Biocidal Effectiveness of Selected Disinfectants Solutions Based on Water and Ozonated Water against Listeria monocytogenes Strains

A Meta-Analysis and Systematic Review of Listeria monocytogenes Response to Sanitizer Treatments

Listeria monocytogenes is a ubiquitous organism that can be found in food-related environments, and sanitizers commonly prevent and control it. The aim of this study is to perform a meta-analysis of L. monocytogenes response to sanitizer treatments. According to the principle of systematic review, we extracted 896 records on the mean log-reduction of L. monocytogenes from 84 publications as the dataset for this study. We applied a mixed-effects model to describe L. monocytogenes response to sanitizer treatment by considering sanitizer type, matrix type, biofilm status, sanitizer concentration, treatment time, and temperature. Based on the established model, we compared the response of L. monocytogenes under different hypothetical conditions using forest plots. The results showed that environmental factors (i.e., sanitizer concentration, temperature, and treatment time) affected the average log-reduction of L. monocytogenes (p < 0.05). L. monocytogenes generally exhibited strong resistance to citric acid and sodium hypochlorite but had low resistance to electrolyzed water. The planktonic cells of L. monocytogenes were less resistant to peracetic acid and sodium hypochlorite than the adherent and biofilm cells. Additionally, the physical and chemical properties of the contaminated or inoculated matrix or surface also influenced the sanitizer effectiveness. This review may contribute to increasing our knowledge of L. monocytogenes resistance to sanitizers and raising awareness of appropriate safety precautions.

Disinfectants against SARS-CoV-2: A Review

The pandemic due to Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has emerged as a serious global public health issue. Besides the high transmission rate from individual to individual, indirect transmission from inanimate objects or surfaces poses a more significant threat. Since the start of the outbreak, the importance of respiratory protection, social distancing, and chemical disinfection to prevent the spread of the virus has been the prime focus for infection control. Health regulatory organizations have produced guidelines for the formulation and application of chemical disinfectants to manufacturing industries and the public. On the other hand, extensive literature on the virucidal efficacy testing of microbicides for SARS-CoV-2 has been published over the past year and a half. This review summarizes the studies on the most common chemical disinfectants and their virucidal efficacy against SARS-CoV-2, including the type and concentration of the chemical disinfectant, the formulation, the presence of excipients, the exposure time, and other critical factors that determine the effectiveness of chemical disinfectants. In this review, we also critically appraise these disinfectants and conduct a discussion on the role they can play in the COVID-19 pandemic.

Comparison of Selected Phenotypic Features of Persistent and Sporadic Strains of Listeria monocytogenes Sampled from Fish Processing Plants

(1) Background: The main source of transmission of Listeria monocytogenes is contaminated food, e.g., fish and meat products and raw fruit and vegetables. The bacteria can remain for 13 years on machines in food processing plants, including fish plants. (2) Methods: A total of 720 swabs were collected from a salmon filleting line. The research material consisted of 62 (8.6%) L. monocytogenes isolates. Pulsed Field Gel Electrophoresis (PFGE) allowed detecting a pool of persistent strains. All persistent strains (n = 6) and a parallel group of strains collected sporadically (n = 6) were characterized by their ability to invade HT-29 cells, biofilm formation ability, and minimum bactericidal concentrations (MBC) of selected disinfectants. (3) Results: Among the obtained isolates, 38 genetically different strains were found, including 6 (15.8%) persistent strains. The serogroup 1/2a-3a represented 28 strains (73.7%), including the persistent ones. There were no significant differences in invasiveness between the persistent and sporadic strains. The persistent strains tolerated higher concentrations of the tested disinfectants, except for iodine-based compounds. The persistent strains initiated the biofilm formation process faster and formed it more intensively. (4) Conclusions: The presence of persistent strains in the food processing environment is a great challenge for producers to ensure consumer safety. This study attempts to elucidate the phenotypic characteristics of persistent L. monocytogenes strains.

Biocide Use in the Antimicrobial Era: A Review

Biocides are widely used in healthcare and industry to control infections and microbial contamination. Ineffectual disinfection of surfaces and inappropriate use of biocides can result in the survival of microorganisms such as bacteria and viruses on inanimate surfaces, often contributing to the transmission of infectious agents. Biocidal disinfectants employ varying modes of action to kill microorganisms, ranging from oxidization to solubilizing lipids. This review considers the main biocides used within healthcare and industry environments and highlights their modes of action, efficacy and relevance to disinfection of pathogenic bacteria. This information is vital for rational use and development of biocides in an era where microorganisms are becoming resistant to chemical antimicrobial agents.

Tolerance of Listeria monocytogenes to biocides used in food processing environments

Listeria monocytogenes is a foodborne pathogen that causes a life-threatening disease in humans known as listeriosis. Contamination of food during processing is the main route of transmission of Listeria monocytogenes. Therefore, biocides play a crucial role in food processing environments as they act as the first line of defense in the prevention and control of L. monocytogenes. Residues of biocides may be present at sublethal concentrations after disinfection. This, unfortunately, subjects L. monocytogenes to selection pressure, giving rise to tolerant strains, which pose a threat to food safety and public health. This review will give a brief description of L. monocytogenes, the clinical manifestation, treatment of listeriosis as well as recently recorded outbreaks. The article will then discuss the current literature on the ability of L. monocytogenes strains to tolerate biocides especially quaternary ammonium compounds as well as the mechanisms of tolerance towards biocides including the activation of efflux pump systems.

Impact of a Combination of UV-C Irradiation and Peracetic Acid Spray Treatment on Brochothrix thermosphacta and Yersinia enterocolitica Contaminated Pork

Efficient ways of decontamination are needed to minimize the risk of infections with Yersinia (Y.) enterocolitica, which causes gastrointestinal diseases in humans, and to reduce the numbers of Brochothrix (B.) thermosphacta to extend the shelf-life of meat. While many studies have focused on a single treatment of peracetic acid (PAA) or UV-C-irradiation, there are no studies about a combined treatment on meat. Therefore, in the present study, pork was inoculated with either Y. enterocolitica or B. thermosphacta, and was treated with a combination of 2040 mJ/cm² UV-C irradiation followed by a 2000 ppm PAA spray treatment (30 s). Samples were packed under modified atmosphere and stored for 1, 7, or 14 days. The samples were examined for Y. enterocolitica and B. thermosphacta content, chemical and sensory effects, and meat quality parameters. For Y. enterocolitica, a significant reduction of up to 2.16 log₁₀ cfu/cm² meat and for B. thermosphacta, up to 2.37 log₁₀ cfu/cm² meat was seen on day 14 after UV-C/PAA treatment compared to the untreated controls.

Inactivation of Salmonella Typhimurium by Non-Thermal Plasma Bubbles: Exploring the Key Reactive Species and the Influence of Organic Matter

The key reactive species generated by non-thermal plasma bubbles for the inactivation of Salmonella Typhimurium and the effects of organic matter on the inactivation efficacy were investigated. Plasma, which is primarily composed of ozone (O₃), was generated by dielectric barrier discharge and injected into a solution (400 mL) as a bubble. The surviving population of S. Typhimurium decreased in proportion to the treatment time, resulting in a 5.29 log reduction after 5 min of treatment. Verification tests to specify key reactive species were conducted using an O₃ destruction unit and reactive oxygen species scavengers. The results indicated that singlet oxygen (¹O₂) contributes substantially to the inactivation of S. Typhimurium, and that the presence of superoxide anion radicals (O₂^·−) from O₃ is essential for the production of ¹O₂. When a S. Typhimurium suspension containing organic matter (final concentration: 0, 0.005, 0.05, 0.1, and 0.5 g/L), consisting of beef extract and peptone, was treated with plasma bubbles for 5, 10, 15, 20, 25, and 30 min, respectively, the potential of the plasma bubbles for inactivating S. Typhimurium successfully was verified with longer contact time, despite organic matter attenuating the inactivation efficiency in a dose-dependent manner.

Examining the efficacy of mushroom industry biocides on Listeria monocytogenes biofilm

AIMS

The aim of this study was to test the efficacy of new and currently used biocides in the mushroom industry for inactivating Listeria monocytogenes biofilm.

METHODS AND RESULTS

A laboratory-scale study was initially carried out to test the efficacy of eleven biocidal products against a cocktail of five L. monocytogenes strains that were grown to 3-day biofilms on stainless steel coupons. Biocidal efficacy was then tested under clean and dirty conditions based on the EN 13697:2015 method. The results for the biocides tested ranged between 1·7-log and 6-log reduction of biofilm, with only the efficacy of the sodium hypochlorite-based biocide being significantly reduced in dirty conditions. A pilot-scale trial was then carried out on a subset of biocides against L. monocytogenes on concrete floors in a mushroom growing room and it was found that biocide efficacy in laboratory-scale did not translate well in pilot-scale.

CONCLUSIONS

Biocides that are used in the mushroom industry and potential alternative biocides were determined to be effective against L. monocytogenes biofilm in both laboratory-scale and pilot-scale experiments.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study has direct impact for the industry as it provides information on the efficacy of currently used biocides and other biocidal products against L. monocytogenes, an added benefit to their primary use.