Nature-Inspired Structures Applied in Heat Transfer Enhancement and Drag Reduction

Replenishment of the Gas in a Hydrophobically-Structured Surface by Mass Transfer at the Liquid-Gas Interface for Improving the Stability of Entrapped Gas

The underwater nonwetted state on a superhydrophobic surface is hardly maintained in flowing water because the entrapped gas dissolves into the water or is carried off by flow. Therefore, a source gas is necessary to maintain a superhydrophobic state for its applications under realistic conditions. As detailed in this paper, based on the gas entrapped on a hydrophobic structured surface, the gas regeneration was experimentally achieved to replenish the losses of gas carried off by the flowing and reduced through dissolution. Furthermore, the mechanism of mass transfer at the liquid-gas interface was investigated by simulation. The results indicated that water molecules at a liquid-gas interface should escape to entrapped gas when water content didn't reach saturation. This phenomenon could be due to the evaporation at the liquid-gas interface. With the increasing water content in the entrapped gas, the evaporation rate at the liquid-gas interface descended gradually. Under the action of flowing, the substances containing high concentrations of water molecule was washed away at the liquid-gas interface. Therefore, the low concentration of the water molecule at the liquid-gas interface was created. As a result, the equilibrium of water and gas at the liquid-gad interface was broken, and the evaporation continued to replenish the lost gas. Overall, the presented results in this study could be considered a promising candidate for replenishing the lost gas in hydrophobic structured surfaces by mass transfer at the liquid-gas interface.

A Porous Media Leakage Model of Contact Mechanical Seals Considering Surface Wettability

The fluid leakage channel found in contact mechanical seals belongs to the microchannel category. Thus, upon further inspection, the influence of surface wettability and other factors neglected in previous studies becomes obvious. The porous leakage model of contact mechanical seals considering the surface wettability presented in this paper was based on the Cassie model and slip theory. The variations of the microchannel slip length and the velocity under various wettability conditions were studied and the relationship between the slip length and the apparent contact angle was established. Moreover, using porous media theory, the theoretical model of the leakage rate in contact mechanical seals considers the surface wettability depending on various parameters. The observed parameters included the surface contact angle, sealing medium pressure, viscosity coefficient, fractal dimension, and maximum pore diameter. The simulation results obtained using the proposed model have shown that the leakage rate increases with the increase of the apparent contact angle. Particularly when the contact pressure is small, the influence of the surface wettability is more significant. Furthermore, the leakage rate results obtained via the proposed model were compared to those of existing models. The comparison confirmed that the proposed model is applicable and that the necessity of considering wettability significantly affects the leakage rate calculation accuracy. The proposed model lays a foundation for further improving the calculation accuracy, making it easier for both the researchers and practitioners to suppress the leakage in contact mechanical seals.

Influence of Groove Structure Parameters Based on Optimal Mass Transfer Coefficient on Vaporization Characteristics and Sealing Performance of Liquid Film Mechanical Seals

In this study, a spiral groove liquid film vaporization model based on the viscosity–temperature equation, fluid internal friction, saturation temperature, and pressure relationship equation was established. Using a multiphase flow model based on the finite volume method, the influence of the change in the mass transfer coefficient on the vaporization of the liquid film was studied. Moreover, the influence law of structural parameter changes in liquid film vaporization characteristics and sealing performance was analyzed. The results indicate that, with an increase in the mass transfer coefficient, the average vapor phase volume fraction first increases and then gradually stabilizes. When calculating the average vapor phase volume fraction, it is necessary to consider the influence of the mass transfer coefficient, whereas its effect on the opening force and leakage can usually be neglected. Under the optimal mass transfer coefficient conditions, the average vapor phase volume fraction increases with an increase in the helix angle, groove-weir ratio, and groove depth. By comparison, with an increase in the groove-diameter ratio, the average vapor phase volume fraction first increases and then decreases. The opening force decreases with an increase in the helix angle, groove-to-weir ratio, and groove depth. On the other hand, it first decreases and then increases with an increase in the groove-diameter ratio. The leakage rate increases first and then stabilizes with an increase in the helix angle. Moreover, it increases continuously with an increase in the groove-diameter ratio, groove-weir ratio, and groove depth.