Assessment of Pre-Treatment Techniques for Coarse Printed Circuit Boards (PCBs) Recycling

A Review on Tetrabromobisphenol A: Human Biomonitoring, Toxicity, Detection and Treatment in the Environment

Tetrabromobisphenol A (TBBPA) is a known endocrine disruptor employed in a range of consumer products and has been predominantly found in different environments through industrial processes and in human samples. In this review, we aimed to summarize published scientific evidence on human biomonitoring, toxic effects and mode of action of TBBPA in humans. Interestingly, an overview of various pretreatment methods, emerging detection methods, and treatment methods was elucidated. Studies on exposure routes in humans, a combination of detection methods, adsorbent-based treatments and degradation of TBBPA are in the preliminary phase and have several limitations. Therefore, in-depth studies on these subjects should be considered to enhance the accurate body load of non-invasive matrix, external exposure levels, optimal design of combined detection techniques, and degrading technology of TBBPA. Overall, this review will improve the scientific comprehension of TBBPA in humans as well as the environment, and the breakthrough for treating waste products containing TBBPA.

Potential and current practices of recycling waste printed circuit boards: A review of the recent progress in pyrometallurgy

Over the last few decades, a substantial amount of e-waste including waste printed circuit boards (WPCBs) has been produced and is accumulating worldwide. More recently, the rate of production has increased significantly, and this trend has raised some serious concerns regarding the need to develop viable recycling methods. The presence of other materials in the WPCBs, such as ceramics and polymers, and the multi-metal nature of WPCBs all contribute to the increased complexity of any recycling process. Among the viable techniques, pyrometallurgy, with the inherent ability to process the waste independent of its composition, is a promising candidate for both rapid and large-scale treatment. In the present study, firstly, the principles of the pyrometallurgical methods for WPCB recycling are discussed. Secondly, the different unit operations of thermochemical pretreatment including incineration, pyrolysis, and molten salt processing are reviewed. Thirdly, the smelting processes for the recovery of metals from WPCBs, as well as the issues surrounding slag formation and subsequent treatment are explained. Fourthly, alternative methods for the recovery of polymers and ceramics, in addition to metal recycling, are elucidated. Fifthly, emission control techniques and the potential for energy recovery are evaluated.

Gravity and Electrostatic Separation for Recovering Metals from Obsolete Printed Circuit Board

This study proposed an evaluation of enrichment processes of obsolete Printed Circuit Boards (PCBs), by means of gravity and electrostatic separation, aiming at the recovery of metals. PCBs are the most important component in electronic devices, having high concentrations of metals and offering a secondary source of raw materials. Its recycling promotes the reduction in the environmental impacts associated with its production, use, and disposal. The recovery method studied started with the dismantling of the PCB, followed by a comminution and granulometric classification. Subsequent magnetic, gravity, and electrostatic separations were performed. After the separations, a macroscopic visual evaluation and chemical analysis were carried out, determining the metal content in the concentrate products. The results obtained from gravity separation showed a product with metallic concentrations of 89% and 76% for particle sizes of 0.3−0.6 mm and 0.6−1.18 mm, respectively. In electrostatic separation, the product obtained was 88% for the lower particle size (<0.3 mm) and 62% for particles sizes >1.18 mm.