Voltammetric Determination of Isoniazid in the Presence of Acetaminophen Utilizing MoS2-Nanosheet-Modified Screen-Printed Electrode

Development of a highly sensitive voltammetric sensor for the detection of folic acid by using MoS2 and ionic liquid-modified carbon paste electrode

Background and purpose

Sensitive analytical determination of folic acid is important in clinical laboratories due to its versatile biological functions.

Experimental approach

A simple folic acid sensor was successfully fabricated based on two-dimensional transition metal dichalcogenide MoS2 modified carbon ionic liquid paste electrode (MoS2-CILPE). The electrochemical properties of the fabricated electrode were investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and chronoamperometry.

Key results

The fabricated sensor displayed excellent electroactivity towards folic acid using CV. Under optimal conditions (0.1 M PBS (pH 7.0)), the DPV oxidation peak current was proportional to folic acid concentration in the range from 5.0 μM to 100.0 μM with an estimated limit of detection of 1.0 μM and limit of quantification of 5.0 μM.

Conclusion

The ability of the sensor for routine analyses was demonstrated by the detection of folic acid present in folic acid tablets and urine samples with appreciable recovery values.

Nickel-Cobalt Salen Organometallic Complexes Encapsulated in Mesoporous NaA Nanozeolite for Electrocatalytic Quantification of Ascorbic Acid and Paracetamol

Goal of current study was fabrication of novel voltammetric nanosensor for the synchronize quantification of ascorbic acid (AA) and paracetamol (PAR) by nickel-cobalt salen complexes encapsulated in the supercages of NaA nanozeolite modified carbon paste electrode (NiCoSalenA/CPE). For this purpose, NiCoSalenA nanocomposite was firstly prepared and characterized by various methods. Also, cyclic voltammetry (CV), choronoamperometry (CHA) and differential pulse voltammetry (DPV) were utilized to evaluate performance of the modified electrodes. The effects of pH and modifier amount were considered on the electrochemical oxidation of AA and PAR on the surface of NiCoSalenA/CPE. Results from this method indicated that pH of 3.0 in phosphate buffer solution (0.1 M) and 15 wt% of NiCoSalenA nanocomposite in the modified CPE results in the maximum current density. The oxidation signals of AA and PAR was amplified affectively at NiCoSalenA/CPE versus unmodified CPE. The limit of detection (LOD) and linear dynamic range (LDR) for the simultaneous measurement of them were founds to be 0.82 and 2.73-80.70 for AA and 0.51 µM, 1.71-32.50 and 32.50-137.60 µM for PAR, respectively. The catalytic rate constants (kcat) were attained to be 3.73 × 107 and 1.27 × 107 cm3 mol-1 s-1 for AA and PAR via CHA method, respectively. Also, the amounts of diffusion coefficient (D) were found to be 1.12 × 10-7 and 1.92 × 10-7 cm2 s-1 for AA and PAR, respectively. The average value of electron transfer rate constant between NiCoSalenA/CPE and PAR was obtained to be 0.016 s-1. The NiCoSalen-A/CPE displayed worthy stability, repeatability and extraordinary recovery for simultaneous measurements of AA and PAR. Application of offered sensor was confirmed by quantifying concentrations of AA and PAR in human serum solution as a real sample.

The development of disposable electrochemical sensor based on MoSe2-rGO nanocomposite modified screen printed carbon electrode for amitriptyline determination in the presence of carbamazepine, application in biological and water samples

The present attempt developed a simple sensing system based on the modification of screen-printed carbon electrode (SPCE) with MoSe₂/reduced graphene oxide (rGO) nanocomposite (MoSe₂-rGO/SPCE) to voltammetrically co-detect amitriptyline and carbamazepine. Different techniques such as field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) were employed to characterize MoSe₂-rGO nanocomposite morphology and structure. Moreover, chronoamperometry, differential pulse voltammetry (DPV) and linear sweep voltammetry (LSV) were utilized to explore the electrochemical oxidation of amitriptyline. Data revealed a great current sensitivity for the MoSe₂-rGO/SPCE towards amitriptyline. The peak currents of amitriptyline oxidation on the MoSe₂-rGO/SPCE had linear dynamic range (0.02-380.0 μM) and a narrow limit of detection (0.007 μM). The MoSe₂-rGO/SPCE was successful in sensing carbamazepine and amitriptyline in real specimens, with appreciable recovery rates.

Two-Dimensional Non-Carbon Materials-Based Electrochemical Printed Sensors: An Updated Review

Recently, there has been increasing interest in electrochemical printed sensors for a wide range of applications such as biomedical, pharmaceutical, food safety, and environmental fields. A major challenge is to obtain selective, sensitive, and reliable sensing platforms that can meet the stringent performance requirements of these application areas. Two-dimensional (2D) nanomaterials advances have accelerated the performance of electrochemical sensors towards more practical approaches. This review discusses the recent development of electrochemical printed sensors, with emphasis on the integration of non-carbon 2D materials as sensing platforms. A brief introduction to printed electrochemical sensors and electrochemical technique analysis are presented in the first section of this review. Subsequently, sensor surface functionalization and modification techniques including drop-casting, electrodeposition, and printing of functional ink are discussed. In the next section, we review recent insights into novel fabrication methodologies, electrochemical techniques, and sensors' performances of the most used transition metal dichalcogenides materials (such as MoS₂, MoSe₂, and WS₂), MXenes, and hexagonal boron-nitride (hBN). Finally, the challenges that are faced by electrochemical printed sensors are highlighted in the conclusion. This review is not only useful to provide insights for researchers that are currently working in the related area, but also instructive to the ones new to this field.

A novel voltammetric amaranth sensor based on screen printed electrode modified with polypyrrole nanotubes

Azo dyes are the most used type of dye in the textile industry. Some of these dyes have the potential to be extremely toxic to both human health and the environment. The purpose of this study was to develope an electrochemical sensor for detection of amaranth. The electrochemical sensor based on the modification of a screen-printed electrode via polypyrrole nanotubes (PPy NTs/SPE) for detection of amaranth was developed. The preparation of PPy NTs was performed through the pyrrole monomer oxidation with iron (III) chloride in exposure to methyl orange as structure-guiding agent. Findings exhibited an excellent electrocatalytic activity of as-fabricated sensor for amaranth detection. Our sensor under the optimized circumstances also had a broad linear dynamic range (between 0.03 μM and 290.0 μM) and a narrow limit of detection (0.01 μM) towards the amaranth detection. Moreover, the proposed sensor could practically and successfully determine the amaranth content present in the real food specimens, with acceptable recovery rates.

Simple Preparation and Characterization of Hierarchical Flower-like NiCo2O4 Nanoplates: Applications for Sunset Yellow Electrochemical Analysis

The current work was performed to construct a novel electrochemical sensing system for determination of sunset yellow via the modification of screen-printed graphite electrode modified with hierarchical flower-like NiCo₂O₄ nanoplates (NiCo₂O₄/SPGE). The prepared material (hierarchical flower-like NiCo₂O₄ nanoplates) was analyzed by diverse microscopic and spectroscopic approaches for the crystallinity, composition, and morphology. Chronoamperometry, differential pulse voltammetry, linear sweep voltammetry, and cyclic voltammetry were used for determination of the electrochemical behavior of sunset yellow. The as-fabricated sensor had appreciable electro-catalytic performance and current sensitivity in detecting the sunset yellow. There were some advantages for NiCo₂O₄/SPGE under the optimized circumstances of sunset yellow determination, including a broad dynamic linear between 0.02 and 145.0 µM, high sensitivity of 0.67 μA/(μM.cm²), and a narrow limit of detection of 0.008 μM. The practical applicability of the proposed sensor was verified by determining the sunset yellow in real matrices, with satisfactory recoveries.

Electrochemical Sensor Based on Ni-Co Layered Double Hydroxide Hollow Nanostructures for Ultrasensitive Detection of Sumatriptan and Naproxen

In this work, Ni-Co layered double hydroxide (Ni-Co LDH) hollow nanostructures were synthesized and characterized by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), and Fourier-transform infrared spectroscopy (FT-IR) techniques. A screen-printed electrode (SPE) surface was modified with as-fabricated Ni-Co LDHs to achieve a new sensing platform for determination of sumatriptan. The electrochemical behavior of the Ni-Co LDH-modified SPE (Ni-CO LDH/SPE) for sumatriptan determination was investigated using voltammetric methods. Compared with bare SPE, the presence of Ni-Co LDH was effective in the enhancement of electron transport rate between the electrode and analyte, as well as in the significant reduction of the overpotential of sumatriptan oxidation. Differential pulse voltammetry (DPV) was applied to perform a quantitative analysis of sumatriptan. The linearity range was found to be between 0.01 and 435.0 μM. The limits of detection (LOD) and sensitivity were 0.002 ± 0.0001 μM and 0.1017 ± 0.0001 μA/μM, respectively. In addition, the performance of the Ni-CO LDH/SPE for the determination of sumatriptan in the presence of naproxen was studied. Simultaneous analysis of sumatriptan with naproxen showed well-separated peaks leading to a quick and selective analysis of sumatriptan. Furthermore, the practical applicability of the prepared Ni-CO LDH/SPE sensor was examined in pharmaceutical and biological samples with satisfactory recovery results.

A Voltammetric Sensor for the Determination of Hydroxylamine Using a Polypyrrole Nanotubes-Modified Electrode

In this work, we develop an electrochemical sensor using a polypyrrole nanotubes-modified graphite screen-printed electrode (PPy NTs/GSPE) for sensing hydroxylamine. The PPy NTs/GSPE-supported sensor has an appreciable electrocatalytic performance and great stability for hydroxylamine oxidation. Compared to a bare graphite screen-printed electrode, we demonstrate that using the PPy NTs/GSPE leads to a significant reduction in the oxidation potential of hydroxylamine. The standard curve shows a linear relationship ranging from 0.005 to 290.0 μM (R2  =  0.9998), with a high sensitivity (0.1349 μA/μM) and a narrow limit of detection (LOD) of 0.001 μM. In addition, the PPy NTs/GSPE has satisfactory outcomes for hydroxylamine detection in real specimens.

Surface amplification of graphite screen printed electrode using reduced graphene oxide/polypyrrole nanotubes nanocomposite; a powerful electrochemical strategy for determination of sulfite in food samples

The present research presents synthesis and substantial utilization of a nanocomposite of reduced graphene oxide/polypyrrole nanotubes to modify graphite screen printed electrode (rGO/PPy NTs-GSPE) for detection of sulfite. The nanocomposite preparation was done by hydrothermal protocol, followed by characterization by energy-dispersive X-ray (EDX) and field emission-scanning electron microscopy (FE-SEM). Electrocatalytic sensing of sulfite is carried out using differential pulse voltammetric (DPV), linear sweep voltammetry (LSV), cyclic voltammetric (CV), and Chronoamperometry. Electrochemical behaviors of modified and unmodified electrodes were explored with CV method. In addition, DPV was employed for anodic peak and quantitatively detecting sulfite. The DPV results unveiled a linear response of the sensor to various sulfite contents (0.04-565.0 μM) with a narrow detection limit (0.01 μM) and admirable sensitivity (0.0483 μA/μΜ). The diffusion coefficient (D) for sulfite using rGO/PPy NTs-GSPE, 9.9 × 10^-6 cm ²/s was obtained. The sensor was also successful in the sulfite detection in real specimens.

Screen-printed graphite electrode modified with Co3O4nanoparticles and 2D graphitic carbon nitride as an effective electrochemical sensor for 4-aminophenol detection

We fabricated a new electrochemical 4-aminophenol sensor based on a nanocomposite of Co₃O₄nanoparticles and graphite carbon nitride (Co₃O₄@g-C₃N₄), used for the modification of a screen-printed electrode (Co₃O₄@g-C₃N₄/SPE). The synthesized nanocomposite was characterized using field-emission scanning electron microscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction and Fourier transform-infrared (FT-IR) techniques. The electro-oxidation of 4-aminophenol in phosphate buffer solution (pH = 7.0) was investigated via cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The peak current of oxidation in the optimized conditions had a linear relationship with various 4-aminophenol contents (0.05-780.0μM) with a correlation coefficient of 0.9996 and the limit of detection (S/N = 3) of 1.5 × 10^-8M. The developed method was successful to determine 4-aminophenol in real specimens, with acceptable outcomes.

Construction of modified screen-printed graphite electrode for the application in electrochemical detection of sunset yellow in food samples

The current work introduced a novel electrochemical sensor (screen-printed graphite electrode (SPGE) modified with MnO₂ nanorods anchored graphene oxide nanocomposite (MnO₂ NRs/GO) for sensitive determination of sunset yellow. The characterization of MnO₂ NRs/GO nanocomposite synthesized through a simple hydrothermal approach was determined employing varied analytical equipment like Field emission-scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). Chronoamperometric measurements, differential pulse voltammetry (DPV), cyclic voltammetry (CV) and linear sweep voltammetry (LSV) were recruited to recognize the electrochemical oxidation of sunset yellow on the MnO₂ NRs/GO/SPGE. The results of CV proved that the as-synthesized MnO₂ NRs/GO nanocomposite has a good electrocatalytic activity toward sunset yellow. The MnO₂ NRs/GO/SPGE electrode under optimized conditions using the DPV possessed a linear response for different concentrations of sunset yellow (between 0.01 and 115.0 μM) with a low limit of detection (LOD) (0.008 μM). Finally, the impressive applicability of this sensor was confirmed via real sample analysis with excellent recoveries (between 97.3 and 104.6%).

Hydrothermal synthesis of CuFe2O4 nanoparticles for highly sensitive electrochemical detection of sunset yellow

The sunset yellow, as a synthetic food coloring azo dye, was detected in the present work using a new sensitive and selective sensor based on the modification of screen-printed electrode surface with Copper ferrite nanoparticles (CuFe₂O₄/SPE). Thus, a facile hydrothermal protocol was performed to prepare the CuFe₂O₄ nanoparticles, followed by characterization applying valid techniques, including Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS) and field-emission scanning electron microscopy (FE-SEM). Chronoamperometry, differential pulse voltammetry (DPV) and cyclic voltammetry (CV) were employed to determine the electrochemical behavior of as-fabricated sensor. According to the electrochemical findings, a greater anodic peak current was found for the sunset yellow oxidation on the CuFe₂O₄/SPE than that on the unmodified SPE. The electrocatalytic response for the sunset yellow oxidation on the CuFe₂O₄/SPE in phosphate buffer (0.1 M, pH = 7.0) was effective, with an excellent sensitivity (0.1919 μA μM^-1). There was a linear relationship between the voltammetric current and different sunset yellow concentrations (0.03-100.0 μM). The calculated limit of detection (LOD = 3Sb/m) for the sunset yellow was 0.009 μM.

Glassy Carbon Electrode Modified with N-Doped Reduced Graphene Oxide Sheets as an Effective Electrochemical Sensor for Amaranth Detection

Amaranth is one of the synthetic azo colorants used to improve the appearance and to increase the appeal of some foods and soft drinks. The excessive consumption of amaranth can be associated with health side effects, emphasizing the need to monitor this food dye. Accordingly, the present study aimed to introduce an electrochemical sensor of glassy carbon electrode (GCE) modified with N-doped reduced graphene oxide (N-rGO), N-rGO/GCE, to detect the amaranth sensitively and rapidly. Several electrochemical techniques such as differential pulse voltammetry (DPV), linear sweep voltammetry (LSV), chronoamperometry (CHA), and cyclic voltammetry (CV) are exploited for the evaluation of the efficiency of the developed electrode for the detection of amaranth. We found that N-rGO/GCE enhanced amaranth oxidation, thus significantly elevating the current signal. Amaranth showed that calibration curves ranged from 0.1 to 600.0 µM, and the limit of detection (LOD) (S/N = 3) was 0.03 μM. Finally, the developed sensor was effectively applied for real samples (tap water, apple juice, and orange juice) with acceptable recovery values from 96.0 to 104.3%.