An Improved Modelling Approach for the Comprehensive Study of Direct Contact Membrane Distillation

Porosity Effect of Polystyrene Membranes on Desalination Performance: A Combined Experimental and Numerical Heat and Mass Transfer Study in Direct Contact Membrane Distillation

Membrane distillation (MD) is a thermal-based membrane operation with high potential for use in the treatment of aqueous streams. In this study, the linear relationship between the permeate flux and the bulk feed temperature for different electrospun polystyrene membranes is discussed. The dynamics of combined heat and mass transfer mechanisms across different membrane porosities of 77%, 89%, and 94%, each with different thicknesses, are examined. The main results for the effect of porosity with respect to the thermal efficiency and evaporation efficiency of the DCMD system are reported for electrospun polystyrene membranes. A 14.6% increase in thermal efficiency was noted for a 15% increase in membrane porosity. Meanwhile, a 15.6% rise in porosity resulted in a 5% increase in evaporation efficiency. A mathematical validation along with computational predictions is presented and interlinked with the maximum thermal and evaporation efficiencies for the surface membrane temperatures at the feed and temperature boundary regions. This work helps to further understand the interlinked correlations of the surface membrane temperatures at the feed and temperature boundary regions with respect to the change in membrane porosity.

Unique Behaviors and Mechanism of Highly Soluble Salt-Induced Wetting in Membrane Distillation

Scaling-induced wettinggreatly limits the application of membrane distillation (MD) for the desalination of high-salinity feed. Although highly soluble salts (e.g., NaCl) have high concentrations in this water, their scaling-induced wetting remains overlooked. To unravel the elusive wetting behaviors of highly soluble salts, in this study, we systematically investigated the scaling formation and wetting progress by in situ observation with optical coherence tomography (OCT). Through examining the influence of salt type and vapor flux on the wetting behavior, we revealed that highly soluble salt-induced wetting, especially under high vapor flux, shared several unique features: (1) occurring before the bulk feed reached saturation, (2) no scale layer formation observed, and (3) synchronized wetting progress on the millimeter scale. We demonstrated that a moving scale layer caused these interesting phenomena. The initial high vapor flux induced high concentration and temperature polarizations, which led to crystallization at the gas-liquid interface and the formation of an initial scale layer. On the one hand, this scale layer bridged the water into the hydrophobic pores; on the other hand, it blocked the membrane pores and reduced the vapor flux. In this way, the decreased vapor flux mitigated the concentration/temperature polarizations, and consequently led to the dissolution of the feed-facing side of the scale layer. This dissolution prevented the membrane pores from being completely blocked, facilitating the transportation and crystallization of salts at the distillate-facing side of the scale layer (i.e., the gas-liquid interface), thus the proceeding of the wetting layer.

Simulation and Experimental Investigation of the Vacuum-Enhanced Direct Membrane Distillation Driven by a Low-Grade Heat Source

Vacuum-enhanced direct contact membrane distillation (VEDCMD) has been proven experimentally to improve the permeate flux, compared with direct contact membrane distillation (DCMD). However, the theoretical mechanism for its transmembrane transfer process has not been revealed sufficiently. In this paper, with full consideration of the different driving forces of diffusion and Poiseuille flow under the vacuum enhancing condition, a theoretical transmembrane model for mass and heat transfer in VEDCMD is proposed. The CFD model and experimental platform are established to verify the theoretical model. The simulated results agree with the experimental data well, and nearly 200% improvement of the permeate flux is obtained when the permeate pressure drops to 30 kPa. The flow fields of the flow along the membrane surface are obtained and analyzed, with good consistency in the variation of the permeate flux. Since all the parameters of the proposed model are independent of the operating condition, the model is much easier for use and has better adaptability to fluctuating operating conditions.