Optimization of Micropump Performance Utilizing a Single Membrane with an Active Check Valve

Chitosan-Based Polymer Nanocomposites for Environmental Remediation of Mercury Pollution

Mercury is a well-known heavy metal pollutant of global importance, typically found in effluents (lakes, oceans, and sewage) and released into the atmosphere. It is highly toxic to humans, animals and plants. Therefore, the current challenge is to develop efficient materials and techniques that can be used to remediate mercury pollution in water and the atmosphere, even in low concentrations. The paper aims to review the chitosan-based polymer nanocomposite materials that have been used for the environmental remediation of mercury pollution since they possess multifunctional properties, beneficial for the adsorption of various kinds of pollutants from wastewater and the atmosphere. In addition, these chitosan-based polymer nanocomposites are made of non-toxic materials that are environmentally friendly, highly porous, biocompatible, biodegradable, and recyclable; they have a high number of surface active sites, are earth-abundant, have minimal surface defects, and are metal-free. Advances in the modification of the chitosan, mainly with nanomaterials such as multi-walled carbon nanotube and nanoparticles (Ag, TiO₂, S, and ZnO), and its use for mercury uptake by batch adsorption and passive sampler methods are discussed.

Piezoelectric micropump with integrated elastomeric check valves: design, performance characterization and primary application for 3D cell culture

This paper reports on the study of a piezoelectric actuated micropump with integrated elastomeric check valves that can transport small amounts of fluid in a highly controllable manner. The proposed micropump consists of a piezoelectric actuated fluid chamber with two integrated elastomeric check valves for regulating input and output flow direction, while restricting backflows. The actuation, fluid dynamic response and fluid-structure interactions at various working cycles are studied through a fully coupled multiphysics simulation (solid mechanics, electrostatic and fluid flow). The pump bodies are manufactured by micromachining of PMMA sheets, while the middle elastomeric membrane and diaphragm are fabricated by spin-coating PDMS. The experimental results confirm that the micropump can provide sufficiently low-velocity outflow for biomedical applications between 3.4 - 41.8 µl/min. The performance of the micropump is improved significantly through a convenient geometric modification of an off-the-shelf piezoelectric brass disc. Furthermore, the combination of this micropump with the 3D cell-culture microfluidic chip realizes the dynamic culture of cells encapsulated in 3D hydrogels with a continuous flowing medium, which offers the potential for changing the traditional mode of 3D cell culture with a static supply of nutrition and factors.

Characterization of a Droplet Containing the Clustered Magnetic Beads Manipulation by Magnetically Actuated Chips

A magnetically actuated chip was successfully developed in this study to perform the purpose of transportation for a droplet containing clustered magnetic beads. The magnetic field gradient is generated by the chip of the two-layer 4 × 4 array micro-coils, which was commercially fabricated by printing circuit board (PCB) technology. A numerical model was first established to investigate the magnetic field and thermal field for such a micro-coil. Consequently, the numerical simulations were in reasonable agreement with the experimental results. Moreover, a theoretical analysis was derived to predict the dynamic behaviors of the droplets. This analysis will offer the optimal operation for such a magnetically actuated chip. This study aims to successfully implement the concept of "digital microfluidics" in "point-of-care testing" (POCT). In the future, the micro-coil chip will be of substantial benefit to genetic analysis and infectious disease detection.

Microelectromechanical Systems (MEMS) for Biomedical Applications

The significant advancements within the electronics miniaturization field have shifted the scientific interest towards a new class of precision devices, namely microelectromechanical systems (MEMS). Specifically, MEMS refers to microscaled precision devices generally produced through micromachining techniques that combine mechanical and electrical components for fulfilling tasks normally carried out by macroscopic systems. Although their presence is found throughout all the aspects of daily life, recent years have witnessed countless research works involving the application of MEMS within the biomedical field, especially in drug synthesis and delivery, microsurgery, microtherapy, diagnostics and prevention, artificial organs, genome synthesis and sequencing, and cell manipulation and characterization. Their tremendous potential resides in the advantages offered by their reduced size, including ease of integration, lightweight, low power consumption, high resonance frequency, the possibility of integration with electrical or electronic circuits, reduced fabrication costs due to high mass production, and high accuracy, sensitivity, and throughput. In this context, this paper aims to provide an overview of MEMS technology by describing the main materials and fabrication techniques for manufacturing purposes and their most common biomedical applications, which have evolved in the past years.

Design and Fabrication of Pneumatically Actuated Valveless Pumps

In this study, a valveless pump was successfully designed and fabricated for the purpose of medium transportation. Different from traditional pumps, the newly designed pump utilizes an actuated or a deflected membrane, and it serves as the function of a check valve at the same time. For achieving the valveless property, an inlet or outlet port positioned in an upper- or lower-layer thin membrane was designed to be connected to an entrance or exit channel. Theoretical analysis and numerical simulation were conducted simultaneously to investigate the large deformation characteristics of the membranes and to determine the proper location of the inlet or outlet port on the proposed pump. Then, the valveless pump was fabricated on the basis of the proposed design. In the experiment, the maximum flow rate of the proposed pump exceeded 12.47 mL/min at a driving frequency of 5.0 Hz and driving pressure of 68.95 kPa.

Comparison of Swing and Tilting Check Valves Flowing Compressible Fluids

Although check valves have attracted a lot of attention, work has rarely been completed done when there is a compressible working fluid. In this paper, the swing check valve and the tilting check valve flowing high-temperature compressible water vapor are compared. The maximum Mach number under small valve openings, the dynamic opening time, and the hydrodynamic moment acting on the valve disc are chosen to evaluate the difference between the two types of check valves. Results show that the maximum Mach number increases with the decrease in the valve opening and the increase in the mass flow rate, and the Mach number and the pressure difference in the tilting check valve are higher. In the swing check valve, the hydrodynamic moment is higher and the valve opening time is shorter. Furthermore, the valve disc is more stable for the swing check valve, and there is a periodical oscillation of the valve disc in the tilting check valve under a small mass flow rate.