Heat Transport of Electrokinetic Flow in Slit Soft Nanochannels

Thermal and Flow Analysis of Fully Developed Electroosmotic Flow in Parallel-Plate Micro- and Nanochannels with Surface Charge-Dependent Slip

This study analytically investigates the coupled effects of surface charge and boundary slip on the fully developed electroosmotic flow and thermal transfer in parallel plate micro and nanochannels under the high zeta potential. The electric potential, velocity, temperature, flow rate, and Nusselt number are obtained analytically. The main results are that the velocity of bulk flow is significantly reduced in the presence of the surface charge-dependent slip. Moreover, the maximum velocity at ζ = -125 mV is approximately twice as large as that at ζ = -25 mV. The velocity and dimensionless temperature increase as the zeta potential increases. The dimensionless temperature of the surface charge-dependent slip flow is larger than that of the surface charge-independent slip flow. For the surface charge-dependent slip flow, the maximum temperature at ζ = -125 mV is approximately four times larger than that at ζ = -25 mV. The Nusselt number decreases with Joule heating and increases with a positive heat transfer coefficient. The Nusselt number decreases as the electric field and the magnitude of the zeta potential increase. In the surface charge-dependent slip flows, the Nusselt number is smaller than that in the surface charge-independent slip flows.

Space Electroosmotic Thrusters in Ion Partitioning Soft Nanochannels

Space electroosmotic thrusters (EOTs) are theoretically investigated in a soft charged nanochannel with a dense polyelectrolyte layer (PEL), which is considered to be more realistic than a low-density PEL. When the PEL is dense, its permittivity is smaller than the one of the electrolyte solution layer, leading to rearrangement of ions in the channel, which is denoted as the ion partitioning effect. It is noted that fluid viscosity becomes high within the PEL owing to the hydration effect. An analytical solution for electroosmotic velocity through the channel is obtained by utilizing the Debye-Hückel linearization assumption. Based on the fluid motion, thruster performances, including thrust, specific impulse, thrust-to-power ratio, and efficiency, are calculated. The ion partitioning effect leads to enhancement of the thruster velocity, while increase of the dynamic viscosity inside the PEL reduces the flow rate of the fluid. Therefore, these performances are further impacted by the dense soft material, which are discussed in detail. Moreover, changes or improvements of the thruster performances from the dense PEL to the weak PEL are presented and compared, and distributions of various energy items are also provided in this study. There is a good result whereby the increase in electric double layer thickness promotes the development of thruster performances. Ultimately, the simulated EOTs produce thrust of about 0 to 20 μN and achieve thruster efficiency of 90.40%, while maintaining an appropriate thrust-power ratio of about 1.53 mN/W by optimizing all design parameters.

Textile-Based Triboelectric Nanogenerators for Wearable Self-Powered Microsystems

In recent years, wearable electronic devices have made considerable progress thanks to the rapid development of the Internet of Things. However, even though some of them have preliminarily achieved miniaturization and wearability, the drawbacks of frequent charging and physical rigidity of conventional lithium batteries, which are currently the most commonly used power source of wearable electronic devices, have become technical bottlenecks that need to be broken through urgently. In order to address the above challenges, the technology based on triboelectric effect, i.e., triboelectric nanogenerator (TENG), is proposed to harvest energy from ambient environment and considered as one of the most promising methods to integrate with functional electronic devices to form wearable self-powered microsystems. Benefited from excellent flexibility, high output performance, no materials limitation, and a quantitative relationship between environmental stimulation inputs and corresponding electrical outputs, TENGs present great advantages in wearable energy harvesting, active sensing, and driving actuators. Furthermore, combined with the superiorities of TENGs and fabrics, textile-based TENGs (T-TENGs) possess remarkable breathability and better non-planar surface adaptability, which are more conducive to the integrated wearable electronic devices and attract considerable attention. Herein, for the purpose of advancing the development of wearable electronic devices, this article reviews the recent development in materials for the construction of T-TENGs and methods for the enhancement of electrical output performance. More importantly, this article mainly focuses on the recent representative work, in which T-TENGs-based active sensors, T-TENGs-based self-driven actuators, and T-TENGs-based self-powered microsystems are studied. In addition, this paper summarizes the critical challenges and future opportunities of T-TENG-based wearable integrated microsystems.