Investigating the Performance of a Zinc Oxide Impregnated Polyvinyl Alcohol-Based Low-Cost Cation Exchange Membrane in Microbial Fuel Cells

Investigating the Sulfonated Chitosan/Polyvinylidene Fluoride-Based Proton Exchange Membrane with fSiO2 as Filler in Microbial Fuel Cells

Chitosan (CS), a promising potential biopolymer with exquisite biocompatibility, economic viability, hydrophilicity, and chemical modifications, has drawn interest as an alternative material for proton exchange membrane (PEM) fabrication. However, CS in its original form exhibited low proton conductivity and mechanical stability, restricting its usage in PEM development. In this work, chitosan was functionalized (sulfonic acid (-SO3H) groups)) to enhance proton conductivity. The sulfonated chitosan (sCS) was blended with polyvinylidene fluoride (PVDF) polymer, along with the incorporation of functionalized SiO2 (-OH groups), for fabricating chitosan-based composite proton exchange membranes to enhance microbial fuel cell (MFC) performances. The results show that adding functionalized inorganic fillers (fSiO2) into the membrane enhances the mechanical, thermal, and anti-biofouling behavior. From the results, the PVDF/sCS/fSiO2 composite membrane exhibited enhanced proton conductivity 1.0644 × 10-2 S cm-1 at room temperature and increased IEC and mechanical and chemical stability. Furthermore, this study presents a revolutionary way to generate environmentally friendly natural polymer-based membrane materials for developing PEM candidates for enhanced MFC performances in generating bioelectricity and wastewater treatment.

Investigating the Performance of Lithium-Doped Bismuth Ferrite [BiFe1−xLixO3]-Graphene Nanocomposites as Cathode Catalyst for the Improved Power Output in Microbial Fuel Cells

In this study, multifunctional lithium-doped bismuth ferrite [BiFe1−xLixO3]-graphene nanocomposites (x = 0.00, 0.02, 0.04, 0.06) were synthesized by a sol-gel and ultrasonication assisted chemical reduction method. X-ray diffraction and FESEM electron microscopy techniques disclosed the nanocomposite phase and nanocrystalline nature of [BiFe1−xLixO3]-graphene nanocomposites. The FESEM images and the EDX elemental mapping revealed the characteristic integration of BiFe1−xLixO3 nanoparticles (with an average size of 95 nm) onto the 2D graphene layers. The Raman spectra of the [BiFe1−xLixO3]-graphene nanocomposites evidenced the BiFe1−xLixO3 and graphene nanostructures in the synthesized nanocomposites. The photocatalytic performances of the synthesized nanocomposites were assessed for ciprofloxacin (CIP) photooxidation under UV-visible light illumination. The photocatalytic efficiencies of [BiFe1−xLixO3]-graphene nanocomposites were measured to be 42%, 47%, 43%, and 10%, for x = 0.00, 0.02, 0.04, 0.06, respectively, within 120 min illumination, whereas the pure BiFeO3 nanoparticles were 21.0%. BiFe1−xLixO3 nanoparticles blended with graphene were explored as cathode material and tested in a microbial fuel cell (MFC). The linear sweep voltammetry (LSV) analysis showed that the high surface area of BiFeO3 was attributed to efficient oxygen reduction reaction (ORR) activity. The increasing loading rates of (0.5–2.5 mg/cm2) [BiFe1−xLixO3]-graphene composite on the cathode surface showed increasing power output, with 2.5 and 2 mg/cm2 achieving the maximum volumetric power density of 8.2 W/m3 and 8.1 W/m3, respectively. The electrochemical impedance spectroscopy (EIS) analysis showed that among the different loading rates used in this study, BiFeO3, with a loading rate of 2.5 mg/cm2, showed the lowest charge transfer resistance (Rct). The study results showed the potential of [BiFe1−xLixO3]-graphene composite as a cost-effective alternative for field-scale MFC applications.