The Response to Oxidative Stress in Listeria monocytogenes Is Temperature Dependent

A novel metagenomic approach uncovers phage genes as markers for increased disinfectant tolerance in mixed Listeria monocytogenes communities

Listeria monocytogenes is an important human pathogen with a high mortality rate. Consumption of contaminated ready-to-eat food is the main mode of transmission to humans. Disinfectant-tolerant L. monocytogenes have emerged, which are believed to have increased persistence potential. Elucidating the mechanisms of L. monocytogenes disinfectant tolerance has been the focus of previous studies using pure cultures. A limitation of such approach is the difficulty to identify strains with reduced susceptibility due to inter-strain variation and the need to screen large numbers of strains and genes. In this study, we applied a novel metagenomic approach to detect genes associated with disinfectant tolerance in mixed L. monocytogenes planktonic communities. Two communities, consisting of 71 and 80 isolates each, were treated with the food industry disinfectants benzalkonium chloride (BC, 1.75 mg/L) or peracetic acid (PAA, 38 mg/L). The communities were subjected to metagenomic sequencing and differences in individual gene abundances between biocide-free control communities and biocide-treated communities were determined. A significant increase in the abundance of Listeria phage-associated genes was observed in both communities after treatment, suggesting that prophage carriage could lead to an increased disinfectant tolerance in mixed L. monocytogenes planktonic communities. In contrast, a significant decrease in the abundance of a high-copy emrC-harbouring plasmid pLmN12-0935 was observed in both communities after treatment. In PAA-treated community, a putative ABC transporter previously found to be necessary for L. monocytogenes resistance to antimicrobial agents and virulence, was among the genes with the highest weight for differentiating treated from control samples. The undertaken metagenomic approach in this study can be applied to identify genes associated with increased tolerance to other antimicrobials in mixed bacterial communities.

Persistence of microbiological hazards in food and feed production and processing environments

Listeria monocytogenes (in the meat, fish and seafood, dairy and fruit and vegetable sectors), Salmonella enterica (in the feed, meat, egg and low moisture food sectors) and Cronobacter sakazakii (in the low moisture food sector) were identified as the bacterial food safety hazards most relevant to public health that are associated with persistence in the food and feed processing environment (FFPE). There is a wide range of subtypes of these hazards involved in persistence in the FFPE. While some specific subtypes are more commonly reported as persistent, it is currently not possible to identify universal markers (i.e. genetic determinants) for this trait. Common risk factors for persistence in the FFPE are inadequate zoning and hygiene barriers; lack of hygienic design of equipment and machines; and inadequate cleaning and disinfection. A well-designed environmental sampling and testing programme is the most effective strategy to identify contamination sources and detect potentially persistent hazards. The establishment of hygienic barriers and measures within the food safety management system, during implementation of hazard analysis and critical control points, is key to prevent and/or control bacterial persistence in the FFPE. Once persistence is suspected in a plant, a 'seek-and-destroy' approach is frequently recommended, including intensified monitoring, the introduction of control measures and the continuation of the intensified monitoring. Successful actions triggered by persistence of L. monocytogenes are described, as well as interventions with direct bactericidal activity. These interventions could be efficient if properly validated, correctly applied and verified under industrial conditions. Perspectives are provided for performing a risk assessment for relevant combinations of hazard and food sector to assess the relative public health risk that can be associated with persistence, based on bottom-up and top-down approaches. Knowledge gaps related to bacterial food safety hazards associated with persistence in the FFPE and priorities for future research are provided.

Environmental persistence of Listeria monocytogenes and its implications in dairy processing plants

Listeriosis, an invasive illness with a fatality rate between 20% and 30%, is caused by the ubiquitous bacterium Listeria monocytogenes. Human listeriosis has long been associated with foods. This is because the ubiquitous nature of the bacteria renders it a common food contaminant, posing a significant risk to the food processing sector. Although several sophisticated stress coping mechanisms have been identified as significant contributing factors toward the pathogen's persistence, a complete understanding of the mechanisms underlying persistence across various strains remains limited. Moreover, aside from genetic aspects that promote the ability to cope with stress, various environmental factors that exist in food manufacturing plants could also contribute to the persistence of the pathogen. The objective of this review is to provide insight into the challenges faced by the dairy industry because of the pathogens' environmental persistence. Additionally, it also aims to emphasize the diverse adaptation and response mechanisms utilized by L. monocytogenes in food manufacturing plants to evade environmental stressors. The persistence of L. monocytogenes in the food processing environment poses a serious threat to food safety and public health. The emergence of areas with high levels of L. monocytogenes contamination could facilitate Listeria transmission through aerosols, potentially leading to the recontamination of food, particularly from floors and drains, when sanitation is implemented alongside product manufacturing. Hence, to produce safe dairy products and reduce the frequency of outbreaks of listeriosis, it is crucial to understand the factors that contribute to the persistence of this pathogen and to implement efficient control strategies.

Genomic and pathogenicity islands of Listeria monocytogenes-overview of selected aspects

Listeria monocytogenes causes listeriosis, a disease characterized by a high mortality rate (up to 30%). Since the pathogen is highly tolerant to changing conditions (high and low temperature, wide pH range, low availability of nutrients), it is widespread in the environment, e.g., water, soil, or food. L. monocytogenes possess a number of genes that determine its high virulence potential, i.e., genes involved in the intracellular cycle (e.g., prfA, hly, plcA, plcB, inlA, inlB), response to stress conditions (e.g., sigB, gadA, caspD, clpB, lmo1138), biofilm formation (e.g., agr, luxS), or resistance to disinfectants (e.g., emrELm, bcrABC, mdrL). Some genes are organized into genomic and pathogenicity islands. The islands LIPI-1 and LIPI-3 contain genes related to the infectious life cycle and survival in the food processing environment, while LGI-1 and LGI-2 potentially ensure survival and durability in the production environment. Researchers constantly have been searching for new genes determining the virulence of L. monocytogenes. Understanding the virulence potential of L. monocytogenes is an important element of public health protection, as highly pathogenic strains may be associated with outbreaks and the severity of listeriosis. This review summarizes the selected aspects of L. monocytogenes genomic and pathogenicity islands, and the importance of whole genome sequencing for epidemiological purposes.

Stress Adaptation Responses of a Listeria monocytogenes 1/2a Strain via Proteome Profiling

Listeria monocytogenes is a foodborne pathogen that is ubiquitous and largely distributed in food manufacturing environments. It is responsible for listeriosis, a disease that can lead to significant morbidity and fatality in immunocompromised patients, pregnant women, and newborns. Few reports have been published about proteome adaptation when L. monocytogenes is cultivated in stress conditions. In this study, we applied one-dimensional electrophoresis and 2D-PAGE combined with tandem mass spectrometry to evaluate proteome profiling in the following conditions: mild acid, low temperature, and high NaCl concentration. The total proteome was analyzed, also considering the case of normal growth-supporting conditions. A total of 1,160 proteins were identified and those related to pathogenesis and stress response pathways were analyzed. The proteins involved in the expression of virulent pathways when L. monocytogenes ST7 strain was grown under different stress conditions were described. Certain proteins, particularly those involved in the pathogenesis pathway, such as Listeriolysin regulatory protein and Internalin A, were only found when the strain was grown under specific stress conditions. Studying how L. monocytogenes adapts to stress can help to control its growth in food, reducing the risk for consumers.

Frozen Vegetable Processing Plants Can Harbour Diverse Listeria monocytogenes Populations: Identification of Critical Operations by WGS

Frozen vegetables have emerged as a concern due to their association with foodborne outbreaks such as the multi-country outbreak of Listeria monocytogenes serogroup IVb linked to frozen corn. The capacity of L. monocytogenes to colonize food-processing environments is well-known, making the bacteria a real problem for consumers. However, the significance of the processing environment in the contamination of frozen foods is not well established. This study aimed to identify potential contamination niches of L. monocytogenes in a frozen processing plant and characterize the recovered isolates. A frozen vegetable processing plant was monitored before cleaning activities. A total of 78 points were sampled, including frozen vegetables. Environmental samples belonged to food-contact surfaces (FCS); and non-food-contact surfaces (n-FCS). Positive L. monocytogenes samples were found in FCS (n = 4), n-FCS (n = 9), and the final product (n = 1). A whole-genome sequencing (WGS) analysis revealed two clusters belonging to serotypes 1/2a-3a and 1/2b-3b). The genetic characterization revealed the presence of four different sequence types previously detected in the food industry. The isolate obtained from the final product was the same as one isolate found in n-FCS. A multi-virulence-locus sequence typing (MVLST) analysis showed four different virulence types (VT). The results obtained highlight the relevant role that n-FCS such as floors and drains can play in spreading L. monocytogenes contamination to the final product.

The Special Issue: Transmission and Detection of Food and Environmental Pathogens

To progress towards a full comprehension of the risk caused by pathogenic microorganisms transmitted via food and environmental routes, extensive information on the prevalence, the mechanisms of contamination, and the survival of pathogens is required, particularly to assist with the development of effective systems to reduce contamination, and to formulate procedural control measures, such as the implementation of food safety criteria [...].

In vitro virulence potential, surface attachment and transcriptional response of sublethally injured Listeria monocytogenes following exposure to peracetic acid

The disinfectant Peracetic acid (PAA) can cause high levels of sublethal injury to L. monocytogenes. This study aims to evaluate phenotypic and transcriptional characteristics concerning surface attachment and virulence potential of sublethally injured L. monocytogenes ScottA and EGDe after exposure to 0.75 ppm PAA for 90 min at 4°C and subsequent incubation in TSBY at 4°C. Results showed that injured L. monocytogenes cells (99% of total population) were able to attach (after 2 and 24h) on stainless steel coupons at 4°C and 20°C. In vitro virulence assays using human intestinal epithelial Caco-2 cells showed that injured L. monocytogenes could invade host cells but could not proliferate intracellularly. In vitro virulence response was strain-dependent; injured ScottA was more invasive than EGDe. Assessment of PAA-injury at the transcriptional level showed upregulation of genes (motB, flaA) involved in flagellum motility and surface attachment. The transcriptional response of L. monocytogenes EGDe and ScottA was different; only injured ScottA demonstrated upregulation of the virulence genes inlA and plcA. Downregulation of the stress-related genes fri and kat, and upregulation of lmo0669 was observed in injured ScottA. The obtained results indicate that sublethally-injured L. monocytogenes cells may retain part of their virulence properties as well as their ability to adhere on food processing surfaces. Transmission to food products and introduction of these cells in the food chain is therefore a plausible scenario that is worth taking into consideration in terms of risk assessment. Importance L. monocytogenes is the causative agent of listeriosis a serious food-borne illness. Antimicrobial practices, such as disinfectants used for the elimination of this pathogen in food industry can produce a sublethally injured population fraction. Injured cells of this pathogen, that may survive an antimicrobial treatment, may pose a food safety-risk. Nevertheless, knowledge regarding how sublethal injury may impact important cellular traits and phenotypic responses of this pathogen is limited. This work suggests that sublethally injured L. monocytogenes cells maintain the virulence and surface attachment potential and highlights the importance of the occurrence of sublethally injured cells regarding food safety.

Master regulator NtrC controls the utilization of alternative nitrogen sources in Pseudomonas stutzeri A1501

Pseudomonas stutzeri A1501 is a model strain used to study associative nitrogen fixation, and it possesses the nitrogen regulatory NtrC protein in the core genome. Nitrogen sources represent one of the important factors affecting the efficiency of biological nitrogen fixation in the natural environment. However, the regulation of NtrC during nitrogen metabolism in P. stutzeri A1501 has not been clarified. In this work, a phenotypic analysis of the ntrC mutant characterized the roles of NtrC in nitrogen metabolism and the oxidative stress response of P. stutzeri A1501. To systematically identify NtrC-controlled gene expression, RNA-seq was performed to further analyse the gene expression differences between the wild-type strain and the ∆ntrC mutant under nitrogen fixation conditions. A total of 1431 genes were found to be significantly altered by ntrC deletion, among which 147 associative genes had NtrC-binding sites, and the pathways for nitrogen fixation regulation, nitrogenous compound acquisition and catabolism and nitrate assimilation were discussed. Furthermore, the oxidative stress-related gene (katB), which was upregulated by ntrC deletion, was suggested to be a potential target gene of NtrC, thus highlighting the importance of NtrC in nitrogenase protection against oxygen damage. Based on these findings, we propose that NtrC is a high-ranking element in the regulatory network of P. stutzeri A1501 that controls a variety of nitrogen metabolic and oxidative stress responsive traits required for adaptation to complex rhizosphere environments.

Adaptive Response of Listeria monocytogenes to the Stress Factors in the Food Processing Environment

Listeria monocytogenes are Gram-positive, facultatively anaerobic, non-spore-forming bacteria that easily adapt to changing environmental conditions. The ability to grow at a wide range of temperatures, pH, and salinity determines the presence of the pathogen in water, sewage, soil, decaying vegetation, and animal feed. L. monocytogenes is an etiological factor of listeriosis, especially dangerous for the elderly, pregnant women, and newborns. The major source of L. monocytogenes for humans is food, including fresh and smoked products. Its high prevalence in food is associated with bacterial adaptation to the food processing environment (FPE). Since the number of listeriosis cases has been progressively increasing an efficient eradication of the pathogen from the FPE is crucial. Understanding the mechanisms of bacterial adaptation to environmental stress will significantly contribute to developing novel, effective methods of controlling L. monocytogenes in the food industry.

Antibiofilm Effects of Nanoparticles and Visible Light Illumination Against Listeria monocytogenes

Listeria monocytogenes bacteria pose a particular risk to the food industry as the species is known to form biofilm and to survive in a wide range of challenging environmental conditions. L. monocytogenes can cause listeriosis, a serious food-borne disease, and effective and safe antibiofilm materials and sanitary methods for food processing environments are intensively sought. A variety of nanoparticle materials have been recognized as safe to use in food environments, which allows the application of nanomaterials also for food safety purposes. Nanoparticles together with light illumination generate reactive oxygen species which inactivate bacteria by breaking down cell membranes, proteins, and DNA. The main objective of this study was to evaluate the efficacy of nanomaterials and blue light illumination for L. monocytogenes ATCC 7644 biofilm inactivation. Biofilm was allowed to form for 72 h on nanocoated stainless steel and aluminum plates, after which the plates were illuminated. Non-coated control plates were used to evaluate the antibiofilm efficacy of nanocoating. Plate count method was used to evaluate bacteria counts after illumination. Nanocoating did not affect initial biofilm formation compared to the control plates. Biofilm was significantly (p < 0.05) reduced on stainless steel, aluminum, and TiO₂-coated aluminum plates after 72-h illumination by 1.9, 3.2, and 5.9 log, respectively. Nanocoating with visible light illumination could be an effective and safe method for enhancing food safety in food processing facilities to control biofilm formation. Evidence of antibiofilm properties of nanomaterials together with visible light illumination is limited; hence, future studies with variable light intensities and nanomaterials are needed.

Characterisation of Listeria monocytogenes food-associated isolates to assess environmental fitness and virulence potential

The ability of Listeria monocytogenes isolates to survive within the food production environment (FPE), as well as virulence, varies greatly between strains. There are specific genetic determinants that have been identified which can strongly influence a strains ability to survive in the FPE and/or within human hosts. In this study, we assessed the FPE fitness and virulence potential, including efficacy of selected hygiene or treatment intervention, against 52 L. monocytogenes strains isolated from various food and food environment sources. Phenotypic tests were performed to determine the minimum inhibitory concentration of cadmium chloride and benzalkonium chloride and the sensitivities to five clinically relevant antibiotics. A genomic analysis was also performed to identify resistance genes correlating to the observed phenotypic resistance profiles, along with genetic determinants of interest which may elude to the FPE fitness and virulence potential. A transposon element containing a novel cadmium resistance gene, cadA7, a Tn916 variant insert in the hypervariable Listeria genomic island 1 region and an LGI2 variant were identified. Resistance to cadmium and disinfectants was prevalent among isolates in this study, although no resistance to clinically important antimicrobials was observed. Potential hypervirulent strains containing full length inlA, LIPI-1 and LIPI-3 were also identified in this study. Cumulatively, the results of this study show a vast array of FPE survival and pathogenicity potential among food production-associated isolates, which may be of concern for food processing operators and clinicians regarding L. monocytogenes strains colonising and persisting within the FPE, and subsequently contaminating food products then causing disease in at risk population groups.

Nitrite reduction in fermented meat products and its impact on aroma

Fermented meat products are important not only for their sensory characteristics, nutrient content and cultural heritage, but also for their stability and convenience. The aroma of fermented meat products is unique and its formation mechanisms are not completely understood; however, the presence of nitrite and nitrate is essential for the development of cured aroma. The use of nitrite and nitrate as curing agents in meat products is based on its preservation activity. Even though their presence has been associated with several risks due to the formation of nitrosamines, their use is guarantee due to their antimicrobial action against Clostridium botulinum. Recent trends and recommendations by international associations are directed to use nitrite but at the minimum concentration necessary to provide the antimicrobial activity against Clostridium botulinum. This chapter discuss the actual limits of nitrite and nitrite content and their role as curing agents in meat products with special impact on dry fermented products. Regulatory considerations, antimicrobial mechanisms and actual trends regarding nitrite reduction and its effect on sensory and aroma properties are also considered.