Investigation of Centrifugal Fractionation with Time-Dependent Process Parameters as a New Approach Contributing to the Direct Recycling of Lithium-Ion Battery Components

Synthesis and Electrochemical Properties of TiNb2O7 and Ti2Nb10O29 Anodes under Various Annealing Atmospheres

In this study, two compounds of TiNb2O7 and Ti2Nb10O29 were successfully synthesized by mechanochemical method and post-annealing as an anode material for lithium-ion batteries. The effect of annealing atmosphere on the morphology, particle size, and electrochemical characteristics of two compounds was investigated. For these purposes, the reactive materials were milled under an argon atmosphere with a certain mole ratio. Subsequently, each sample was subjected to annealing treatment in two different atmospheres, namely argon and oxygen. Phase and morphology identifications were carried out by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) to identify the phases and evaluate the morphology of the synthesized samples. The charging and discharging tests were conducted using a battery-analyzing device to evaluate the electrochemical properties of the fabricated anodes. Annealing in different atmospheres resulted in variable discharge capacities so that the two compounds of TiNb2O7 and Ti2Nb10O29 annealed under the argon atmosphere showed a capacity of 60 and 66 mAh/g after 179 cycles, respectively, which had a lower capacity than their counterpart under the oxygen atmosphere. The final capacity of the annealed samples in the oxygen atmosphere is 72 and 74 mAh/g, respectively.

Soft Sensor Development for Real-Time Process Monitoring of Multidimensional Fractionation in Tubular Centrifuges

High centrifugal acceleration and throughput rates of tubular centrifuges enable the solid-liquid size separation and fractionation of nanoparticles on a bench scale. Nowadays, advantageous product properties are defined by precise specifications regarding particle size and material composition. Hence, there is a demand for innovative and efficient downstream processing of complex particle suspensions. With this type of centrifuge working in a semi-continuous mode, an online observation of the separation quality is needed for optimization purposes. To analyze the composition of fines downstream of the centrifuge, a UV/vis soft sensor is developed to monitor the sorting of polymer and metal oxide nanoparticles by their size and density. By spectroscopic multi-component analysis, a measured UV/vis signal is translated into a model based prediction of the relative solids volume fraction of the fines. High signal stability and an adaptive but mandatory calibration routine enable the presented setup to accurately predict the product's composition at variable operating conditions. It is outlined how this software-based UV/vis sensor can be utilized effectively for challenging real-time process analytics in multi-component suspension processing. The setup provides insight into the underlying process dynamics and assists in optimizing the outcome of separation tasks on the nanoscale.