Performance of Acacia Gum as a Novel Additive in Thin Film Composite Polyamide RO Membranes

Spatial variations and health risk assessment of heavy metal levels in groundwater of Qatar

The present work's objective is to give a comprehensive overview of the quality of groundwater in Qatar in terms of heavy metals content as well as investigating the cause and effect of the elevation in their levels above the WHO/US-EPA standards. The scope of the study included (1) physical and chemical analysis of 82 groundwater samples collected from various locations around Qatar, (2) development of ArcGIS maps depicting the variations in the levels, (3) assessment of the human health risks associated with the existing levels using three of the most used models which are: Hazard index (HI), Nemerow comprehensive pollution index (NCPI) and Incremental Lifetime Cancer Risk (ILCR). There is no extensive study ever reported to assess the health risks linked with the consumption of groundwater characterized with such heavy metals levels in Qatar. The chronic daily intake (CDI) of the investigated heavy metals (Ag, Mn, Cr, V, Mo and Sr) through ingestion and dermal pathways had a range of 1.4 × 10-5-6.7 × 10-1 mg/kg/day while the NCPI's range was reported at 0-4.39. Moreover, the HI and ILCR were found to have a range of 0-3.2 and 5.6 × 10-4-5.5 × 10-2, respectively. The assessment of health risks, conducted in the present work, could be beneficial in building the baseline of heavy metals levels in groundwater in Qatar. This will also help in the determination of any future contamination of groundwater.

Frontiers of Membrane Desalination Processes for Brackish Water Treatment: A Review

Climate change, population growth, and increased industrial activities are exacerbating freshwater scarcity and leading to increased interest in desalination of saline water. Brackish water is an attractive alternative to freshwater due to its low salinity and widespread availability in many water-scarce areas. However, partial or total desalination of brackish water is essential to reach the water quality requirements for a variety of applications. Selection of appropriate technology requires knowledge and understanding of the operational principles, capabilities, and limitations of the available desalination processes. Proper combination of feedwater technology improves the energy efficiency of desalination. In this article, we focus on pressure-driven and electro-driven membrane desalination processes. We review the principles, as well as challenges and recent improvements for reverse osmosis (RO), nanofiltration (NF), electrodialysis (ED), and membrane capacitive deionization (MCDI). RO is the dominant membrane process for large-scale desalination of brackish water with higher salinity, while ED and MCDI are energy-efficient for lower salinity ranges. Selective removal of multivalent components makes NF an excellent option for water softening. Brackish water desalination with membrane processes faces a series of challenges. Membrane fouling and scaling are the common issues associated with these processes, resulting in a reduction in their water recovery and energy efficiency. To overcome such adverse effects, many efforts have been dedicated toward development of pre-treatment steps, surface modification of membranes, use of anti-scalant, and modification of operational conditions. However, the effectiveness of these approaches depends on the fouling propensity of the feed water. In addition to the fouling and scaling, each process may face other challenges depending on their state of development and maturity. This review provides recent advances in the material, architecture, and operation of these processes that can assist in the selection and design of technologies for particular applications. The active research directions to improve the performance of these processes are also identified. The review shows that technologies that are tunable and particularly efficient for partial desalination such as ED and MCDI are increasingly competitive with traditional RO processes. Development of cost-effective ion exchange membranes with high chemical and mechanical stability can further improve the economy of desalination with electro-membrane processes and advance their future applications.

Metal ferrite incorporated polysulfone thin-film nanocomposite membranes for wastewater treatment

Effluents from food, fermentation, and sugar industries contain a large quantity of glucose which has to be removed to limit the chemical oxygen demand (COD) of the water discharged. This work proposes novel thin-film nanocomposite (TFN) membranes incorporated with MgFe₂O₄ and ZnFe₂O₄ nanoparticles to address this concern. The nanoparticles synthesized by the sol-gel method was extensively characterized and then incorporated into the active polyamide layer of the thin-film composite polysulfone membranes. The change in membrane morphology, wettability, chemical structure, and mechanical strength with the incorporation of nanoparticles was studied in detail. Membranes with 0.005 wt.% MgFe₂O₄ nanoparticle exhibited highest glucose rejection (96.52 ± 2.35%) at 10 bar, 25 °C, and sufficiently high pure water flux (50.54 ± 1.92 L/m²h). This membrane also displayed 69.1 ± 5.12% salt rejection when challenged with 2000 ppm synthetic NaCl solution.