Effects of Cold Swaging on Mechanical Properties and Magnetic Susceptibility of the Zr–1Mo Alloy

Structural Phenomena Introduced by Rotary Swaging: A Review

Rotary swaging is an industrially applicable intensive plastic deformation method. Due to its versatility, it is popular, especially in the automotive industry. Similar to the well-known methods of severe plastic deformation (SPD), rotary swaging imparts high shear strain into the swaged materials and thus introduces grain refinement down to a very fine, even ultra-fine, level. However, contrary to SPD methods, one of the primary characteristics of which is that they retain the shapes and dimensions of the processed sample, rotary swaging enables the imparting of required shapes and dimensions of workpieces (besides introducing structure refinement and the consequent enhancement of properties and performance). Therefore, under optimized conditions, swaging can be used to process workpieces of virtually any metallic material with theoretically any required dimensions. The main aim of this review is to present the principle of the rotary swaging method and its undeniable advantages. The focus is primarily on assessing its pros and cons by evaluating the imparted microstructures.

Evaluation of cytocompatibility and osteoconductivity of Zr-14Nb-5Ta-1Mo alloy with MC3T3-E1 cells

The cytocompatibility and osteoconductivity of the Zr-14Nb-5Ta-1Mo alloy were investigated using a mouse osteoblastic cell line (MC3T3-E1) to promote the application of this newly developed alloy in dental/medical treatment. The initial cell-attached morphology was visualized by fluorescent staining, and cells cultured on the Zr alloy showed similar cell adhesion behavior to cells cultured on titanium (Ti). In our 5-day proliferation investigation, similar cell numbers were obtained with both Zr alloy and Ti. These results indicate that the cytocompatibility of Zr alloy is similar to that of Ti. In addition, the similar results in the evaluation of alkaline phosphatase (ALP) activity and staining of deposited calcium using alizarin red S with both Zr alloy and Ti indicated that the osteoconductivity of the Zr alloy is similar to that of Ti. Our results prove the good cytocompatibility and osteoconductivity of the Zr-14Nb-5Ta-1Mo alloy, enabling its promotion for use in dental/medical applications.

Effects of process parameters on the mechanical properties of additively manufactured Zr-1Mo alloy builds

In order to solve the artifact problem in magnetic resonance images, a low magnetic Zr-1Mo(wt%) alloy with high mechanical performance was successfully fabricated by laser powder bed fusion (L-PBF) using gas-atomized Zr-1Mo alloy powder. The as-built Zr-1Mo alloy showed superior strength and elongation compared to the as-cast Zr-1Mo alloy due to grain refinement and the inexistence of large casting defects. The microstructure of L-PBF-processed Zr-1Mo alloy builds was not sensitive to process parameters. On the other hand, morphology and distribution of defects, interstitials concentration, and crystallographic orientation comprehensively influenced the mechanical properties of the builds. Increasing interstitials concentration caused by increasing energy density render to increasing strength. Large pores caused by balling effect lead to a severe decrease of both strength and ductility of builds using high energy density (over 70.3 J·mm^-3) and high scanning speed (1050/1200 mm·s^-1). On the contrary, spherical pores possessing several microns in size has much less effect on mechanical properties than the large-size pores. There are two kinds of texture({1 1 0}_α texture and {1 1 0}_α+{1 0 2}_α bi-texture) were confirmed in this study. {1 1 0}_α texture contributed to the slight increase of elongation with increasing energy density in low scanning speed case (600/750 mm·s^-1) and the superior elongation of low scanning speed specimens compare to that of high scanning speed specimens in medium energy density range (about 48 J·mm^-3). From the viewpoints of the ultimate tensile strength(UTS) and elongation, it was found that an energy density of 84.4 mm·s^-1 with a scanning speed of 600 mm·s^-1 is preferable for the L-PBF-processed Zr-1Mo alloy in this study. These experimental results may provide direct guidelines regarding the applicability of Zr-1Mo alloy fabricated by L-PBF for biomedical applications.

Appraising the potential of Zr-based biomedical alloys to reduce magnetic resonance imaging artifacts

This study compared Zr-Mo alloys with commercial metallic biomaterials. It was observed that the Zr-Mo alloys exhibited favourable mechanical properties, particularly the Zr-10Mo alloy, which showed the highest strength to Young's modulus ratio among all evaluated metals. These alloys also exhibited the lowest magnetic susceptibilities, which are important for magnetic resonance imaging (MRI). However, both Zr- and Ti-based metals yielded comparable artifacts. It was concluded that the magnetic susceptibility must differ considerably to afford significantly improved MRI quality owing to the increased importance of non-susceptibility-related artifacts when comparing materials with relatively similar magnetic susceptibilities.

Improvement and Application of Zirconium Alloys

n/a