Conductance Quantization Behavior in Pt/SiN/TaN RRAM Device for Multilevel Cell

Artificial Synapse Emulated by Indium Tin Oxide/SiN/TaN Resistive Switching Device for Neuromorphic System

In this paper, we fabricate an ITO/SiN/TaN memristor device and analyze its electrical characteristics for a neuromorphic system. The device structure and chemical properties are investigated using transmission electron microscopy and X-ray photoelectron spectroscopy. Uniform bipolar switching is achieved through DC sweep under a compliance current of 5 mA. Also, the analog reset phenomenon is observed by modulating the reset voltage for long-term memory. Additionally, short-term memory characteristics are obtained by controlling the strength of the pulse response. Finally, bio-inspired synaptic characteristics are emulated using Hebbian learning rules such as spike-rate-dependent plasticity (SRDP) and spike-timing-dependent plasticity (STDP). As a result, we believe that the coexistence of short-term and long-term memories in the ITO/SiN/TaN device can provide flexibility in device design in future neuromorphic applications.

Resistive Switching Characteristics of Alloyed AlSiOx Insulator for Neuromorphic Devices

Charge-based memories, such as NAND flash and dynamic random-access memory (DRAM), have reached scaling limits and various next-generation memories are being studied to overcome their issues. Resistive random-access memory (RRAM) has advantages in structural scalability and long retention characteristics, and thus has been studied as a next-generation memory application and neuromorphic system area. In this paper, AlSiO_x, which was used as an alloyed insulator, was used to secure stable switching. We demonstrate synaptic characteristics, as well as the basic resistive switching characteristics with multi-level cells (MLC) by applying the DC sweep and pulses. Conduction mechanism analysis for resistive switching characteristics was conducted to understand the resistive switching properties of the device. MLC, retention, and endurance are evaluated and potentiation/depression curves are mimicked for a neuromorphic device.

Multi-level Cells and Quantized Conductance Characteristics of Al2O3-Based RRAM Device for Neuromorphic System

Recently, various resistance-based memory devices are being studied to replace charge-based memory devices to satisfy high-performance memory requirements. Resistance random access memory (RRAM) shows superior performances such as fast switching speed, structural scalability, and long retention. This work presented the different filament control by the DC voltages and verified its characteristics as a synaptic device by pulse measurement. Firstly, two current-voltage (I-V) curves are characterized by controlling a range of DC voltages. The retention and endurance for each different I-V curve were measured to prove the reliability of the RRAM device. The detailed voltage manipulation confirmed the characteristics of multi-level cell (MLC) and conductance quantization. Lastly, synaptic functions such as potentiation and depression, paired-pulse depression, excitatory post-synaptic current, and spike-timing-dependent plasticity were verified. Collectively, we concluded that Pt/Al₂O₃/TaN is appropriate for the neuromorphic device.

Resistive Switching and Synaptic Characteristics in ZnO/TaON-Based RRAM for Neuromorphic System

We fabricated an ITO/ZnO/TaON/TaN device as nonvolatile memory (NVM) with resistive switching for complementary metal-oxide-semiconductor (CMOS) compatibility. It is appropriate for the age of big data, which demands high speed and capacity. We produced a TaON layer by depositing a ZnO layer on a TaN layer using an oxygen-reactive radio frequency (RF) sputtering system. The bi-layer formation of ZnO and TaON interferes with the filament rupture after the forming process and then raises the current level slightly. The current levels were divided into high- and low-compliance modes. The retention, endurance, and pulse conductance were verified with a neuromorphic device. This device was stable and less consumed when it was in low mode rather than high mode.

Robust Resistive Switching Constancy and Quantum Conductance in High-k Dielectric-Based Memristor for Neuromorphic Engineering

For neuromorphic computing and high-density data storage memory, memristive devices have recently gained a lot of interest. So far, memristive devices have suffered from switching parameter instability, such as distortions in resistance values of low- and high-resistance states (LRSs and HRSs), dispersion in working voltage (set and reset voltages), and a small ratio of high and low resistance, among other issues. In this context, interface engineering is a critical technique for addressing the variation issues that obstruct the use of memristive devices. Herein, we engineered a high band gap, low Gibbs free energy Al₂O₃ interlayer between the HfO₂ switching layer and the tantalum oxy-nitride electrode (TaN) bottom electrode to operate as an oxygen reservoir, increasing the resistance ratio between HRS and LRS and enabling multilayer data storage. The Pt/HfO₂/Al₂O₃/TaN memristive device demonstrates analog bipolar resistive switching behavior with a potential ratio of HRS and LRS of > 10⁵ and the ability to store multi-level data with consistent retention and uniformity. On set and reset voltages, statistical analysis is used; the mean values (µ) of set and reset voltages are determined to be - 2.7 V and + 1.9 V, respectively. There is a repeatable durability over DC 1000 cycles, 10⁵ AC cycles, and a retention time of 10⁴ s at room temperature. Quantum conductance was obtained by increasing the reset voltage with step of 0.005 V with delay time of 0.1 s. Memristive device has also displayed synaptic properties like as potentiation/depression and paired-pulse facilitation (PPF). Results show that engineering of interlayer is an effective approach to improve the uniformity, ratio of high and low resistance, and multiple conductance quantization states and paves the way for research into neuromorphic synapses.