Dynamically Switchable Polarization-Independent Triple-Band Perfect Metamaterial Absorber Using a Phase-Change Material in the Mid-Infrared (MIR) Region

All silicon MIR super absorber using fractal metasurfaces

Perfect absorbers can be used in photodetectors, thermal imaging, microbolometers, and thermal photovoltaic solar energy conversions. The spectrum of Mid-infrared (MIR) wavelengths offers numerous advantages across a wide range of applications. In this work, we propose a fractal MIR broadband absorber which is composed of three layers: metal, dielectric, and metal (MDM), with the metal being considered as n-type doped silicon (D-Si) and the dielectric is silicon carbide (SiC). The architectural design was derived from the Sierpinski carpet fractal, and different building blocks were simulated to attain optimal absorption. The 3D finite element method (FEM) approach using COMSOL Multiphysics software is used to obtain numerical results. The suggested fractal absorber exhibits high absorption enhancement for MIR in the range between 3 and 9 µm. D-Si exhibits superior performance compared to metals in energy harvesting applications that utilize plasmonics at the mid-infrared range. Typically, semiconductors exhibit rougher surfaces than noble metals, resulting in lower scattering losses. Moreover, silicon presents various advantages, including compatibility with complementary metal-oxide-semiconductor (CMOS) and simple manufacturing through conventional silicon fabrication methods. In addition, the utilization of doped silicon material in the mid-IR region facilitates the development of microscale integrated plasmonic devices.

Continuous programmable mid-infrared thermal emitter and camouflage based on the phase-change material In3SbTe2

In3SbTe2 (IST), a new non-volatile phase-change material (PCM), promises highly tunable infrared optical properties and offers a distinct path to the significant modulation of its optical scattering fingerprint, suggesting tremendous applications. In this Letter, we demonstrate and optimize a four-layer emitter based on IST, achieving an ultra-wide average emissivity variation of more than 94% in the middle-infrared region (MIR, 3-5 µm). This remarkable emissivity difference can be further continuously modified by changing the structural composition in terms of the amorphous and crystalline states of the IST layers. Based on this continuous programmable emission, the MIR emission characteristics of marble, maple leaf, and blue polyvinyl chloride are successfully imitated together on a desert background, demonstrating the programmable and multi-level MIR optical camouflage capabilities of IST. This work provides a promising platform for continuously modulating emission characteristics and offers a reference for the subsequent application of programmable optical devices.

Programmable nanophotonic planar resonator filter-absorber based on phase-change InSbTe

Reconfigurable plasmonic-photonic electromagnetic devices have been incessantly investigated for their great ability to optically modulate through external stimuli to meet today's emerging needs, with chalcogenide phase-change materials being promising candidates due to their remarkably unique electrical and optics, enabling new perspectives in recent photonic applications. In this work, we propose a reconfigurable resonator using planar layers of stacked ultrathin films based on Metal-dielectric-PCM, which we designed and analyzed numerically by the Finite Element Method (FEM). The structure is based on thin films of Gold (Au), aluminum oxide (Al2O3), and PCM (In3SbTe2) used as substrate. The modulation between the PCM phases (amorphous and crystalline) allows the alternation from the filter to the absorber structure in the infrared (IR) spectrum (1000-2500 nm), with an efficiency greater than 70% in both cases. The influence of the thickness of the material is also analyzed to verify tolerances for manufacturing errors and dynamically control the efficiency of transmittance and absorptance peaks. The physical mechanisms of field coupling and transmitted/absorbed power density are investigated. We also analyzed the effects on polarization angles for Transversal Electric (TE) and Transversal Magnetic (TM) polarized waves for both cases.

Focusing on the Development and Current Status of Metamaterial Absorber by Bibliometric Analysis

In this paper, a total of 4770 effective documents about metamaterial absorbers were retrieved from the Web of Science Core Collection database. We scientifically analyzed the co-occurrence network of co-citation analysis by author, country/region, institutional, document, keywords co-occurrence, and the timeline of the clusters in the field of metamaterial absorber. Landy N. I.'s, with his cooperator et al., first experiment demonstrated a perfect metamaterial absorber microwave to absorb all incidents of radiation. From then on, a single-band absorber, dual-band absorber, triple-band absorber, multi-band absorber and broad-band absorber have been proposed and investigated widely. By integrating graphene and vanadium dioxide to the metamaterial absorber, the frequency-agile functionality can be realized. Tunable absorption will be very important in the future, especially metamaterial absorbers based on all-silicon. This paper provides a new research method to study and evaluate the performance of metamaterial absorbers. It can also help new researchers in the field of metamaterial absorbers to achieve the development of research content and to understand the recent progress.

Editorial for the Special Issue on Miniature Optoelectronic Resonators and Oscillators

The idea of developing oscillators, which can potentially replace electric oscillators such as those based on quartz, is interesting.&nbsp.

A Review: The Functional Materials-Assisted Terahertz Metamaterial Absorbers and Polarization Converters

When metamaterial structures meet functional materials, what will happen? The recent rise of the combination of metamaterial structures and functional materials opens new opportunities for dynamic manipulation of terahertz wave. The optical responses of functional materials are greatly improved based on the highly-localized structures in metamaterials, and the properties of metamaterials can in turn be manipulated in a wide dynamic range based on the external stimulation. In the topical review, we summarize the recent progress of the functional materials-based metamaterial structures for flexible control of the terahertz absorption and polarization conversion. The reviewed devices include but are not limited to terahertz metamaterial absorbers with different characteristics, polarization converters, wave plates, and so on. We review the dynamical tunable metamaterial structures based on the combination with functional materials such as graphene, vanadium dioxide (VO2) and Dirac semimetal (DSM) under various external stimulation. The faced challenges and future prospects of the related researches will also be discussed in the end.