Utilisation of Mining Waste from the Steel Industry, Ladle Furnace Slags, as a Filler in Bituminous Mixtures of Continuous Grading

An experimental investigation on utilization of ladle refined furnace (LRF) slag in stabilizing clayey soil

The contemporaneous world of development and urbanization generates extreme stresses on building infrastructures, and the use of soil as a load-bearing material is a prerequisite for such activity. However, if the foundation soil lacks enough bearing capacity and shear strength and shows excessive settlements, unescapable failures will occur in constructed infrastructures. As such, improvement or stabilization of soft clay soil is crucial before initiating any construction project to limit the potentiality of post-construction faults and damages. In this research, the efficiency of ladle refined furnace (LRF) slag has been investigated to stabilize the geotechnical properties of poor conditioned-soft clayey soil, which will also lessen the environmental degradation due to the unplanned dumping of LRF slag. Various experimental programs such as the Atterberg limit, consolidation, compaction, unconfined compressive strength, and California Bearing Ratio tests were carried out in this study. Experimental results revealed that adding LRF slag in different percentages augmented the strength and dry density of the original soil to a considerable extent, and the optimum percentage of LRF slag was 20%. 20% LRF content in the soil increased the UCS value of the soil by 219%, CBR value by 47%, and reduced consolidation settlement by 30%. Additionally, the test results were further evaluated by the SEM-EDS test.