A Dopamine/Tannic-Acid-Based Co-Deposition Combined with Phytic Acid Modification to Enhance the Anti-Fouling Property of RO Membrane

Graphene Oxide Surface Modification of Reverse Osmosis (RO) Membrane via Langmuir-Blodgett Technique: Balancing Performance and Antifouling Properties

The reverse osmosis water treatment process is prone to fouling issues, prompting the exploration of various membrane modification techniques to address this challenge. The primary objective of this study was to develop a precise method for modifying the surface of reverse osmosis membranes to enhance their antifouling properties. The Langmuir-Blodgett technique was employed to transfer aminated graphene oxide films assembled at the air-liquid interface, under specific surface pressure conditions, to the polyamide surface with pre-activated carboxylic groups. The microstructure and distribution of graphene oxide along the modified membrane were characterized using SEM, AFM, and Raman mapping techniques. Modification carried out at the optimal surface pressure value improved the membrane hydrophilicity and reduced the surface roughness, thereby enhancing the antifouling properties against colloidal fouling. The flux recovery ratio after modification increased from 65% to 87%, maintaining high permeability. The modified membranes exhibited superior performance compared to the unmodified membranes during long-term fouling tests. This membrane modification technique can be easily scaled using the roll-to-roll approach and requires minimal consumption of the modifier used.

Babesia duncani Pyruvate Kinase Inhibitor Screening and Identification of Key Active Amino Acid Residues

Babesia duncani (B. duncani), a protozoan parasite prevalent in North America, is a significant threat for human health. Given the regulatory role of pyruvate kinase I (PyK I) in glycolytic metabolism flux and ATP generation, PyK I has been considered the target for drug intervention for a long time. In this study, B. duncani PyK I (BdPyK I) was successfully cloned, expressed, and purified. Polyclonal antibodies were confirmed to recognize the native BdPyK I protein (56 kDa) using Western blotting. AlphaFold software predicted the three-dimensional structure of BdPyK I, and molecular docking with small molecules was conducted to identify potential binding sites of inhibitor on BdPyK I. Moreover, inhibitory effects of six inhibitors (tannic acid, apigenin, shikonin, PKM2 inhibitor, rosiglitazone, and pioglitazone) on BdPyK I were examined under the optimal enzymatic conditions of 3 mM PEP and 3 mM ADP, and significant activity reduction was found. Enzyme kinetics and growth inhibition assays further confirmed the reliability of these inhibitors, with PKM2 inhibitor, tannic acid, and apigenin exhibiting the highest selectivity index as specific inhibitors for B. duncani. Subsequently, key amino acid residues were mutated in both BdPyK I and Homo sapiens pyruvate kinase I (HPyK I), and two differential amino acid residues (isoleucine and phenylalanine) were identified between HPyK I and BdPyK I through PyK activity detection experiments. These findings lay foundation for understanding the role of PyK I in the growth and development of B. duncani, providing insights for babesiosis prevention and drug development.

Enhanced Anti-Biofouling Properties of BWRO Membranes via the Deposition of Poly (Catechol/Polyamine) and Ag Nanoparticles

The surface modification of reverse osmosis (RO) membranes to improve their anti-biofouling properties is gaining increased attention. Here, we modified the polyamide brackish water reverse osmosis (BWRO) membrane via the biomimetic co-deposition of catechol (CA)/tetraethylenepentamine (TEPA) and in situ growth of Ag nanoparticles. Ag ions were reduced into Ag nanoparticles (AgNPs) without extraneous reducing agents. The hydrophilic property of the membrane was improved, and the zeta potential was also increased after the deposition of poly (catechol/polyamine) and AgNPs. Compared with the original RO membrane, the optimized PCPA3-Ag10 membrane showed a slight reduction in water flux, and the salt rejection declined, but enhanced anti-adhesion and anti-bacterial activities were observed. The FDR_t of the PCPA3-Ag10 membranes during the filtration of BSA, SA and DTAB solution were 5.63 ± 0.09%, 18.34 ± 0.33% and 34.12 ± 0.15%, respectively, much better than those of the original membrane. Moreover, the PCPA3-Ag10 membrane exhibited a 100% reduction in the number of viable bacteria (B. subtilis and E. coli) inoculated on the membrane. The stability of the AgNPs was also high enough, and these results verify the effectiveness of poly (catechol/polyamine) and the AgNP-based modification strategy for the control of fouling.

Designing sustainable membrane-based water treatment via fouling control through membrane interface engineering and process developments

Membrane-based water treatment processes have been established as a powerful approach for clean water production. However, despite the significant advances made in terms of rejection and flux, provision of sustainable and energy-efficient water production is restricted by the inevitable issue of membrane fouling, known to be the major contributor to the elevated operating costs due to frequent chemical cleaning, increased transmembrane resistance, and deterioration of permeate flux. This review provides an overview of fouling control strategies in different membrane processes, such as microfiltration, ultrafiltration, membrane bioreactors, and desalination via reverse osmosis and forward osmosis. Insights into the recent advancements are discussed and efforts made in terms of membrane development, modules arrangement, process optimization, feed pretreatment, and fouling monitoring are highlighted to evaluate their overall impact in energy- and cost-effective water treatment. Major findings in four key aspects are presented, including membrane surface modification, modules design, process integration, and fouling monitoring. Among the above mentioned anti-fouling strategies, a large part of research has been focused on membrane surface modifications using a number of anti-fouling materials whereas much less research has been devoted to membrane module advancements and in-situ fouling monitoring and control. At the end, a critical analysis is provided for each anti-fouling strategy and a rationale framework is provided for design of efficient membranes and process for water treatment.

Recent advances in thin film nanocomposite membranes containing an interlayer (TFNi): fabrication, applications, characterization and perspectives

Polyamide (PA) reverse osmosis and nanofiltration membranes have been applied widely for desalination and wastewater reuse in the last 5-10 years. A novel thin-film nanocomposite (TFN) membrane featuring a nanomaterial interlayer (TFNi) has emerged in recent years and attracted the attention of researchers. The novel TFNi membranes are prepared from different nanomaterials and with different loading methods. The choices of intercalated nanomaterials, substrate layers and loading methods are based on the object to be treated. The introduction of nanostructured interlayers improves the formation of the PA separation layer and provides ultrafast water molecule transport channels. In this manner, the TFNi membrane mitigates the trade-off between permeability and selectivity reported for polyamide composite membranes. In addition, TFNi membranes enhance the removal of metal ions and organics and the recovery of organic solvents during nanofiltration and reverse osmosis, which is critical for environmental ecology and industrial applications. This review provides statistics and analyzes the developments in TFNi membranes over the last 5-10 years. The latest research results are reviewed, including the selection of the substrate and interlayer materials, preparation methods, specific application areas and more advanced characterization methods. Mechanistic aspects are analyzed to encourage future research, and potential mechanisms for industrialization are discussed.

Phytic acid/magnesium ion complex coating on PEEK fiber woven fabric as an artificial ligament with anti-fibrogenesis and osteogenesis for ligament-bone healing

Development of an artificial ligament possessing osteogenic activity to enhance ligament-bone healing for reconstruction of anterior cruciate ligament (ACL) is a great challenge. Herein, polyetheretherketone fibers (PKF) were coated with phytic acid (PA)/magnesium (Mg) ions complex (PKPM), which were woven into fabrics as an artificial ligament. The results demonstrated that PKPM with PA/Mg complex coating exhibited optimized surface properties with improved hydrophilicity and surface energy, and slow release of Mg ions. PKPM significantly enhanced responses of rat bone marrow stem cells in vitro. Moreover, PKPM remarkably promoted M2 macrophage polarization that upregulated production of anti-inflammatory cytokine while inhibited M1 macrophage polarization that downregulated production of pro-inflammatory cytokine in vitro. Further, PKPM inhibited fibrous encapsulation by preventing M1 macrophage polarization while promoted osteogenesis for ligament-bone healing by triggering M2 macrophage polarization in vivo. The results suggested that the downregulation of M1 macrophage polarization for inhibiting fibrogenesis and upregulation of M2 macrophage polarization for improving osteogenesis of PKPM were attributed to synergistic effects of PA and sustained release of Mg ions. In summary, PKPM with PA/Mg complex coating upregulated pro-osteogenic macrophage polarization that supplied a profitable anti-inflammatory environments for osteogenesis and ligament-bone healing, thereby possessing tremendous potential for reconstruction of ACL.

Development of dual-ligand titanium (IV) hydrophilic network sorbent for highly selective enrichment of phosphopeptides

A hydrophilic metal-organic network based on Ti⁴⁺ and dual natural ligand, tannic acid (TA) and phytic acid (PA), has been developed to enrich phosphopeptides from complex bio-samples prior to liquid chromatography-mass spectrometric analysis. Due to the strong chelation ability of TA and PA, abundant Ti⁴⁺ can be immobilized in the material, forming hydrophilic network by one-step coordination-driven self-assembly approach. The sorbent, TA-Ti-PA@Fe₃O₄, exhibited satisfactory selectivity for the phosphopeptides in the tryptic digest of β-casein, and can eliminate the interference components in 1000-fold excess of bovine serum albumin. The adsorption capacity of the sorbents for phosphopeptides was up to 35.2 mg g^-1 and the adsorbing equilibrium can be reached in 5 min. The adsorbing mechanism has been investigated and the results indicated that the Ti⁴⁺ in forms of [Ti(f-TA)(H₂O)₄]²⁺, [Ti(f-PA)(H₂O)₄]²⁺ and Ti(f-PA)₂(H₂O)₂ may play an important role in the adsorption process. The sorbent of the TA-Ti-PA@Fe₃O₄ has been applied to enrichment of the phosphopeptides in tryptic digest of rat liver lysate, and 3408 phosphopeptides have been identified, while the numbers of the identified phosphopeptides were 2730 and 1217 when the sample was enriched by the commercial TiO₂ and Fe³⁺-IMAC kit, respectively. This work provides a strategy to enrich phosphopeptides from complex samples and shows great potential application in phosphoproteome research.