A Selection of Platforms to Evaluate Surface Adhesion and Biofilm Formation in Controlled Hydrodynamic Conditions

The Impact of Fluid Flow on Microbial Growth and Distribution in Food Processing Systems

This article examines the impact of fluid flow dynamics on microbial growth, distribution, and control within food processing systems. Fluid flows, specifically laminar and turbulent flows, significantly influence microbial behaviors, such as biofilm development and microbial adhesion. Laminar flow is highly conducive to biofilm formation and microbial attachment because the flow is smooth and steady. This smooth flow makes it much more difficult to sterilize the surface. Turbulent flow, however, due to its chaotic motion and the shear forces that are present, inhibits microbial growth because it disrupts attachment; however, it also has the potential to contaminate surfaces by dispersing microorganisms. Computational fluid dynamics (CFD) is highlighted as an essential component for food processors to predict fluid movement and enhance numerous fluid-dependent operations, including mixing, cooling, spray drying, and heat transfer. This analysis underscores the significance of fluid dynamics in controlling microbial hazards in food settings, and it discusses some interventions, such as antimicrobial surface treatments and properly designed equipment. Each process step from mixing to cooling, which influences heat transfer and microbial control by ensuring uniform heat distribution and optimizing heat removal, presents unique fluid flow requirements affecting microbial distribution, biofilm formation, and contamination control. Food processors can improve microbial management and enhance product safety by adjusting flow rates, types, and equipment configurations. This article helps provide an understanding of fluid-microbe interactions and offers actionable insights to advance food processing practices, ensuring higher standards of food safety and quality control.

Understanding the Influence of Rheology on Biofilm Adhesion and Implication for Food Safety

Understanding biofilm rheology is crucial for industrial and domestic food safety practices. This comprehensive review addresses the knowledge gap on the rheology of biofilm. Specifically, the review explores the influence of fluid flow, shear stress, and substrate properties on the initiation, structure, and functionality of biofilms, as essential implications for food safety. The viscosity and shear-thinning characteristics of non-Newtonian fluids may impact the attachment and detachment dynamics of biofilms, influencing their stability and resilience under different flow conditions. The discussion spans multiple facets, including the role of extracellular polymeric substances (EPSs) in biofilm formation, the impact of rheological attributes of biofilm on their adhesion to surfaces, and the influence of shear forces between biofilms and substrate's surface characteristics on biofilm stability. Analytical techniques, encompassing rheometry, microscopy, and molecular biology approaches, are scrutinized for their contributions to understanding these interactions. The paper delves into the implications for the food industry, highlighting potential risks associated with biofilm formation and proposing strategies for effective control and prevention. Future research directions and the integration of rheological considerations into food safety regulations are underscored as pivotal steps in mitigating biofilm-related risks. The synthesis of microbiology, materials science, and engineering perspectives offers a multidimensional exploration of rheology-biofilm interactions, laying the groundwork for informed interventions in diverse industrial settings.

Electrochemical biosensors on microfluidic chips as promising tools to study microbial biofilms: a review

Microbial biofilms play a pivotal role in microbial infections and antibiotic resistance due to their unique properties, driving the urgent need for advanced methodologies to study their behavior comprehensively across varied environmental contexts. While electrochemical biosensors have demonstrated success in understanding the dynamics of biofilms, scientists are now synergistically merging these biosensors with microfluidic technology. This combined approach offers heightened precision, sensitivity, and real-time monitoring capabilities, promising a more comprehensive understanding of biofilm behavior and its implications. Our review delves into recent advancements in electrochemical biosensors on microfluidic chips, specifically tailored for investigating biofilm dynamics, virulence, and properties. Through a critical examination of these advantages, properties and applications of these devices, the review highlights the transformative potential of this technology in advancing our understanding of microbial biofilms in different settings.

Using Bio-inline Reactor to Evaluate Sanitizer Efficacy in Removing Dual-species Biofilms Formed by Escherichia coli O157:H7 and Listeria monocytogenes

The efficacy of a sanitizer in biofilm removal may be influenced by a combination of factors such as sanitizer exposure time and concentration, bacterial species, surface topography, and shear stresses. We employed an inline biofilm reactor to investigate the interactions of these variables on biofilm removal with chlorine. The CDC bioreactor was used to grow E. coli O157:H7 and L. monocytogenes biofilms as a single species or with Ralstonia insidiosa as a dual-species biofilm on stainless steel, PTFE, and EPDM coupons at shear stresses 0.368 and 2.462 N/m2 for 48 hours. Coupons were retrieved from a CDC bioreactor and placed in an inline biofilm reactor and 100, 200, or 500 ppm of chlorine was supplied for 1- and 4 min. Bacterial populations in the biofilms were quantified pre- and posttreatment by plating on selective media. After chlorine treatment, reduction (Log CFU/cm2) in pathogen populations obtained from three replicates was analyzed for statistical significance. A 1-min chlorine treatment (500 ppm), on dual-species E. coli O157:H7 biofilms grown at high shear stress of 2.462 N/m2 resulted in significant E. coli O157:H7 reductions on SS 316L (2.79 log CFU/cm2) and PTFE (1.76 log CFU/cm2). Similar trend was also observed for biofilm removal after a 4-min chlorine treatment. Single species E. coli O157:H7 biofilms exhibited higher resistance to chlorine when biofilms were developed at high shear stress. The effect of chlorine in L. monocytogenes removal from dual-species biofilms was dependent primarily on the shear stress at which they were formed rather than the surface topography of materials. Besides surface topography, shear stresses at which biofilms were formed also influenced the effect of sanitizer. The removal of E. coli O157:H7 biofilms from EPDM material may require critical interventions due to difficulty in removing this pathogen. The inline biofilm reactor is a novel tool to evaluate the efficacy of a sanitizer in bacterial biofilm removal.

Understanding the flow behavior around marine biofilms

In vitro platforms capable of mimicking the hydrodynamic conditions prevailing in natural aquatic environments have been previously validated and used to predict the fouling behavior on different surfaces. Computational Fluid Dynamics (CFD) has been used to predict the shear forces occurring in these platforms. In general, these predictions are made for the initial stages of biofilm formation, where the amount of biofilm does not affect the flow behavior, enabling the estimation of the shear forces that initial adhering organisms have to withstand. In this work, we go a step further in understanding the flow behavior when a mature biofilm is present in such platforms to better understand the shear rate distribution affecting marine biofilms. Using 3D images obtained by Optical Coherence Tomography, a mesh was produced and used in CFD simulations. Biofilms of two different marine cyanobacteria were developed in agitated microtiter plates incubated at two different shaking frequencies for 7 weeks. The biofilm-flow interactions were characterized in terms of the velocity field and shear rate distribution. Results show that global hydrodynamics imposed by the different shaking frequencies affect biofilm architecture and also that this architecture affects local hydrodynamics, causing a large heterogeneity in the shear rate field. Biofilm cells located in the streamers of the biofilm are subjected to much higher shear values than those located on the bottom of the streamers and this dispersion in shear rate values increases at lower bulk fluid velocities. This heterogeneity in the shear force field may be a contributing factor for the heterogeneous behavior in metabolic activity, growth status, gene expression pattern, and antibiotic resistance often associated with nutrient availability within the biofilm.

Nanomedicine against biofilm infections: A roadmap of challenges and limitations

Microbial biofilms are complex three-dimensional structures where sessile microbes are embedded in a polymeric extracellular matrix. Their resistance toward the host immune system as well as to a diverse range of antimicrobial treatments poses a serious health and development threat, being in the top 10 global public health threats declared by the World Health Organization. In an effort to combat biofilm-related microbial infections, several strategies have been developed to independently eliminate biofilms or to complement conventional antibiotic therapies. However, their limitations leave room for other treatment alternatives, where the application of nanotechnology to biofilm eradication has gained significant relevance in recent years. Their small size, penetration efficiency, and the design flexibility that they present makes them a promising alternative for biofilm infection treatment, although they also present set-backs. This review aims to describe the main possibilities and limitations of nanomedicine against biofilms, while covering the main aspects of biofilm formation and study, and the current therapies for biofilm treatment. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

Impact of hydrodynamics on community structure and metabolic production of marine biofouling formed in a highly energetic estuary

Biofouling is a specific lifestyle including both marine prokaryotic and eukaryotic communities. Hydrodynamics are poorly studied parameters affecting biofouling formation. This study aimed to investigate how water dynamics in the Etel Estuary (Northwest Atlantic coasts of France) influences the colonization of artificial substrates. Hydrodynamic conditions, mainly identified as shear stress, were characterized by measuring current velocity, turbulence intensity and energy using Acoustic Doppler Current Profiler (ADCP). One-month biofouling was analyzed by coupling metabarcoding (16S rRNA, 18S rRNA and COI genes), untargeted metabolomics (liquid chromatography coupled with high-resolution mass spectrometry, LC-HRMS) and characterization of the main biochemical components of the microbial exopolymeric matrix. A higher richness was observed for biofouling communities (prokaryotes and eukaryotes) exposed to the strongest currents. Ectopleura (Cnidaria) and its putative symbionts Endozoicomonas (Gammaproteobacteria) were dominant in the less dynamic conditions. Eukaryotes assemblages were specifically shaped by shear stress, leading to drastic changes in metabolite profiles. Under high hydrodynamic conditions, the exopolymeric matrix increased and was composed of 6 times more polysaccharides than proteins, these latter playing a crucial role in the adhesion and cohesion properties of biofilms. This original multidisciplinary approach demonstrated the importance of shear stress on both the structure of marine biofouling and the metabolic response of these complex communities.

Challenges and current advances in in vitro biofilm characterization

Biofilms are structured communities of bacterial cells encased in a self-produced polymeric matrix, which develop over time and exhibit temporal responses to stimuli from internal biological processes or external environmental changes. They can be detrimental, threatening public health and causing economic loss, while they also play beneficial roles in ecosystem health, biotechnology processes, and industrial settings. Biofilms express extreme heterogeneity in their physical properties and structural composition, resulting in critical challenges in understanding them comprehensively. The lack of detailed knowledge of biofilms and their phenotypes has deterred significant progress in developing strategies to control their negative impacts and take advantage of their beneficial applications. A range of in vitro models and characterization tools have been developed and used to study biofilm growth and, specifically, to investigate the impact of environmental and growth factors on their development. This review article discusses the existing knowledge of biofilm properties and explains how external factors, such as flow condition, surface, interface, and host factor, may impact biofilm growth. The limitations of current tools, techniques, and in vitro models that are currently used for biofilms are also presented.

An overview of various methods for in vitro biofilm formation: a review

Biofilms are widely present in the natural environment and are difficult to remove as they are a survival strategy of microorganisms. Thus, the importance of studying biofilms is being increasingly recognized in food, medical, dental, and water quality-related industries. While research on biofilm detection methods is actively progressing, research on biofilm formation is not progressing rapidly. Moreover, there are few standardized methods because biofilm formation is affected by various factors. However, comprehensive knowledge of biofilm formation is essential to select a suitable method for research purposes. To better understand the various in vitro biofilm formation methods, the principles and characteristics of each method are explained in this review by dividing the methods into static and dynamic systems. In addition, the applications of biofilm research based on various assays are also discussed.

Keep It Simple: Improving the Ex Situ Culture of Cystoseira s.l. to Restore Macroalgal Forests

Brown algae from genus Cystoseira s.l. form dense underwater forests that represent the most productive areas in the Mediterranean Sea. Due to the combined effects of global and local stressors such as climate change, urbanization, and herbivore outbreaks, there has been a severe decline in brown algal forests in the Mediterranean Sea. Natural recovery of depleted sites is unlikely due to the low dispersal capacity of these species, and efficient techniques to restore such habitats are needed. In this context, the aims of our study were (1) to improve and simplify the current ex situ laboratory protocol for the cultivation of Gongolaria barbata by testing the feasibility of some cost-effective and time-efficient techniques on two donor sites of G. barbata and (2) to evaluate the survival and growth of young thalli during the laboratory phase and during the most critical five months after out-planting. Specifically, the following ex situ cultivation methods were tested: (A) cultivation on clay tiles in mesocosms with culture water prepared by three different procedures (a) filtered seawater with a 0.22 μm filter membrane, (b) filtered seawater with a 0.7 μm filter membrane (GF), and (c) UV-sterilized water, and (B) cultivation on clay tiles in open laboratory systems. After two weeks, all thalli were fixed to plastic lantern net baskets suspended at a depth of 2 m in the coastal sea (hybrid method), and the algal success was monitored in relation to the different donor sites and cultivation protocol. The satisfactory results of this study indicate that UV-sterilized water is suitable for the cultivation of G. barbata in mesocosm, which significantly reduces the cost of the laboratory phase. This opens the possibility of numerous and frequent algal cultures during the reproductive period of the species. Additionally, if the young thalli remain in the lantern net baskets for an extended period of several months, they can grow significantly in the marine environment without being exposed to pressure from herbivorous fish.

Development of Antifouling Strategies for Marine Applications

Marine biofouling is an undeniable challenge for aquatic systems since it is responsible for several environmental and ecological problems and economic losses. Several strategies have been developed to mitigate fouling-related issues in marine environments, including developing marine coatings using nanotechnology and biomimetic models, and incorporating natural compounds, peptides, bacteriophages, or specific enzymes on surfaces. The advantages and limitations of these strategies are discussed in this review, and the development of novel surfaces and coatings is highlighted. The performance of these novel antibiofilm coatings is currently tested by in vitro experiments, which should try to mimic real conditions in the best way, and/or by in situ tests through the immersion of surfaces in marine environments. Both forms present their advantages and limitations, and these factors should be considered when the performance of a novel marine coating requires evaluation and validation. Despite all the advances and improvements against marine biofouling, progress toward an ideal operational strategy has been slow given the increasingly demanding regulatory requirements. Recent developments in self-polishing copolymers and fouling-release coatings have yielded promising results which set the basis for the development of more efficient and eco-friendly antifouling strategies.

The effects of flow field on the succession of the microbial community on artificial reefs

The flow field is one of the most important external conditions affecting the development of biofouling community on artificial reefs (ARs), especially the microbial community. In this article, we investigated the temporal dynamics of microbial communities between the stoss side and the lee side of ARs. The results showed that the composition and structure of microbial and macrobenthic communities between the stoss side and the lee side both presented obvious temporal variations. Microbial diversity and richness were higher on the stoss side than that on the lee side. There was a greater impact on bacterial and archaeal communities on temporal scale compared to that on micro-spatial scale, which was not suitable for the fungal community. The organism biomass, abundance and coverage of macrobenthic community on the lee side were higher than those on the stoss side, and the microbial diversity on the stoss side increased significantly with the organism coverage.

Easy, Flexible and Standardizable Anti-Nascent Biofilm Activity Assay to Assess Implant Materials

Medical implants have improved the quality of life of many patients. However, surgical intervention may eventually lead to implant microbial contamination. The aims of this research were to develop an easy, robust, quantitative assay to assess surface antimicrobial activities, especially the anti-nascent biofilm activity, and to identify control surfaces, allowing for international comparisons. Using new antimicrobial assays to assess the inhibition of nascent biofilm during persistent contact or after transient contact with bacteria, we show that the 5 cent Euro coin or other metal-based antibacterial coins can be used as positive controls, as more than 4 log reduction on bacterial survival was observed when using either S. aureus or P. aeruginosa as targets. The methods and controls described here could be useful to develop an easy, flexible and standardizable assay to assess relevant antimicrobial activities of new implant materials developed by industries and academics.

Advances on Bacterial and Fungal Biofilms for the Production of Added-Value Compounds

Simple Summary

The production of bio-based materials, including organic acids, antibiotics, enzymes, ethanol, and hydrogen, is generally done by the cultivation of suspended cells rather than using immobilized cells. However, several studies suggest the application of productive biofilms as a reliable alternative for biocatalysis, with many advantages over suspended-growth systems. This review gives an overview of the breakthrough in the application of biofilm platforms for the sustainable production of valuable compounds, with particular insight into the latest advances in the production of recombinant proteins. Productive biofilms are shown to improve production rates and product yields, demonstrating great potential for industrial applications.

Abstract

In recent years, abundant research has been performed on biofilms for the production of compounds with biotechnological and industrial relevance. The use of biofilm platforms has been seen as a compelling approach to producing fine and bulk chemicals such as organic acids, alcohols, and solvents. However, the production of recombinant proteins using this system is still scarce. Biofilm reactors are known to have higher biomass density, operational stability, and potential for long-term operation than suspended cell reactors. In addition, there is an increasing demand to harness industrial and agricultural wastes and biorefinery residues to improve process sustainability and reduce production costs. The synthesis of recombinant proteins and other high-value compounds is mainly achieved using suspended cultures of bacteria, yeasts, and fungi. This review discusses the use of biofilm reactors for the production of recombinant proteins and other added-value compounds using bacteria and fungi.

Polymeric Coatings and Antimicrobial Peptides as Efficient Systems for Treating Implantable Medical Devices Associated-Infections

Many infections are associated with the use of implantable medical devices. The excessive utilization of antibiotic treatment has resulted in the development of antimicrobial resistance. Consequently, scientists have recently focused on conceiving new ways for treating infections with a longer duration of action and minimum environmental toxicity. One approach in infection control is based on the development of antimicrobial coatings based on polymers and antimicrobial peptides, also termed as “natural antibiotics”.

Biofilm Formation of Helicobacter pylori in Both Static and Microfluidic Conditions Is Associated With Resistance to Clarithromycin

It is widely accepted that production of biofilm is a protective mechanism against various type of stressors, including exposure to antibiotics. However, the impact of this structure on the spread of antibiotic resistance in Helicobacter pylori is still poorly understood. Therefore, the aim of the current research was to determine the relationship between biofilm formation and antibiotic resistance of H. pylori. The study was carried out on 24 clinical strains with different resistance profiles (antibiotic-sensitive, mono-resistant, double-resistant and multidrug-resistant) against clarithromycin (CLR), metronidazole (MTZ) and levofloxacin (LEV). Using static conditions and a crystal violet staining method, a strong correlation was observed between biofilm formation and resistance to CLR but not MTZ or LEV. Based on the obtained results, three the strongest and three the weakest biofilm producers were selected and directed for a set of microfluidic experiments performed in the Bioflux system combined with fluorescence microscopy. Under continuous flow conditions, it was observed that strong biofilm producers formed twice as much of biofilm and created significantly more eDNA and in particular proteins within the biofilm matrix when compared to weak biofilm producers. Additionally, it was noticed that strong biofilm producers had higher tendency for autoaggregation and presented morphostructural differences (a greater cellular packing, shorter cells and a higher amount of both OMVs and flagella) in relation to weak biofilm counterparts. In conclusion, resistance to CLR in clinical H. pylori strains was associated with a broad array of phenotypical features translating to the ability of strong biofilm formation.

Formation, Development, and Cross-Species Interactions in Biofilms

Biofilms, which are essential vectors of bacterial survival, protect microbes from antibiotics and host immune attack and are one of the leading causes that maintain drug-resistant chronic infections. In nature, compared with monomicrobial biofilms, polymicrobial biofilms composed of multispecies bacteria predominate, which means that it is significant to explore the interactions between microorganisms from different kingdoms, species, and strains. Cross-microbial interactions exist during biofilm development, either synergistically or antagonistically. Although research into cross-species biofilms remains at an early stage, in this review, the important mechanisms that are involved in biofilm formation are delineated. Then, recent studies that investigated cross-species cooperation or synergy, competition or antagonism in biofilms, and various components that mediate those interactions will be elaborated. To determine approaches that minimize the harmful effects of biofilms, it is important to understand the interactions between microbial species. The knowledge gained from these investigations has the potential to guide studies into microbial sociality in natural settings and to help in the design of new medicines and therapies to treat bacterial infections.

Advanced understanding of prokaryotic biofilm formation using a cost-effective and versatile multi-panel adhesion (mPAD) mount

Most microorganisms exist in biofilms, which comprise aggregates of cells surrounded by an extracellular matrix that provides protection from external stresses. Based on the conditions under which they form, biofilm structures vary in significant ways. For instance, biofilms that develop when microbes are incubated under static conditions differ from those formed when microbes encounter the shear forces of a flowing liquid. Moreover, biofilms develop dynamically over time. Here, we describe a cost-effective, 3D-printed coverslip holder that facilitates surface adhesion assays under a broad range of standing and shaking culture conditions. This multi-panel adhesion (mPAD) mount further allows cultures to be sampled at multiple time points, ensuring consistency and comparability between samples and enabling analyses of the dynamics of biofilm formation. As a proof of principle, using the mPAD mount for shaking, oxic cultures, we confirm previous flow chamber experiments showing that Pseudomonas aeruginosa wild type and a phenazine deletion mutant (Δ phz ) form biofilms with similar structure but reduced density in the mutant strain. Extending this analysis to anoxic conditions, we reveal that microcolony and biofilm formation can only be observed under shaking conditions and are decreased in the Δ phz mutant compared to wild-type cultures, indicating that phenazines are crucial for the formation of biofilms if oxygen as an electron acceptor is unavailable. Furthermore, while the model archaeon Haloferax volcanii does not require archaella for surface attachment under static conditions, we demonstrate that H. volcanii mutants that lack archaella are impaired in early stages of biofilm formation under shaking conditions.

Importance:

Due to the versatility of the mPAD mount, we anticipate that it will aid the analysis of biofilm formation in a broad range of bacteria and archaea. Thereby, it contributes to answering critical biological questions about the regulatory and structural components of biofilm formation and understanding this process in a wide array of environmental, biotechnological, and medical contexts.