A Thermocycler Using a Chip Resistor Heater and a Glass Microchip for a Portable and Rapid Microchip-Based PCR Device

Design of a Template-Based Electrophoretically Assisted Micro-Ultrasonic Machining Micro-Channel Machine Tool and Its Machining Experiment

In order to achieve the high-precision and high-efficiency machining of micro-channels for hard and brittle materials, the authors innovatively proposed a new technology called template-based electrophoretically assisted micro-ultrasonic machining (TBEPAMUSM). This technology transfers the micro-channel shape punch-pin to the workpiece material through micro-ultrasonic machining to form a micro-channel. At the same time, it uses the electrophoretic properties of ultra-fine abrasive particles to ensure the existence of abrasive particles in the machining area by applying a DC electric field. According to the new technology machining principle, a machine tool of TBEPAMUSM was designed and developed. The machine tool hardware adopts a C-shaped structure, including a marble platform, an ultrasonic vibration system, a micro three-dimensional motion platform, a working fluid tank, and a pressure sensor. The machine tool intelligent control system is developed based on LabVIEW, including the initialization module, fast positioning module, constant force tool setting module, constant force control machining module, and real-time coordinate display module. Micro-channels with different structures are machined on single-crystal silicon and soda-lime glass using the designed machine tool and the developed control system. The results show that: when electrophoresis assistance is applied in machining, the edge chipping phenomenon of the micro-channel is significantly reduced, the surface roughness is reduced by about 20%, and the machining efficiency is increased by about 4%.

A Cost-Effective Nucleic Acid Detection System Using a Portable Microscopic Device

A fluorescence microscope is one of the most important tools for biomedical research and laboratory diagnosis. However, its high cost and bulky size hinder the application of laboratory microscopes in space-limited and low-resource applications. Here, in this work, we proposed a portable and cost-effective fluorescence microscope. Assembled from a set of 3D print components and a webcam, it consists of a three-degree-of-freedom sliding platform and a microscopic imaging system. The microscope is capable of bright-field and fluorescence imaging with micron-level resolution. The resolution and field of view of the microscope were evaluated. Compared with a laboratory-grade inverted fluorescence microscope, the portable microscope shows satisfactory performance, both in the bright-field and fluorescence mode. From the configurations of local resources, the microscope costs around USD 100 to assemble. To demonstrate the capability of the portable fluorescence microscope, we proposed a quantitative polymerase chain reaction experiment for meat product authenticating applications. The portable and low-cost microscope platform demonstrates the benefits in space-constrained environments and shows high potential in telemedicine, point-of-care testing, and more.

Conductive Silver/Carbon Fiber Films for Rapid Detection of Human Coronavirus

Polymerase chain reaction has gained attention since the outbreak of novel coronavirus in 2019. Due to its high specificity and capability for early detection, it is considered a standard method for the diagnosis of infectious diseases. However, the conventional thermocyclers used for nucleic acid amplification are not suitable for point-of-care testing applications, as they require expensive instruments, high-power consumption, and a long turnaround time. To suppress the widespread of the pandemic, there is an urgent need for the development of a rapid, inexpensive, and portable thermal cycler. Therefore, in this paper, we present a conductive silver/carbon fiber film-based thermal cycler with low power consumption (<5 W), efficient heating (~4.5 °C/s), low cost (<USD 200), and handheld size (11.5 × 7.1 × 7.5 mm). The conductive film, which was used as a heating source of the thermal cycler, was fabricated by the electrochemical deposition method. The successful coating of Ag was characterized by a scanning electron microscope and confirmed by energy-dispersive X-ray spectroscopy. The film showed excellent electrical/thermal conductivity and durability. Using our thermal cycler, 35 cycles of amplification were accomplished within 10 min. We also successfully demonstrated the multiplexed detection of various human coronaviruses (e.g., OC43, 229E, and NL63) using our thermal cycler.