Paper-Based Electrodeposition Chip for 3D Alginate Hydrogel Formation

Continuous and controllable electro-fabrication of antimicrobial copper-alginate dressing for infected wounds treatment

The contamination of chronic wound with bacteria especially methicillin-resistant Staphylococcus aureus (MRSA) is considered as the major factor interferencing normal wound healing. There still remain great challenges in developing safe and effective wound dressings with wide-spectrum antibacterial functions. Alginate hydrogel is a common dressing for wound treatment. Copper is one of the trace elements in human body with inherent antibacterial activity. Traditional methods for preparing a structure-controlled copper-alginate antibacterial matrix are difficult however, due to the fast and uncontrolled gelation between alginate and metal ions. In this work, we report an electrodeposition method for rapid fabrication of copper cross-linked alginate antibacterial films (Cu²⁺-Alg) with controlled structure and copper content, which is relied on an electrical signal controlled release of copper ions from the reaction of insoluble salt Cu₂(OH)₂CO₃ and the generated protons via water electrolysis on anode. The results prove that the physical structure and chemical composition of the electrodeposited Cu²⁺-Alg films can be continuously modulated by the imposed charges during electrodeposition. In vitro tests demonstrate the film has Cu²⁺ content-dependent bactericidal activities. Film's cytocompatibility is well controlled by the imposed charges for Cu²⁺-Alg fabrication. The MRSA infected wound model in vivo also indicates that Cu²⁺-Alg film can effectively eliminate bacterial infection and suppress host inflammatory responses. We believe this study demonstrates a convenient and controllable strategy to fabricate alginate antibacterial dressings with potential applications for infected wound treatment. More broadly, our work reveals electrodeposition is a general and simple platform to design alginate films with versatile functions.

Biofabrication of controllable alginate hydrogel cell scaffolds based on bipolar electrochemistry

Bipolar electrochemistry successfully realized the electrodeposition of calcium alginate hydrogels in specific target areas in tissue engineering. However, the shape and quantity of three-dimensional cannot be accurately controlled. We presented a novel growth model for fabricating hydrogels based on bipolar electrochemical by patterned bipolar electrodes using photolithography. This work highlights pattern customization and quantitative control of hydrogels in cell culture platforms. Furthermore, alginate hydrogels with different heights can be controlled by adjusting the key parameters of the growth model. This strategy exhibits promising potential for cell-oriented scaffolds in tissue engineering.

An Update on the Use of Alginate in Additive Biofabrication Techniques

BACKGROUND

Solid free forming (SFF) technique also called additive manufacturing process is immensely popular for biofabrication owing to its high accuracy, precision and reproducibility.

METHOD

SFF techniques like stereolithography, selective laser sintering, fused deposition modeling, extrusion printing, and inkjet printing create three dimension (3D) structures by layer by layer processing of the material. To achieve desirable results, selection of the appropriate technique is an important aspect and it is based on the nature of biomaterial or bioink to be processed.

RESULT & CONCLUSION

Alginate is a commonly employed bioink in biofabrication process, attributable to its nontoxic, biodegradable and biocompatible nature; low cost; and tendency to form hydrogel under mild conditions. Furthermore, control on its rheological properties like viscosity and shear thinning, makes this natural anionic polymer an appropriate candidate for many of the SFF techniques. It is endeavoured in the present review to highlight the status of alginate as bioink in various SFF techniques.

Review of Electrochemically Triggered Macromolecular Film Buildup Processes and Their Biomedical Applications

Macromolecular coatings play an important role in many technological areas, ranging from the car industry to biosensors. Among the different coating technologies, electrochemically triggered processes are extremely powerful because they allow in particular spatial confinement of the film buildup up to the micrometer scale on microelectrodes. Here, we review the latest advances in the field of electrochemically triggered macromolecular film buildup processes performed in aqueous solutions. All these processes will be discussed and related to their several applications such as corrosion prevention, biosensors, antimicrobial coatings, drug-release, barrier properties and cell encapsulation. Special emphasis will be put on applications in the rapidly growing field of biosensors. Using polymers or proteins, the electrochemical buildup of the films can result from a local change of macromolecules solubility, self-assembly of polyelectrolytes through electrostatic/ionic interactions or covalent cross-linking between different macromolecules. The assembly process can be in one step or performed step-by-step based on an electrical trigger affecting directly the interacting macromolecules or generating ionic species.

Electrical signals triggered controllable formation of calcium-alginate film for wound treatment

Wound dressings play important roles in the management of wounds, and calcium cross-linked alginate (Ca²⁺-Alg) is a commonly used hydrogel that is adapted for wound treatment. However, conventional methods for fabricating Ca²⁺-Alg hydrogels can be tedious and difficult to control because of the rapid Ca²⁺-induced gelation of alginate. In this study, An electrodeposition method was used to rapidly and controllably fabricate Ca²⁺-Alg films for wound treatment. Several measures of film growth (e.g., thickness and mass) are shown to linearly correlate to the imposed charge transfer at the electrode. Similarly, this charge transfer was also observed to control important physicochemical wound healing properties such as water uptake and retention capacity. Furthermore, a wound healing animal test was performed to evaluate the performance of this electro-fabricated calcium alginate film for wound treatment. This in vivo study demonstrated that wounds dressed with an electro-fabricated Ca²⁺-Alg film closed faster than that of untreated wounds. Further, the new dermis tissue that formed was composed of reorganized and stratified epithelial layer, with fully developed connective tissue, hair follicle, sebaceous glands as well as aligned collagen. Therefore, our study indicates that this electrofabrication method for the rapid and controlled preparation of alginate film could provide exciting opportunities for wound treatment. More broadly, this study demonstrates the potential of electrochemistry for the fabrication of high performance polymeric materials. Here we report a rapid and controllable fabrication of free-standing alginate films by coupling anodic electrodeposition with subsequent peeling of deposited materials for wound dressing.

Hybrid 3D printing and electrodeposition approach for controllable 3D alginate hydrogel formation

Calcium alginate hydrogels are widely used as biocompatible materials in a substantial number of biomedical applications. This paper reports on a hybrid 3D printing and electrodeposition approach for forming 3D calcium alginate hydrogels in a controllable manner. Firstly, a specific 3D hydrogel printing system is developed by integrating a customized ejection syringe with a conventional 3D printer. Then, a mixed solution of sodium alginate and CaCO₃ nanoparticles is filled into the syringe and can be continuously ejected out of the syringe nozzle onto a conductive substrate. When applying a DC voltage (∼5 V) between the substrate (anode) and the nozzle (cathode), the Ca²⁺ released from the CaCO₃ particles can crosslink the alginate to form calcium alginate hydrogel on the substrate. To elucidate the gel formation mechanism and better control the gel growth, we can further establish and verify a gel growth model by considering several key parameters, i.e., applied voltage and deposition time. The experimental results indicate that the alginate hydrogel of various 3D structures can be formed by controlling the movement of the 3D printer. A cell viability test is conducted and shows that the encapsulated cells in the gel can maintain a high survival rate (∼99% right after gel formation). This research establishes a reliable method for the controllable formation of 3D calcium alginate hydrogel, exhibiting great potential for use in basic biology and applied biomedical engineering.