Fluid Flow and Mixing Induced by AC Continuous Electrowetting of Liquid Metal Droplet

A system for fluid pumping by liquid metal multi-droplets

The transportation and control of microfluidics have an important influence on the fields of biology, chemistry, and medicine. Pump systems based on the electrocapillary effect and room-temperature liquid metal droplets have attracted extensive attention. Flow rate is an important parameter that reflects the delivery performance of the pump systems. In the systems of previous studies, cylindrical structures are mostly used to constrain the droplet. The analysis and quantitative description of the influence of voltage frequency, alternating voltage, direct current voltage bias, and solution concentration on the flow rate are not yet comprehensive. Furthermore, the systems are driven by only one droplet, which limits the increase in flow rate. Therefore, a pump with a cuboid structure is designed and the droplet is bound by pillars, and the flow rate of the pump is increased by more than 200% compared with the cylindrical pump. For this structure, the mechanism of various factors on the flow rate is analyzed. To further enhance the flow rate, a pump system with multi-droplets is proposed. Moreover, the expression of flow velocity of the solution on the surface of each droplet and the relationship between the flow rate, alternating voltage, and the number of droplets are deduced. Finally, the potential of applying the multi-droplet cuboid pump system in drug delivery and analytical chemistry is demonstrated. Additionally, the core of the pump, the droplet area, is modularized, which breaks the overall structural limitations of the liquid metal pump and provides ideas for pump design.

Acoustofluidic Based Wireless Micropump for Portable Drug Delivery Applications. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2021;2021:1276-1279. [PMID: 34891518 DOI: 10.1109/embc46164.2021.9629811]

In this study, an acoustofluidic based wireless micropump for drug delivery was proposed and fabricated. The key actuator of this micropump is a small gigahertz piezoelectric resonator, which could induce strong fluidic streaming at low applied power. This acoustofluidic micropump has stable and accurate dosage resolution (7.0 μL), and sufficient flow rate (1.34 mL/min). The miniaturized size and wireless controlled operation prove it as a portable drug delivery system.Clinical Relevance- The acoustofluidic based micropump could apply for the drug administration in a safe, effective and stable form. It has potential to integrate with miniaturized sensors and electronic circuit to form portable drug delivery systems, realizing smart on-demand drug delivery.

A Study of Dielectrophoresis-Based Liquid Metal Droplet Control Microfluidic Device

This study presents a dielectrophoresis-based liquid metal (LM) droplet control microfluidic device. Six square liquid metal electrodes are fabricated beneath an LM droplet manipulation pool. By applying different voltages on the different electrodes, a non-uniform electric field is formed around the LM droplet, and charges are induced on the surface of the droplet accordingly, so that the droplet could be driven inside the electric field. With a voltage of ±1000 V applied on the electrodes, the LM droplets are driven with a velocity of 0.5 mm/s for the 2.0 mm diameter ones and 1.0 mm/s for the 1.0 mm diameter ones. The whole chip is made of PDMS, and microchannels are fabricated by laser ablation. In this device, the electrodes are not in direct contact with the working droplets; a thin PDMS film stays between the electrodes and the driven droplets, preventing Joule heat or bubble formation during the experiments. To enhance the flexibility of the chip design, a gallium-based alloy with melting point of 10.6 °C is used as electrode material in this device. This dielectrophoresis (DEP) device was able to successfully drive liquid metal droplets and is expected to be a flexible approach for liquid metal droplet control.

Pumping of electrolyte with mobile liquid metal droplets driven by continuous electrowetting: A full-scaled simulation study considering surface-coupled electrocapillary two-phase flow

With the excellent merits of both solid conductors and rheological fluids, liquid metal (LM) provides new opportunities to serve as flexible building blocks of miniaturized electronic and fluidic devices. The phenomenon of continuous electrowetting (CEW) has been long utilized for actuating LM contents in buffer medium, wherein an externally imposed voltage difference is responsible of manipulating the interfacial tension of deformable LM droplets. CEW effectively lowers the surface tension at the LM/electrolyte interface by driving bipolar counterions to the surface of conducting droplet. Since surface tension coefficient relies sensitively on the local voltage drop across the induced double layer, an electric-analogy Marangoni effect occurs even under a rather weak electric field in the presence of a surface gradient of the interfacial tension. CEW of LM routinely induces unidirectional pumping of electrolyte in the direction of applied electric field, with LM droplet translating oppositely within the device channel. Although this subject has received great attention from the microfluidic society in the past decade, previous reports concerned either the individual delivery of the suspension medium or the transport of LM droplet. Starting from this point, we offer herein a fully coupled physical description of two-phase flow dynamics occurring in CEW. The proposed simulation model successfully incorporates the synergy of the interfacial electrokinetic momentum transfer, surface tension on a curved surface, contact angle at the three-phase contact line as well as the gravity force density. The spatial-temporal motion of the contact interface is traced instantly with a moving mesh approach. By direct numerical simulation, the importance of the direct-current bias, additional alternating-current forcing, droplet size, initial ion adsorption in the process of CEW is addressed. Additionally, it is discovered that increasing the number of LM droplet is more cost-effective than enhancing the volume of a single drop in terms of achieving an improvement of the resulted electrocapillary pump performance, while the translational speed of the discrete droplet carrier does not make an observable change in response to a variation in the drop number. These results prove invaluable in terms of an elaborate design of smart on-chip electrokinetic frameworks embedding flexible LM contents in modern micro-total-analytical systems.

Asymmetrical Induced Charge Electroosmotic Flow on a Herringbone Floating Electrode and Its Application in a Micromixer

Enhancing mixing is of significant importance in microfluidic devices characterized by laminar flows and low Reynolds numbers. An asymmetrical induced charge electroosmotic (ICEO) vortex pair generated on the herringbone floating electrode can disturb the interface of two-phase fluids and deliver the fluid transversely, which could be exploited to accomplish fluid mixing between two neighbouring fluids in a microscale system. Herein we present a micromixer based on an asymmetrical ICEO flow induced above the herringbone floating electrode array surface. We investigate the average transverse ICEO slip velocity on the Ridge/Vee/herringbone floating electrode and find that the microvortex generated on the herringbone electrode surface has good potential for mixing the miscible liquids in microfluidic systems. In addition, we explore the effect of applied frequencies and bulk conductivity on the slip velocity above the herringbone floating electrode surface. The high dependence of mixing performance on the floating electrode pair numbers is analysed simultaneously. Finally, we investigate systematically voltage intensity, applied frequencies, inlet fluid velocity and liquid conductivity on the mixing performance of the proposed device. The microfluidic micromixer put forward herein offers great opportunity for fluid mixing in the field of micro total analysis systems.

Editorial for the Special Issue on Micro/Nano-Chip Electrokinetics, Volume II

n/a

On the Bipolar DC Flow Field-Effect-Transistor for Multifunctional Sample Handing in Microfluidics: A Theoretical Analysis under the Debye⁻Huckel Limit

We present herein a novel method of bipolar field-effect control on DC electroosmosis (DCEO) from a physical point of view, in the context of an intelligent and robust operation tool for stratified laminar streams in microscale systems. In this unique design of the DC flow field-effect-transistor (DC-FFET), a pair of face-to-face external gate terminals are imposed with opposite gate-voltage polarities. Diffuse-charge dynamics induces heteropolar Debye screening charge within the diffuse double layer adjacent to the face-to-face oppositely-polarized gates, respectively. A background electric field is applied across the source-drain terminal and forces the face-to-face counterionic charge of reversed polarities into induced-charge electroosmotic (ICEO) vortex flow in the lateral direction. The chaotic turbulence of the transverse ICEO whirlpool interacts actively with the conventional plug flow of DCEO, giving rise to twisted streamlines for simultaneous DCEO pumping and ICEO mixing of fluid samples along the channel length direction. A mathematical model in thin-layer approximation and the low-voltage limit is subsequently established to test the feasibility of the bipolar DC-FFET configuration in electrokinetic manipulation of fluids at the micrometer dimension. According to our simulation analysis, an integrated device design with two sets of side-by-side, but upside-down gate electrode pair exhibits outstanding performance in electroconvective pumping and mixing even without any externally-applied pressure difference. Moreover, a paradigm of a microdevice for fully electrokinetics-driven analyte treatment is established with an array of reversed bipolar gate-terminal pairs arranged on top of the dielectric membrane along the channel length direction, from which we can obtain almost a perfect liquid mixture by using a smaller magnitude of gate voltages for causing less detrimental effects at a small Dukhin number. Sustained by theoretical analysis, our physical demonstration on bipolar field-effect flow control for the microfluidic device of dual functionalities in simultaneous electroconvective pumping and mixing holds great potential in the development of fully-automated liquid-phase actuators in modern microfluidic systems.