Recovery of Vanadium (V) Oxyanions by a Magnetic Macroporous Copolymer Nanocomposite Sorbent

Speciation of Hexavalent Chromium in Aqueous Solutions Using a Magnetic Silica-Coated Amino-Modified Glycidyl Methacrylate Polymer Nanocomposite

A new magnetic amino-functionalized polymeric sorbent based on glycidyl methacrylate was synthesized and used in the separation of chromium Cr(VI) oxyanions sorption from aqueous solutions in a static batch system. The kinetic and isothermal parameters of the sorption process were determined. The experimental data were best fitted by a pseudo-second-order model with R² = 0.994 and χ² = 0.004. The sorption process of Cr(VI) removal by amino-functionalized sorbent was controlled by both intraparticle diffusion and liquid film diffusion. The equilibrium results showed that the sorption process is best described by the Freundlich model, followed closely by the Sips isotherm model, with a maximum sorption capacity of 64 mg/g. Quantum chemical modeling revealed that the sorption sites on the sorbent surface are fragments with diethylenetriamine and aminopropyl silane groups that coated the magnetic nanoparticles. The calculations showed that Cr(VI) oxyanions (Cr₂O₇^2-, CrO₄^2- and HCrO₄^-) bind to both sorption sites, with diethylenetriamine centers slightly favored. The X-ray photoelectron spectroscopy (XPS) spectra demonstrate that the chromium bound to the sorbent in the form of Cr(III), indicating that the Cr(VI) can be converted on the surface of the sorbent to a less harmful form Cr(III) due to the sorbent's chemical composition.

A Core-Shell Amino-Functionalized Magnetic Molecularly Imprinted Polymer Based on Glycidyl Methacrylate for Dispersive Solid-Phase Microextraction of Aniline

A core-shell amino-functionalized glycidyl methacrylate magnetic molecularly imprinted polymer (MIP) was synthesized by the suspension polymerization/surface imprinting method and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), mercury porosimetry, nitrogen gas adsorption–desorption, and elemental analysis. This MIP was used as the sorbent in dispersive solid-phase microextraction (DSPME) of aniline from textile wastewater prior to high-performance liquid chromatography-mass spectrometry (HPLC-MS) measurements. Since aniline is toxic and a probable human carcinogen, its determination in water is of great significance. This is a challenging task because aniline is usually present at trace levels. The effects of different DSPME variables on the preconcentration efficiency have been studied by using the Plackett–Burman screening design of experiments (DoE) followed by response surface methodology optimization using the Box-Behnken design. Thus, DoE enabled the investigation of several variables simultaneously. Under optimized conditions, aniline was effectively and selectively separated by a small amount of the DSPME sorbent and detected in real textile wastewater samples. The method detection limit of 1 ng mL−1 was attained, with good method linearity and acceptable recovery and precision. The results showed that the studied MIP could be a reliable DSPME sorbent for efficiently analyzing trace aniline in real wastewater samples.

Methacrylate-Based Polymeric Sorbents for Recovery of Metals from Aqueous Solutions

The industrialization and urbanization expansion have increased the demand for precious and rare earth elements (REEs). In addition, environmental concerns regarding the toxic effects of heavy metals on living organisms imposed an urgent need for efficient methods for their removal from wastewaters and aqueous solutions. The most efficient technique for metal ions removal from wastewaters is adsorption due to its reversibility and high efficiency. Numerous adsorbents were mentioned as possible metal ions adsorbents in the literature. Chelating polymer ligands (CPLs) with adaptable surface chemistry, high affinity towards targeted metal ions, high capacity, fast kinetics, chemically stable, and reusable are especially attractive. This review is focused on methacrylate-based magnetic and non-magnetic porous sorbents. Special attention was devoted to amino-modified glycidyl methacrylate (GMA) copolymers. Main adsorption parameters, kinetic models, adsorption isotherms, thermodynamics of the adsorption process, as well as regeneration of the polymeric sorbents were discussed.

Dispersive Solid–Liquid Microextraction Based on the Poly(HDDA)/Graphene Sorbent Followed by ICP-MS for the Determination of Rare Earth Elements in Coal Fly Ash Leachate

A dispersive solid-phase microextraction (DSPME) sorbent consisting of poly(1,6-hexanediol diacrylate)-based polymer microspheres, with embedded graphene microparticles (poly(HDDA)/graphene), was synthesized by microfluidic emulsification/photopolymerization and characterized by optical microscopy and X-ray fluorescence spectrometry. This sorbent was applied for simple, fast, and sensitive vortex-assisted DSPME of rare earth elements (RREs) in coal fly ash (CFA) leachate, prior to their quantification by inductively coupled plasma mass spectrometry (ICP-MS). Among nine DSPME variables, the Plackett–Burman screening design (PBD), followed by the central composite optimization design (CCD) using the Derringer desirability function (D), identified the eluent type as the most influencing DSPME variable. The optimum conditions with maximum D (0.65) for the chelating agent di-(2-ethylhexyl) phosphoric acid (D2EHPA) amount, the sorbent amount, the eluting solvent, the extraction temperature, the centrifuge speed, the vortexing time, the elution time, the centrifugation time, and pH, were set to 60 μL, 30 mg, 2 M HNO3, 25 °C, 6000 rpm, 1 min, 1 min, 5 min, and 4.2, respectively. Analytical validation of the DSPME method for 16 REEs (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) in CFA leachate samples estimated the detection limits at the low ppt level, the recovery range 43–112%, and relative standard deviation within ± 22%. This method was applied to a water extraction procedure (EP) and acetic acid toxicity characteristic leaching procedure (TCLP) for leachate of CFA, from five different coal-fired thermoelectric power plants. The most abundant REEs in leachate (20 ÷ 1 solid-to-liquid ratio) are Ce, Y, and La, which were found in the range of 22–194 ng/L, 35–105 ng/L, 48–95 ng/L, and 9.6–51 μg/L, 7.3–22 μg/L, 2.4–17 μg/L, for EP and TCLP leachate, respectively. The least present REE in TCLP leachate was Lu (42–125 ng/L), which was not detected in EP leachate.