Adsorption Kinetics of Imidacloprid, Acetamiprid and Methomyl Pesticides in Aqueous Solution onto Eucalyptus Woodchip Derived Biochar

Recent advances and prospects of neonicotinoid insecticides removal from aquatic environments using biochar: Adsorption and degradation mechanisms

In recent years, neonicotinoid insecticides (NNIs), representing a new era of pest control, have increasingly replaced traditional classes such as organophosphorus compounds, carbamates, and pyrethroids due to their precise targeting and broad-spectrum efficacy. However, the high water solubility of NNIs has led to their pervasion in aquatic ecosystems, raising concerns about potential risks to non-target organisms and human health. Therefore, there is an urgent need for research on remediating NNI contamination in aquatic environments. This study demonstrates that biochar, characterized by its extensive surface area, intricate pore structure, and high degree of aromaticity holds significant promise for removing NNIs from water. The highest reported adsorption capacity of biochar for NNIs stands at 738.0 mg·g-1 with degradation efficiencies reaching up to 100.0 %. This review unveils that the interaction mechanisms between biochar and NNIs primarily involve π-π interactions, electrostatic interactions, pore filling, and hydrogen bonding. Additionally, biochar facilitates various degradation pathways including Fenton reactions, photocatalytic, persulfate oxidations, and biodegradation predominantly through radical (such as SO4-, OH, and O2-) as well as non-radical (such as 1O2 and electrons transfer) processes. This study emphasizes the dynamics of interaction between biochar surfaces and NNIs during adsorption and degradation aiming to elucidate mechanistic pathways involved as well as assess the overall efficacy of biochar in NNI removal. By comparing the identification of degradation products and degradation pathways, the necessity of advanced oxidation process is confirmed. This review highlights the significance of harnessing biochar's potential for mitigating NNI pollution through future application-oriented research and development endeavors, while simultaneously ensuring environmental integrity and promoting sustainable practices.

A critical review on biochar for the removal of toxic pollutants from water environment

As an effort to tackle some of the most pressing ecological issues we are currently experiencing, there has been an increasing interest in employing biomass-derived char products in various disciplines. Thermal combustion of biomass results in biochar production, which is a remarkably rich source of carbon. Not only does the biochar obtained by the thermochemical breakdown of biomass lower the quantity of carbon released into the environment, but it also serves as an eco-friendly substitute for activated carbon (AC) and further carbon-containing products. An overview of using biochar to remove toxic pollutants is the main subject of this article. Several techniques for producing biochar have been explored. The most popular processes for producing biochar are hydrothermal carbonization, gasification and pyrolysis. Carbonaceous materials, alkali, acid and steam are all capable of altering biochar. Depending on the environmental domains of applications, several modification techniques are chosen. The current findings on characterization and potential applications of biochar are compiled in this survey. Comprehensive discussion is given on the fundamentals regarding the formation of biochar. Process variables influencing the yield of biochar have been summarized. Several biochars' adsorption capabilities for expulsion pollutants under various operating circumstances are compiled. In the domain of developing biochar, a few suggestions for future study have been given.

Low-cost materials as vehicles for pesticides in aquatic media: a review of the current status of different biosorbents employed, optimization by RSM approach

Water contamination by pesticides is increasing dramatically due to population growth and the extensive use of pesticides in agriculture, leading to grave environmental and health concerns. Thus, efficient processes and the design and development of effective treatment technologies are required due to the enormous demand for fresh water. The adsorption approach has been widely used to remove organic contaminants such as pesticides because of its performance, less expense, high selectivity, and simplicity of operation compared to other treatment technologies. Among alternative adsorbents, biomaterials abundantly available for pesticide sorption from water resources have attracted the attention of researchers worldwide. The main objective of this review article is to (i) present studies on a wide range of raw or chemically modified biomaterials potentially effective in removing pesticides from aqueous media; (ii) indicating the effectiveness of biosorbents as green and low-cost materials for removing pesticides from wastewater; and (iii) furthermore, report the application of response surface methodology (RSM) for modeling and optimizing adsorption.

Taguchi optimisation of the synthesis of vine-pruning-waste hydrochar as potential adsorbent for pesticides in water

This research aimed to synthesise an effective hydrochar adsorbent from vineyard pruning wastes to remove emerging contaminants as a potential valorisation product. The adsorption capacity of the hydrochar was optimised using the Taguchi method. Four synthesis variables were evaluated: hydrothermal reaction temperature, use of H3PO4 as a catalyst, number of acetone washes, and type of chemical cold activation. The simultaneous adsorption of five model pesticides (clothianidin (CTD), acetamiprid (ACE), 2,4-D, metalaxyl (MET), and atrazine (ATZ)) at an initial pH of 7 was studied. At optimum conditions, the hydrochar presented a total adsorption capacity of 22.7 μmol/g, representing a 2.7-fold improvement with respect to pristine hydrochar performance. High percentage removals were achieved for all pollutants (85 % CTD, 94 % ACE, 86 % MET, and 95 % ATZ) except for 2,4-D (4 %). This research provides a valuable reference for developing hydrochar adsorbents for pollution control and the valorisation of biomass wastes.

Integrated Electrochemical Oxidation and Biodegradation for Remediation of a Neonicotinoid Insecticide Pollutant

A novel integrated electrochemical oxidation (EO) and bacterial degradation (BD) technique was employed for the remediation of the chloropyridinyl and chlorothiazolyl classes of neonicotinoid (NEO) insecticides in the environment. Imidacloprid (IM), clothianidin (CL), acetamiprid (AC), and thiamethoxam (TH) were chosen as the target NEOs. Pseudomonas oleovorans SA2, identified through 16S rRNA gene analysis, exhibited the potential for BD. In EO, for the selected NEOs, the total percentage of chemical oxygen demand (COD) was noted in a range of 58-69%, respectively. Subsequently, in the biodegradation of EO-treated NEOs (BEO) phase, a higher percentage (80%) of total organic carbon removal was achieved. The optimum concentration of NEOs was found to be 200 ppm (62%) for EO, while for BEO, the COD efficiency was increased up to 79%. Fourier-transform infrared spectroscopy confirms that the heterocyclic group and aromatic ring were degraded in the EO and further utilized by SA2. Gas chromatography-mass spectroscopy indicated up to 96% degradation of IM and other NEOs in BD (BEO) compared to that of EO (73%). New intermediate molecules such as silanediamine, 1,1-dimethyl-n,n'-diphenyl produced during the EO process served as carbon sources for bacterial growth and further mineralized. As a result, BEO enhanced the removal of NEOs with a higher efficiency of COD and a lower consumption of energy. The removal efficiency of the NEOs by the integrated approach was achieved in the order of AC > CL > IM > TH. This synergistic EO and BD approach holds promise for the efficient detoxification of NEOs from polluted environments.

Nano/micro-cellulose-based materials as remarkable sorbents for the remediation of agricultural resources from chemical pollutants

Overusing pesticides, fertilizers, and synthetic dyes has significantly increased their presence in various parts of the environment. The transportation of these pollutants into agricultural soil and water through rivers, soils, and groundwater has seriously threatened human and ecosystem health. Applying techniques and materials to clean up agricultural sources from pesticides, heavy metals (HMs), and synthetic dyes (SDs) is one of the major challenges in this century. The sorption technique offers a viable solution to remediate these chemical pollutants (CHPs). Cellulose-based materials have become popular in nano and micro scales because they are widely available, safe to use, biodegradable, and have a significant ability to absorb substances. Nanoscale cellulose-based materials exhibit greater capacity in absorbing pollutants compared to their microscale counterparts because they possess a larger surface area. Many available hydroxyl groups (-OH) and chemical and physical modifications enable the incorporation of CHPs on to cellulose-based materials. Following this potential, this review aims to comprehensively summarize recent advancements in the field of nano- and micro-cellulose-based materials as effective adsorbents for CHPs, given the abundance of cellulosic waste materials from agricultural residues. The recent developments pertaining to the enhancement of the sorption capacity of cellulose-based materials against pesticides, HMs, and SDs, are deliberated.

Biochar Derived from Pineapple Leaf Non-Fibrous Materials and Its Adsorption Capability for Pesticides

Non-fibrous materials (NFMs) are typically discarded during pineapple leaf fiber processing. The underutilized NFM waste was proposed for use in this work as a raw material for the production of biochar . The removal of pesticides (acetamiprid, imidacloprid, or methomyl) from water was then investigated using the NFM derived biochar (NFMBC). The pseudo-second-order kinetic data suggested chemisorption of pesticide on NFMBC. While acetamiprid or imidacloprid adsorption on NFMBC occurred primarily via multi-layered adsorption (best fitted with the Freundlich isotherms), the Sips adsorption isotherms matched with the experimental data, implying heterogeneous adsorption of methomyl on the biochar surface. The adsorption capacities for acetamiprid, methomyl, and imidacloprid are 82.18, 36.16, and 28.98 mg g^-1, respectively, which are in agreement with the order of the polarity (low to high) of pesticides. Adsorption capacities indicated that the NFMBC preferably removed low-polarity pesticides from water sources. Since pineapple leaves provide fibers and NFMs for materials development, this study should promote an extended agro-waste utilization approach and full-cycle resource management in pineapple fields.

New Hybrid Adsorbents Based on Polyaniline and Polypyrrole with Silicon Dioxide: Synthesis, Characterization, Kinetics, Equilibrium, and Thermodynamic Studies for the Removal of 2,4-Dichlorophenol

In the current study, polyaniline and polypyrrole with silicon dioxide (PAni:PPy@SiO₂) were combined to formulate a new adsorbent, which was examined using XRD, TEM, SEM, FTIR, TGA, and BET, and the adsorption kinetics were investigated by UV-vis spectroscopy. The optical band gap was also evaluated. The electrochemical behavior was investigated using cyclic voltammograms. Moreover, experimental conditions were used to evaluate the 2,4-dichlorophenol (2,4-DCP) adsorption based on the pH, temperature, reaction time, and initial concentration. The analytical isotherm data were determined by Langmuir, Freundlich, Temkin, Sips, and Redlich-Peterson models. For the analysis of the kinetic data, the pseudo-first- and -second-order models and the intraparticle diffusion model were investigated. It was found that this new adsorbent possessed the highest adsorption efficiency after several regeneration cycles. Furthermore, the thermodynamic parameters of adsorption, such as entropy (ΔS), enthalpy (ΔH), and standard Gibbs were measured. These results suggest that the PAni:PPy backbone can generally be better applied for the elimination of 2,4-dichlorophenol by appropriately dispersing it over the surface of suitable SiO₂. This search provides a novel way to develop separable, high-performance adsorbents for adsorbing organic contamination from wastewater.

Graphene-magnetite functionalized diatomite for efficient removal of organochlorine pesticides from aquatic environment

A unique composite based on graphene oxide, magnetite, and diatomite was synthetized by eco-friendly dry coating technique for the removal of four toxic organochlorine pesticides from agricultural drainage. The prepared composite was fully characterized using X-ray fluorescence (XRF), X-ray diffraction (XRD), particle size analyzer, Vibrating-sample magnetometer (VSM), magnetic susceptibility meter, zeta potential, scanning electron microscopy-energy dispersive X-ray spectrometer (SEM-EDS), and Brunauer-Emmett-Teller analysis (BET) techniques. The characterization results confirmed the fabrication of a discrete core/shell structured composite possess both adsorptive and magnetic nature. The surface area, pore volume and pore diameter were 23.4 m²/g, 0.0026 cm³/g, and 4.5 nm, respectively. The amenability to use the fabricated composite as an adsorbent for some organochlorine pesticides was investigated under different conditions of concentration, time, pH, and temperature. Batch adsorption experiment showed that 97% removal efficiency was observed for all the studied pesticides with adsorption capacities of 7.78 mg/g after 2 h contact time and at any pH region. The adsorption was exothermic (ΔH < 0), spontaneous (ΔG° < 0), followed pseudo 2nd order kinetics (R² > 0.998), and fitted well to Langmuir's isotherm pattern for all pesticides (R² > 0.98). It is assumed that organochlorine pesticides were initially physisorbed by the graphene nanoplatelets via hydrophobic and π-π interactions along with chemisorption for forming monolayer. Moreover, the pesticides molecules could diffuse in the DMG composite micropores and be trapped in the structural defects. The regeneration of the composite exhibited over 90% removal efficiency even after seven cycles. The fabricated composite was examined to remove organochlorine from a real water sample, the obtained results suggest the possibility to use this composite as an economical, effective and sustainable adsorbent for the treatment of pesticides contaminating water.