In-Vitro Degradation of Hollow Silica Reinforced Magnesium Syntactic Foams in Different Simulated Body Fluids for Biomedical Applications

Advancement in biological and mechanical behavior of 3D printed poly lactic acid bone plates using polydopamine coating: Innovation for healthcare

The metallic biomaterials have been proclaimed to exhibit stress shielding with discharge of toxic ions, leading to polymeric implants attracting interest in 3D Printing domain. In this study, Poly Lactic Acid based 336 bone plates are fabricated using Fused Filament Fabrication with printing parameters being varied. Polydopamine, being biocompatible, is deposited on fabricated bone plates at varying submersion time, shaker speed and coating solutions concentration. The study involves witnessing the effect of printing and coating parameters on biological behavior of bone plates upon preservation in Simulated Body Fluid and Hank's Balanced Salt Solution. The findings propose the close relation of degradation with apatite growth. The highest degradation rate with significant reduction in mechanical characteristics are shown by uncoated bone plates. These bone plates have porous structure at 20% infill density, 0.5 mm layer height, 0.4 mm wall thickness and 100 mm/s print speed which could result in complete degradation with partial healing of bone fracture. The study suggests the preservation of bone plates coated at 120 h' submersion time and 120 RPM shaker speed in 3 mg/ml concentrated solution which showed lower apatite formation. Thus, the coating would slow down degradation of PLA bone plates, resulting in complete healing of bone fracture.

Sustainable Machining of Mg-9Al-1.4Zn Foam Used for Temporary Biomedical Implant Using Cryogenic Cooling

In this study, the drilling performance of biodegradable grade Mg-9Al-1.4Zn alloy reinforced with hollow thin-walled Al₂O₃ microspheres is inspected under different coolant environments such as dry, Almag^® mineral oil, and liquid nitrogen. Drilling experiments were carried out using titanium aluminum nitride PVD coated and uncoated K10 tools on varying volume fractions of magnesium syntactic foams (5%, 10%, and 15%) reinforced with hollow Al₂O₃ microspheres. Test results showed a 30-60% higher thrust force generated with liquid nitrogen drilling in comparison to dry and oil-based drilling while cutting higher volume fraction foams. Higher microsphere volume fractions of syntactic foam recorded higher machining forces, which is roughly a 200% increase as the volume fraction raised to 15%. The performance of TiAlN PVD tool coating is reflected through a reduction in thrust forces by 20% during cryogenic drilling. Scanning electron microscope (SEM) investigation of cryogenic-machined bore surfaces showed minimal drilling-induced surface defects compared to dry and Almag^® mineral oil conditions. A three-dimensional, thermo-mechanical finite element-based model for drilling Mg-9Al-1.4Zn syntactic foam using AdvantEdge^TM is developed for different sustainable lubrication conditions. Surface finish (Ra) showed a 45-55% improvement during cryogenic drilling of 15% syntactic foams with minimized subsurface damages compared to dry and wet cutting conditions. The higher the volume fraction, the higher the surface roughness (Ra) and thrust force under cryogenic machining.

In Vitro Electrochemical Corrosion Assessment of Magnesium Nanocomposites Reinforced with Samarium(III) Oxide and Silicon Dioxide Nanoparticles

Recent research on biodegradable magnesium-based implants has been focusing on increasing their mechanical strength and controlling their corrosion rate. One promising approach to significantly improve the mechanical properties of magnesium is the addition of nanoparticles to the magnesium matrix. However, there is limited research on the corrosion behavior of these new magnesium nanocomposites. In this study, the electrochemical corrosion characteristics of this new class of biomaterials are investigated. Two magnesium nanocomposites reinforced with nanoparticles (0.5, 1.0, and 1.5 Vol%) of samarium oxide (Sm2O3), and silicon dioxide (SiO2), were fabricated and tested. Corrosion behavior was assessed in comparison with high-purity magnesium samples as the control group. The addition of the nanoparticles to the magnesium matrix strengthened the materials, which was represented in an increase in the microhardness. However, the fabricated nanocomposite samples exhibited a slightly reduced corrosion resistance compared to the high-purity magnesium control due to the differences in the purity level and fabrication methods. Both nanocomposites showed the highest corrosion resistance, represented in the slowest corrosion rates, at the 1.0 Vol% content. Hence, the developed nanocomposites are still promising candidates as biodegradable materials for bone-fixation application owing to their superior mechanical properties and acceptable corrosion characteristics.

Tensile Behavior and Performance of Syntactic Steel Foams Prepared by Infiltration Casting

Syntactic steel foams (SSFs) were prepared by low-pressure infiltration of molten ASTM CF-8 cast austenitic stainless steel into randomly and densely packed Al2O3 hollow spheres. The microstructure of the SSFs was characterized by scanning electron microscopy and energy dispersive spectrometry. Using dumbbell-shaped specimens, the density of the as-cast SSFs is measured in the range from 3.33 to 3.64 g/cm3 and their ultimate tensile strength from 83.1 to 97.6 MPa. No significant chemical reaction was detected between the fillers and matrix. The quasi-static uniaxial tensile deformation of the syntactic foams underwent elastic deformation, plastic deformation, and then a failure stage, showing similar tensile behavior to plastic bulk metals but different behavior to common metal foams. From the good ductility of the metal matrix, a clear macroscopic plastic deformation was observed before the ductile fracture of the syntactic foams. A constitutive relationship of the SSFs under uniaxial tensile loads has been proposed.

Biodegradable Magnesium Biomaterials—Road to the Clinic

In recent decades, we have witnessed radical changes in the use of permanent biomaterials. The intrinsic ability of magnesium (Mg) and its alloys to degrade without releasing toxic degradation products has led to a vast range of applications in the biomedical field, including cardiovascular stents, musculoskeletal, and orthopedic applications. With the use of biodegradable Mg biomaterials, patients would not suffer second surgery and surgical pain anymore. Be that as it may, the main drawbacks of these biomaterials are the high corrosion rate and unexpected degradation in physiological environments. Since biodegradable Mg-based implants are expected to show controllable degradation and match the requirements of specific applications, various techniques, such as designing a magnesium alloy and modifying the surface characteristics, are employed to tailor the degradation rate. In this paper, some fundamentals and particular aspects of magnesium degradation in physiological environments are summarized, and approaches to control the degradation behavior of Mg-based biomaterials are presented.