Recent Advances in Printed Capacitive Sensors

1D/2D Heterostructures: Synthesis and Application in Photodetectors and Sensors

Two-dimensional (2D) semiconductor components have excellent physical attributes, such as excellent mechanical ductility, high mobility, low dielectric constant, and tunable bandgap, which have attracted much attention to the fields of flexible devices, optoelectronic conversion, and microelectronic devices. Additionally, one-dimensional (1D) semiconductor materials with unique physical attributes, such as high surface area and mechanical potency, show great potential in many applications. However, isolated 1D and 2D materials often do not meet the demand for multifunctionality. Therefore, more functionality is achieved by reconstructing new composite structures from 1D and 2D materials, and according to the current study, it has been demonstrated that hybrid dimensional integration yields a significant enhancement in performance and functionality, which is widely promising in the field of constructing novel electronic and optoelectronic nanodevices. In this review, we first briefly introduce the preparation methods of 1D materials, 2D materials, and 1D/2D heterostructures, as well as their advantages and limitations. The applications of 1D/2D heterostructures in photodetectors, gas sensors, pressure and strain sensors, as well as photoelectrical synapses and biosensors are then discussed, along with the opportunities and challenges of their current applications. Finally, the outlook of the emerging field of 1D/2D heterojunction structures is given.

A Novel Microfluidics Droplet-Based Interdigitated Ring-Shaped Electrode Sensor for Lab-on-a-Chip Applications

This paper presents a comprehensive study focusing on the detection and characterization of droplets with volumes in the nanoliter range. Leveraging the precise control of minute liquid volumes, we introduced a novel spectroscopic on-chip microsensor equipped with integrated microfluidic channels for droplet generation, characterization, and sensing simultaneously. The microsensor, designed with interdigitated ring-shaped electrodes (IRSE) and seamlessly integrated with microfluidic channels, offers enhanced capacitance and impedance signal amplitudes, reproducibility, and reliability in droplet analysis. We were able to make analyses of droplet length in the range of 1.0-6.0 mm, velocity of 0.66-2.51 mm/s, and volume of 1.07 nL-113.46 nL. Experimental results demonstrated that the microsensor's performance is great in terms of droplet size, velocity, and length, with a significant signal amplitude of capacitance and impedance and real-time detection capabilities, thereby highlighting its potential for facilitating microcapsule reactions and enabling on-site real-time detection for chemical and biosensor analyses on-chip. This droplet-based microfluidics platform has great potential to be directly employed to promote advances in biomedical research, pharmaceuticals, drug discovery, food engineering, flow chemistry, and cosmetics.

The Role of Interdigitated Electrodes in Printed and Flexible Electronics

Flexible electronics, also referred to as printable electronics, represent an interesting technology for implementing electronic circuits via depositing electronic devices onto flexible substrates, boosting their possible applications. Among all flexible electronics, interdigitated electrodes (IDEs) are currently being used for different sensor applications since they offer significant benefits beyond their functionality as capacitors, like the generation of high output voltage, fewer fabrication steps, convenience of application of sensitive coatings, material imaging capability and a potential of spectroscopy measurements via electrical excitation frequency variation. This review examines the role of IDEs in printed and flexible electronics since they are progressively being incorporated into a myriad of applications, envisaging that the growth pattern will continue in the next generations of flexible circuits to come.

Multi-Transduction-Mechanism Technology, an Emerging Approach to Enhance Sensor Performance

Conventional sensor systems employ single-transduction technology where they respond to an input stimulus and transduce the measured parameter into a readable output signal. As such, the technology can only provide limited corresponding data of the detected parameters due to relying on a single transformed output signal for information acquisition. This limitation commonly results in the need for utilizing sensor array technology to detect targeted parameters in complex environments. Multi-transduction-mechanism technology, on the other hand, may combine more than one transduction mechanism into a single structure. By employing this technology, sensors can be designed to simultaneously distinguish between different input signals from complex environments for greater degrees of freedom. This allows a multi-parameter response, which results in an increased range of detection and improved signal-to-noise ratio. In addition, utilizing a multi-transduction-mechanism approach can achieve miniaturization by reducing the number of required sensors in an array, providing further miniaturization and enhanced performance. This paper introduces the concept of multi-transduction-mechanism technology by exploring different candidate combinations of fundamental transduction mechanisms such as piezoresistive, piezoelectric, triboelectric, capacitive, and inductive mechanisms.

FBG-Based Sensitivity Structure Based on Flexure Hinge and Its Application for Pipeline Pressure Detection

With the widespread application of pipelines in engineering, more and more accidents occur because of pipeline leakage. Therefore, it is particularly important to continuously monitor the pipeline pressure. In this study, a non-intrusive and high-sensitivity structure based on FBG (Fiber Bragg grating) sensor is proposed. Firstly, the basic sensing theory of FBG and the state of a pipeline wall under inner pressure are analyzed. Then, structural sensitivity is deduced based on the flexure hinge and mechanical lever. Subsequently, finite element simulation for the whole sensitization structure is carried out, and optimal parameters are determined to obtain the maximum sensitivity. Finally, laboratory experiments are conducted to verify the function of the designed sensitivity structure. The experimental results show a good agreement with the simulation results. In the experiment, it can be found that the designed structure has a strain sensitivity of 9.59 pm/με, which is 11.51 times the pipeline surface strain. Besides, the structure is convenient to operate and has a good applied prospect for the engineering practice.

Transducer Technologies for Biosensors and Their Wearable Applications

The development of new biosensor technologies and their active use as wearable devices have offered mobility and flexibility to conventional western medicine and personal fitness tracking. In the development of biosensors, transducers stand out as the main elements converting the signals sourced from a biological event into a detectable output. Combined with the suitable bio-receptors and the miniaturization of readout electronics, the functionality and design of the transducers play a key role in the construction of wearable devices for personal health control. Ever-growing research and industrial interest in new transducer technologies for point-of-care (POC) and wearable bio-detection have gained tremendous acceleration by the pandemic-induced digital health transformation. In this article, we provide a comprehensive review of transducers for biosensors and their wearable applications that empower users for the active tracking of biomarkers and personal health parameters.

Tactile Sensing for Minimally Invasive Surgery: Conventional Methods and Potential Emerging Tactile Technologies

As opposed to open surgery procedures, minimally invasive surgery (MIS) utilizes small skin incisions to insert a camera and surgical instruments. MIS has numerous advantages such as reduced postoperative pain, shorter hospital stay, faster recovery time, and reduced learning curve for surgical trainees. MIS comprises surgical approaches, including laparoscopic surgery, endoscopic surgery, and robotic-assisted surgery. Despite the advantages that MIS provides to patients and surgeons, it remains limited by the lost sense of touch due to the indirect contact with tissues under operation, especially in robotic-assisted surgery. Surgeons, without haptic feedback, could unintentionally apply excessive forces that may cause tissue damage. Therefore, incorporating tactile sensation into MIS tools has become an interesting research topic. Designing, fabricating, and integrating force sensors onto different locations on the surgical tools are currently under development by several companies and research groups. In this context, electrical force sensing modality, including piezoelectric, resistive, and capacitive sensors, is the most conventionally considered approach to measure the grasping force, manipulation force, torque, and tissue compliance. For instance, piezoelectric sensors exhibit high sensitivity and accuracy, but the drawbacks of thermal sensitivity and the inability to detect static loads constrain their adoption in MIS tools. Optical-based tactile sensing is another conventional approach that facilitates electrically passive force sensing compatible with magnetic resonance imaging. Estimations of applied loadings are calculated from the induced changes in the intensity, wavelength, or phase of light transmitted through optical fibers. Nonetheless, new emerging technologies are also evoking a high potential of contributions to the field of smart surgical tools. The recent development of flexible, highly sensitive tactile microfluidic-based sensors has become an emerging field in tactile sensing, which contributed to wearable electronics and smart-skin applications. Another emerging technology is imaging-based tactile sensing that achieved superior multi-axial force measurements by implementing image sensors with high pixel densities and frame rates to track visual changes on a sensing surface. This article aims to review the literature on MIS tactile sensing technologies in terms of working principles, design requirements, and specifications. Moreover, this work highlights and discusses the promising potential of a few emerging technologies towards establishing low-cost, high-performance MIS force sensing.

Recent advances in techniques for fabrication and characterization of nanogap biosensors: A review

Nanogap biosensors have fascinated researchers due to their excellent electrical properties. Nanogap biosensors comprise three arrays of electrodes that form nanometer-size gaps. The sensing gaps have become the major building blocks of several sensing applications, including bio- and chemosensors. One of the advantages of nanogap biosensors is that they can be fabricated in nanoscale size for various downstream applications. Several studies have been conducted on nanogap biosensors, and nanogap biosensors exhibit potential material properties. The possibilities of combining these unique properties with a nanoscale-gapped device and electrical detection systems allow excellent and potential prospects in biomolecular detection. However, their fabrication is challenging as the gap is becoming smaller. It includes high-cost, low-yield, and surface phenomena to move a step closer to the routine fabrications. This review summarizes different feasible techniques in the fabrication of nanogap electrodes, such as preparation by self-assembly with both conventional and nonconventional approaches. This review also presents a comprehensive analysis of the fabrication, potential applications, history, and the current status of nanogap biosensors with a special focus on nanogap-mediated bio- and chemical sonsors.

A Review of Corrosion in Aircraft Structures and Graphene-Based Sensors for Advanced Corrosion Monitoring

Corrosion is an ever-present phenomena of material deterioration that affects all metal structures. Timely and accurate detection of corrosion is required for structural maintenance and effective management of structural components during their life cycle. The usage of aircraft materials has been primarily driven by the need for lighter, stronger, and more robust metal alloys, rather than mitigation of corrosion. As such, the overall cost of corrosion management and aircraft downtime remains high. To illustrate, $5.67 billion or 23.6% of total sustainment costs was spent on aircraft corrosion management, as well as 14.1% of total NAD for the US Air Force aviation and missiles in the fiscal year of 2018. The ability to detect and monitor corrosion will allow for a more efficient and cost-effective corrosion management strategy, and will therefore, minimize maintenance costs and downtime, and to avoid unexpected failure associated with corrosion. Conventional and commercial efforts in corrosion detection on aircrafts have focused on visual and other field detection approaches which are time- and usage-based rather than condition-based; they are also less effective in cases where the corroded area is inaccessible (e.g., fuel tank) or hidden (rivets). The ability to target and detect specific corrosion by-products associated with the metals/metal alloys (chloride ions, fluoride ions, iron oxides, aluminum chlorides etc.), corrosion environment (pH, wetness, temperature), along with conventional approaches for physical detection of corrosion can provide early corrosion detection as well as enhanced reliability of corrosion detection. The paper summarizes the state-of-art of corrosion sensing and measurement technologies for schedule-based inspection or continuous monitoring of physical, environmental and chemical presence associated with corrosion. The challenges are reviewed with regards to current gaps of corrosion detection and the complex task of corrosion management of an aircraft, with a focused overview of the corrosion factors and corrosion forms that are pertinent to the aviation industry. A comprehensive overview of thin film sensing techniques for corrosion detection and monitoring on aircrafts are being conducted. Particular attention is paid to innovative new materials, especially graphene-derived thin film sensors which rely on their ability to be configured as a conductor, semiconductor, or a functionally sensitive layer that responds to corrosion factors. Several thin film sensors have been detailed in this review as highly suited candidates for detecting corrosion through direct sensing of corrosion by-products in conjunction with the aforementioned physical and environmental corrosion parameters. The ability to print/pattern these thin film materials directly onto specific aircraft components, or deposit them onto rigid and flexible sensor surfaces and interfaces (fibre optics, microelectrode structures) makes them highly suited for corrosion monitoring applications.

Intelligent Packaging for Real-Time Monitoring of Food-Quality: Current and Future Developments

Food packaging encompasses the topical role of preserving food, hence, extending the shelf-life, while ensuring the highest quality and safety along the production chain as well as during storage. Intelligent food packaging further develops the functions of traditional packages by introducing the capability of continuously monitoring food quality during the whole chain to assess and reduce the insurgence of food-borne disease and food waste. To this purpose, several sensing systems based on different food quality indicators have been proposed in recent years, but commercial applications remain a challenge. This review provides a critical summary of responsive systems employed in the real-time monitoring of food quality and preservation state. First, food quality indicators are briefly presented, and subsequently, their exploitation to fabricate intelligent packaging based on responsive materials is discussed. Finally, current challenges and future trends are reviewed to highlight the importance of concentrating efforts on developing new functional solutions.

Carbon Dots as Sensing Layer for Printed Humidity and Temperature Sensors

This work presents an innovative application of carbon dots (Cdots) nanoparticles as sensing layer for relative humidity detection. The developed sensor is based on interdigitated capacitive electrodes screen printed on a flexible transparent polyethylene terephthalate (PET) film. Cdots are deposited on top of these electrodes. An exhaustive characterization of the nanoparticles has been conducted along with the fabrication of the sensor structure. The accompanied experiments give all the sensibility to the Cdots, showing its dependence with temperature and exciting frequency. To the best of our knowledge, this work paves the path to the use of these kind of nanoparticles in printed flexible capacitive sensors aimed to be employed in the continuously expanding Internet of Things ecosystem.

Editorial for the Special Issue on Advances in Capacitive Sensors

Capacitive sensors are an active research area with multiple advantages and great applicability [...].

Fabrication and Characterization of Roll-to-Roll-Coated Cantilever-Structured Touch Sensors

It is common in the field of printed electronics that polydimethylsiloxane (PDMS) be used as a dielectric layer for capacitive sensors because of its high elasticity and restoration force. However, capacitive sensors with the PDMS dielectric layer have a lower sensitivity than those with an air-gap structure that has been fabricated by the conventional micro-electromechanical system (MEMS) process. This paper presents a productive method for fabricating air-gap structures for touch sensors by roll-to-roll slot-die coating. The air-gap is formed by coating and removing a sacrificial layer. Cantilever-structured capacitive touch sensors with an air-gap are fabricated as follows: First, the bottom electrode, the dielectric layer, and the poly(vinyl alcohol) (PVA) sacrificial layer are roll-to-roll slot-die-coated on a flexible substrate. In addition, the spacer layer is spin-coated. On the sacrificial and spacer layers, the top electrode and structural layer are formed by spin-coating. Then, the air-gap and cantilever structure are made by removing the sacrificial layer in water. The cantilever-structured sensor samples are examined in terms of sensitivity, hysteresis, and repeatability. In particular, the electrical performance of the samples is compared to those with the PDMS dielectric layer. Experimental results show that the cantilever-structured sensor samples have significantly higher sensitivity compared to those with the PDMS dielectric layer.