Numerical Study and Optimization of a Novel Piezoelectric Transducer for a Round-Window Stimulating Type Middle-Ear Implant

Design Study of a Round Window Piezoelectric Transducer for Active Middle Ear Implants

This report describes the design of a new piezoelectric transducer for round window (RW)-driven middle ear implants. The transducer consists of a piezoelectric element, gold-coated copper bellows, silicone elastomer (polydimethylsiloxane, PDMS), metal cylinder (tungsten), and titanium housing. The piezoelectric element is fixed to the titanium housing and mechanical resonance is generated by the interaction of the bellows, PDMS, and tungsten cylinder. The dimensions of PDMS and the tungsten cylinder with output characteristics suitable for compensation of sensorineural hearing loss were derived by mechanical vibrational analysis (equivalent mechanical model and finite element analysis (FEA)). Based on the results of FEA, the RW piezoelectric transducer was implemented, and bench tests were performed under no-load conditions to confirm the output characteristics. The transducer generates an average displacement of 219.6 nm in the flat band (0.1–1 kHz); the resonance frequency is 2.3 kHz. To evaluate the output characteristics, the response was compared to that of an earlier transducer. When driven by the same voltage (6 V_p), the flat band displacement averaged 30 nm larger than that of the other transducer, and no anti-resonance was noted. Therefore, we expect that the new transducer can serve as an output device for hearing aids, and that it will improve speech recognition and treat high-frequency sensorineural hearing loss more effectively.

Research on coupling effects of actuator and round window membrane on reverse stimulation of human cochlea

An active actuator of a middle-ear implant coupled to the round window membrane (RWM), which transmits vibration to the cochlea, has been used to compensate for hearing loss in patients. However, various factors affect the coupling condition between the actuator and the RWM, resulting in coupling leakage. In this study, a coupling impedance model of the human ear and the actuator was used to investigate the effect of inefficient coupling during reverse stimulation. First, the three-port circuit network model of the actuator was coupled with the acoustic impedance model of human ear reverse sound transmission. Meanwhile, the inefficient coupling impedance was estimated. Then, the effect of the actuator's coupling on reverse stimulation was studied by comparing the reverse pressure transfer function. Furthermore, the inefficient coupling's influence in the ear with middle-ear disorder was also investigated by simulating two typical forms of middle-ear disorder: otosclerosis and ossicular chain disarticulation. The results show that the change of the inefficient coupling impedance plays a significant role during reverse stimulation. Inefficient coupling of the actuator and the RWM deteriorates the cochlear response of reverse stimulation over the entire frequency range. Additionally, the coupling effect of the actuator does not change the influence tendency of middle-ear disorder on reverse stimulation's performance, but changes the response amplitude of the reverse stimulation.

The Influence of Piezoelectric Transducer Stimulating Sites on the Performance of Implantable Middle Ear Hearing Devices: A Numerical Analysis

To overcome the inherent deficiencies of hearing aids, implantable middle ear hearing devices (IMEHDs) have emerged as a new treatment for hearing loss. However, clinical results show that the IMEHD performance varies with its transducer’s stimulating site. To numerically analyze the influence of the piezoelectric transducer’s stimulating sites on its hearing compensation performance, we constructed a human ear finite element model and confirmed its validity. Based on this finite element model, the displacement stimulation, which simulates the piezoelectric transducer’s stimulation, was applied to the umbo, the incus long process, the incus body, the stapes, and the round window membrane, respectively. Then, the stimulating site’s effect of the piezoelectric transducer was analyzed by comparing the corresponding displacements of the basilar membrane. Besides, the stimulating site’s sensitivity to the direction of excitation was also studied. The result of the finite element analysis shows that stimulating the incus body is least efficient for the piezoelectric transducer. Meanwhile, stimulating the round window membrane or the stapes generates a higher basilar membrane displacement than stimulating the eardrum or the incus long process. However, the performance of these two ideal sites’ stimulation is sensitive to the changes in the excitation’s direction. Thus, the round window membrane and the stapes is the ideal stimulating sites for the piezoelectric transducer regarding the driving efficiency. The direction of the excitation should be guaranteed for these ideal sites.