On the Potential of a Poly(vinylidenefluoride-co-hexafluoropropylene) Polymer Inclusion Membrane Containing Aliquat® 336 and Dibutyl Phthalate for V(V) Extraction from Sulfate Solutions

Thorium Removal, Recovery and Recycling: A Membrane Challenge for Urban Mining

Although only a slightly radioactive element, thorium is considered extremely toxic because its various species, which reach the environment, can constitute an important problem for the health of the population. The present paper aims to expand the possibilities of using membrane processes in the removal, recovery and recycling of thorium from industrial residues reaching municipal waste-processing platforms. The paper includes a short introduction on the interest shown in this element, a weak radioactive metal, followed by highlighting some common (domestic) uses. In a distinct but concise section, the bio-medical impact of thorium is presented. The classic technologies for obtaining thorium are concentrated in a single schema, and the speciation of thorium is presented with an emphasis on the formation of hydroxo-complexes and complexes with common organic reagents. The determination of thorium is highlighted on the basis of its radioactivity, but especially through methods that call for extraction followed by an established electrochemical, spectral or chromatographic method. Membrane processes are presented based on the electrochemical potential difference, including barro-membrane processes, electrodialysis, liquid membranes and hybrid processes. A separate sub-chapter is devoted to proposals and recommendations for the use of membranes in order to achieve some progress in urban mining for the valorization of thorium.

Polymer Inclusion Membranes with P507-TBP Carriers for Lithium Extraction from Brines

The separation of lithium and magnesium from salt-lake brines with high Mg2+/Li+ ratios is a main challenge for lithium extraction. In this work, novel polymer inclusion membranes (PIMs) were developed by incorporating 2-ethylhexyl phosphonic acid mono 2-ethylhexyl (P507) and tributyl phosphate (TBP) as the carriers into cellulose triacetate (CTA) polymers. The Li+ could be stripped from the P507-TBP extracting carriers using pure water eluents without adding concentrated hydrochloric acid, which can help decrease carriers’ leakage risk from membrane matrixes and keep the stability of PIMs. The morphology, composition, and wettability of P507-TBP-based PIMs were characterized systematically, and the carrier content in the PIM was also optimized. In the transport experiment with the feed of 0.1 mol/L LiCl and 4.0 mol/L MgCl2, the CTA/P507-TBP60% membrane exhibits a Li+ permeability of 4.76 × 10−3 mol·m−2·h−1 and a Li/Mg separation ratio of 10.2. After recycling seven times, the selectivity of the PIM is well-retained (>10), and the permeability of Li+ decreases slightly (less than 15%). With a decent selectivity and excellent stability, PIMs containing P507-TBP carriers show great potential for sustainable and efficient lithium recovery from brines with high Mg/Li ratios.