A Literature Review of Modelling and Experimental Studies of Water Treatment by Adsorption Processes on Nanomaterials

Enhancing Self-Healing and Adhesion Bonding Properties: Investigating the Promising Potential of Ce-ZIF8 MOF Hybrid Thin Films as pH-Responsive Nanocoatings

Further modification of the pre-treated steel surface with cerium conversion coating was performed using a novel porous coordination polymer (PCP) based on zeolitic imidazole framework-8 (ZIF8) in order to reduce the defect and disorders of the surface. The treated mild steels (MS) with Ce (MS/Ce) and Ce-ZIF8 (MS/Ce-ZIF8) were characterized by the GIXRD, Raman, and FT-IR, and via contact angle and FE-SEM, their surface features were investigated. The protection performance of the samples against corrosion was evaluated in the saline solution media using electrochemical impedance spectroscopy (EIS, in the long term) and polarization tests. The results evidenced that applying the ZIF8 nanoparticles onto the Ce-treated steel surface increased the total resistance value after 24 h of immersion (49.47%). Afterward, the ZIF8-modified coating (MS/Ce and MS/Ce-ZIF8) impact on the epoxy coating protection function was characterized by EIS (in the scratched form), salt spray (5 wt % salts), cathodic disbonding (at 25 °C), and pull-off tests. The EIS outcomes of the scratched coatings proved approximately a 51.29% increase in R_t of the MS/Ce-ZIF8/EC sample compared with the MS/EC sample after 24 h of immersion. The cathodic disbonding test results after 24 h of exposure revealed that the delamination area of the coating decreased in the modified sample, and the delamination radius of the epoxy coating was about 4.78, 2.96, and 2.0 mm for the MS/EC, MS/Ce/EC, and MS/Ce-ZIF8/EC samples, respectively.

A novel terpolymer nanocomposite (carboxymethyl β-cyclodextrin-nano chitosan-glutaraldehyde) for the potential removal of a textile dye acid red 37 from water

Carboxymethyl β-cyclodextrin-nanochitosan-glutaraldehyde (CM-βCD:nChi:Glu) terpolymer was prepared as a nano-adsorbent for the removal of the anionic textile dye, acid red 37. The terpolymer nanocomposite formation and characterization were clarified by FTIR, XRD, scanning electron microscopy, TEM, Brunauer-Emmett-Teller specific surface area (BET-SSA), and zeta potential. The removal of the textile dye was investigated by using the batch adsorption method, investigating the effect of pH, dye concentration, adsorbent dose, contact time, and temperature. The results revealed that the maximum removal efficiency of 102.2 mg/L of the dye is about 99.67% under pH 6.0, the optimal contact time is 5 min, and the adsorbent dosage is 0.5 g/L. At 29°C; the adsorption capacity increased from 81.29 to 332.60 mg/g when the initial concentration of the dye was increased from 40.97 to 212.20 mg/L. Adsorption kinetics fitted well with the pseudo-second-order model with a good correlation (R ² = 0.9998). The Langmuir isotherm model can best describe the adsorption isotherm model. Based on the experimental results, the CM-βCD:nChi:Glu terpolymer has a promising potential as an efficient novel adsorbent for the removal of textile dye acid red 37 from contaminated water. This study's preparation techniques and demonstrated mechanisms offer valuable insights into the adsorbent-adsorbate interactions mechanism, analysis, challenges, and future directions of beta-cyclodextrin/chitosan-based adsorbents in wastewater treatment.