraction efficiency were 10 min and 40 °C, respectively. The procedure is considered environmentally friendly due to the low volume of the extracting phase and the simple experimental conditions that achieve total removal of Cu2+ from water samples.

Removal of copper ions by functionalized biochar based on a multicomponent Ugi reaction

Copper is widely present in the natural environment and inevitably poses a risk to both human health and the natural environment. Biochar is an inexpensive, clean and sustainable sorbent material that can be used as a resource for copper removal, and there is interest in new ways to chemically treat biochar to tune its unique properties and modify its atomic structure. In this study, biochar was oxidized, and then polyethyleneimine (PEI) modified chitosan and carboxylated biochar were economically compounded through a multicomponent Ugi reaction to effectively remove Cu(ii). PEI enhances the adsorption of Cu(ii) within an optimum solution pH range of 3.5–5.5. The adsorption process follows a pseudo-second-order kinetic model. When the dosage of BC-NH2 was 4 g L⁻¹ and the temperature was 303 K, the maximum adsorption capacity calculated by the Langmuir model was 26.67 mg g⁻¹. The adsorption process of Cu(ii) on BC-NH2 was heat-trapping and spontaneous. BC-NH2 showed good selectivity for K⁺ and Mg²⁺, and BC-NH2 desorbed by NaOH showed better adsorption performance than H₂SO₄ in the adsorption–desorption cycle. Characterization by SEM, EDS, BET, FTIR, TGA and XPS showed successful coupling and that the amide group of BC-NH2 had chelated with Cu(ii). This atomically economical multicomponent Ugi reaction provides a new option for preparing composite materials that effectively remove heavy metals.

Polyethyleneimine-modified chitosan and carboxylated biochar were economically compounded by a multicomponent Ugi reaction to produce products rich in amide functional groups.