Development of bioorthogonal reactions and their applications in bioconjugation

17β-estradiol biosensors based on different bioreceptors and their applications

17β-Estradiol (E2) is a critical sex steroid hormone, which has significant effects on the endocrine systems of both humans and animals. E2 is also believed to play neurotrophic and neuroprotective roles in the brain. Biosensors present a powerful tool to detect E2 because of their small, efficient, and flexible design. Furthermore, Biosensors can quickly and accurately obtain detection results with only a small sampling amount, which greatly meets the detection of the environment, food safety, medicine safety, and human body. This review focuses on previous studies of biosensors for detecting E2 and divides them into non-biometric sensors, enzyme biosensors, antibody biosensors, and aptamer biosensors according to different bioreceptors. The advantages, disadvantages, and design points of various bioreceptors for E2 detection are analyzed and summarized. Additionally, applications of different bioreceptors of E2 detection are presented and highlight the field of environmental monitoring, food and medicine safety, and disease detection in recent years. Finally, the development of E2 detection by biosensor is prospected.

Optomicrofluidic detection of cancer cells in peripheral blood via metabolic glycoengineering

The currently existing label-based techniques for the detection of circulating tumor cells (CTCs) target natural surface proteins of cells and are therefore applicable to only limited cancer cell types. We report optomicrofluidic detection of cancer cells in the pool of peripheral blood mononuclear cells (PBMCs) by exploiting the difference in their cell metabolism. We employ metabolic glycoengineering as a click chemistry tool for tagging cells that yields several fold-higher fluorescence signals from cancer cells compared to that from PBMCs. The effects of concentrations of the tagging compounds and cell incubation time on the fluorescence signal intensity are studied. The tagged cells were encapsulated in droplets ensuring that cells enter the detection region two-dimensionally focused in single-file and optically detected with a high detection efficiency and low coefficient of variation of the signals. The metabolic tagging approach showed a significantly higher tagging efficiency and average fluorescence signal compared to the well-established and widely adopted anti-EpCAM-FITC-based tagging. We demonstrated the detection of three different cancer cell lines - EpCAM-negative cervical cancer cell, HeLa, weakly EpCAM positive, and triple-negative breast cancer cell, MDA-MB-231, and strongly EpCAM positive breast cancer cell, MCF7, highlighting that the proposed technique is independent of naturally occurring cell surface proteins and widely applicable. The metabolically tagged and optically detected cells were successfully recultured, proving the compatibility of the proposed technique with downstream assays. The proposed technique is then utilised for the detection of CTCs in metastatic cancer patients' blood. The current work provides a new strategy for detecting cancer cells in the blood that can find potential applications in both fundamental research and clinical studies involving CTCs as well as in single-cell sequencing.

Selective bioorthogonal probe for N-glycan hybrid structures

Metabolic incorporation of chemically tagged monosaccharides is a facile means of labelling cellular glycoprotein and glycolipids. Yet, since the monosaccharide precursors are often shared by several pathways, selectivity has been difficult to attain. For example, N-linked glycosylation is a chemically complex, and ubiquitous post translational modification with three distinct classes of GlcNAc-containing N-glycan structures: oligomannose, hybrid, and complex. Here we describe synthesis of 1,3-Pr2-6-OTs GlcNAlk as a next generation metabolic chemical reporter (MCR) for the specific labeling of hybrid N-glycan structures. We first developed a general strategy for defining the selectivity of labelling with chemically tagged monosaccharides. We then applied this approach to establish that 1,3-Pr2-6-OTs GlcNAlk is specifically incorporated into hybrid N-glycans. Using this MCR as a detection tool, we carried out imaging experiments to define the intracellular localization and trafficking of target proteins bearing hybrid N-glycan structures.

Exploring the versatility of pentafulvene–maleimide cycloaddition as a ligation strategy: buffer and pH effects

Pentafulvene–maleimide cycloadditions proceed efficiently in a range of biological buffers of varying pH, highlighting the potential of this strategy as an efficient ligation strategy for the preparation of conjugates.

IEDDA: An Attractive Bioorthogonal Reaction for Biomedical Applications

The pretargeting strategy has recently emerged in order to overcome the limitations of direct targeting, mainly in the field of radioimmunotherapy (RIT). This strategy is directly dependent on chemical reactions, namely bioorthogonal reactions, which have been developed for their ability to occur under physiological conditions. The Staudinger ligation, the copper catalyzed azide-alkyne cycloaddition (CuAAC) and the strain-promoted [3 + 2] azide–alkyne cycloaddition (SPAAC) were the first bioorthogonal reactions introduced in the literature. However, due to their incomplete biocompatibility and slow kinetics, the inverse-electron demand Diels-Alder (IEDDA) reaction was advanced in 2008 by Blackman et al. as an optimal bioorthogonal reaction. The IEDDA is the fastest bioorthogonal reaction known so far. Its biocompatibility and ideal kinetics are very appealing for pretargeting applications. The use of a trans-cyclooctene (TCO) and a tetrazine (Tz) in the reaction encouraged researchers to study them deeply. It was found that both reagents are sensitive to acidic or basic conditions. Furthermore, TCO is photosensitive and can be isomerized to its cis-conformation via a radical catalyzed reaction. Unfortunately, the cis-conformer is significantly less reactive toward tetrazine than the trans-conformation. Therefore, extensive research has been carried out to optimize both click reagents and to employ the IEDDA bioorthogonal reaction in biomedical applications.

In Situ Forming iEDDA Hydrogels with Tunable Gelation Time Release High-Molecular Weight Proteins in a Controlled Manner over an Extended Time

Off-target interactions between reactive hydrogel moieties and drug cargo as well as slow reaction kinetics and the absence of controlled protein release over an extended period of time are major drawbacks of chemically cross-linked hydrogels for biomedical applications. In this study, the inverse electron demand Diels-Alder (iEDDA) reaction between norbornene- and tetrazine-functionalized eight-armed poly(ethylene glycol) (PEG) macromonomers was used to overcome these obstacles. Oscillatory shear experiments revealed that the gel point of a 15% (w/v) eight-armed PEG hydrogel with a molecular weight of 10 kDa was less than 15 s, suggesting the potential for fast in situ gelation. However, the high-speed reaction kinetics result in a risk of premature gel formation that complicates the injection process. Therefore, we investigated the effect of polymer concentration, temperature, and chemical structure on the gelation time. The cross-linking reaction was further characterized regarding bioorthogonality. Only 11% of the model protein lysozyme was found to be PEGylated by the iEDDA reaction, whereas 51% interacted with the classical Diels-Alder reaction. After determination of the mesh size, fluorescein isothiocyanate-dextran was used to examine the release behavior of the hydrogels. When glucose oxidase was embedded into 15% (w/v) hydrogels, a controlled release over more than 250 days was achieved. Overall, the PEG-based hydrogels cross-linked via the fast iEDDA reaction represent a promising material for the long-term administration of biologics.

Triazole-Modified Nucleic Acids for the Application in Bioorganic and Medicinal Chemistry

This review covers studies which exploit triazole-modified nucleic acids in the range of chemistry and biology to medicine. The 1,2,3-triazole unit, which is obtained via click chemistry approach, shows valuable and unique properties. For example, it does not occur in nature, constitutes an additional pharmacophore with attractive properties being resistant to hydrolysis and other reactions at physiological pH, exhibits biological activity (i.e., antibacterial, antitumor, and antiviral), and can be considered as a rigid mimetic of amide linkage. Herein, it is presented a whole area of useful artificial compounds, from the clickable monomers and dimers to modified oligonucleotides, in the field of nucleic acids sciences. Such modifications of internucleotide linkages are designed to increase the hybridization binding affinity toward native DNA or RNA, to enhance resistance to nucleases, and to improve ability to penetrate cell membranes. The insertion of an artificial backbone is used for understanding effects of chemically modified oligonucleotides, and their potential usefulness in therapeutic applications. We describe the state-of-the-art knowledge on their implications for synthetic genes and other large modified DNA and RNA constructs including non-coding RNAs.

Faster Surface Ligation Reactions Improve Immobilized Enzyme Structure and Activity

During integration into materials, the inactivation of enzymes as a result of their interaction with nanometer size denaturing "hotspots" on surfaces represents a critical challenge. This challenge, which has received far less attention than improving the long-term stability of enzymes, may be overcome by limiting the exploration of surfaces by enzymes. One way this may be accomplished is through increasing the rate constant of the surface ligation reaction and thus the probability of immobilization with reactive surface sites (i.e., ligation efficiency). Here, the connection between ligation reaction efficiency and the retention of enzyme structure and activity was investigated by leveraging the extremely fast reaction of strained trans-cyclooctene (sTCOs) and tetrazines (Tet). Remarkably, upon immobilization via Tet-sTCO chemistry, carbonic anhydrase (CA) retained 77% of its solution-phase activity, while immobilization via less efficient reaction chemistries, such as thiol-maleimide and azide-dibenzocyclooctyne, led to activity retention of only 46% and 27%, respectively. Dynamic single-molecule fluorescence tracking methods further revealed that longer surface search distances prior to immobilization (>0.5 μm) dramatically increased the probability of CA unfolding. Notably, the CA distance to immobilization was significantly reduced through the use of Tet-sTCO chemistry, which correlated with the increased retention of structure and activity of immobilized CA compared to the use of slower ligation chemistries. These findings provide an unprecedented insight into the role of ligation reaction efficiency in mediating the exploration of denaturing hotspots on surfaces by enzymes, which, in turn, may have major ramifications in the creation of functional biohybrid materials.

Bioorthogonal Labeling Reveals Different Expression of Glycans in Mouse Hippocampal Neuron Cultures during Their Development

The expression of different glycans at the cell surface dictates cell interactions with their environment and other cells, being crucial for the cell fate. The development of the central nervous system is associated with tremendous changes in the cell glycome that is tightly regulated. Herein, we have employed bioorthogonal Cu-free click chemistry to image temporal distribution of different glycans in live mouse hippocampal neurons during their maturation in vitro. We show development-dependent glycan patterns with increased fucose and decreased mannose expression at the end of the maturation process. We also demonstrate that this approach is biocompatible and does not affect glycan transport although it relies on an administration of modified glycans. The applicability of this strategy to tissue sections unlocks new opportunities to study the glycan dynamics under more complex physiological conditions.

Unravelling the strain-promoted [3+2] cycloaddition reactions of phenyl azide with cycloalkynes from the molecular electron density theory perspective

The increase of the strain not only increases the reaction rate and the exothermic character of these reactions, but also changes the mechanism for the small cycloalkynes from a non-polar to a polar reaction.

Bile Acid Binding Protein Functionalization Leads to a Fully Synthetic Rhodopsin Mimic

Rhodopsins are photoreceptive proteins using light to drive a plethora of biological functions such as vision, proton and ion pumping, cation and anion channeling, and gene and enzyme regulation. Here we combine organic synthesis, NMR structural studies, and photochemical characterization to show that it is possible to prepare a fully synthetic mimic of rhodopsin photoreceptors. More specifically, we conjugate a bile acid binding protein with a synthetic mimic of the rhodopsin protonated Schiff base chromophore to achieve a covalent complex featuring an unnatural protein host, photoswitch, and photoswitch-protein linkage with a reverse orientation. We show that, in spite of its molecular-level diversity, light irradiation of the prepared mimic fuels a photochromic cycle driven by sequential photochemical and thermal Z/E isomerizations reminiscent of the photocycles of microbial rhodopsins.

Dissociative Bioorthogonal Reactions

Bioorthogonal reactions that proceed readily under physiological conditions without interference from biomolecules have found widespread application in the life sciences. Complementary to the bioorthogonal reactions that ligate two molecules, reactions that release a molecule or cleave a linker are increasingly attracting interest. Such dissociative bioorthogonal reactions have a broad spectrum of uses, for example, in controlling bio-macromolecule activity, in drug delivery, and in diagnostic assays. This review article summarizes the developed bioorthogonal reactions linked to a release step, outlines representative areas of the applications of such reactions, and discusses aspects that require further improvement.

Polymeric Nanowires for Diagnostic Applications

Polymer nanowire-related research has shown considerable progress over the last decade. The wide variety of materials and the multitude of well-established chemical modifications have made polymer nanowires interesting as a functional part of a diagnostic biosensing device. This review provides an overview of relevant publications addressing the needs for a nanowire-based sensor for biomolecules. Working our way towards the detection methods itself, we review different nanowire fabrication methods and materials. Especially for an electrical signal read-out, the nanowire should persist in a single-wire configuration with well-defined positioning. Thus, the possibility of the alignment of nanowires is discussed. While some fabrication methods immanently yield an aligned single wire, other methods result in disordered structures and have to be manipulated into the desired configuration.

Phenanthridine-based nitrones as substrates for strain-promoted alkyne-nitrone cycloadditions

Over the past decade, bioorthogonal chemistry that facilitates the efficient conjugation of biomolecules has expanded from the copper-catalyzed alkyne-azide cycloadditions to a multitude of diverse reactions, varying additives and reactional partners, and most often offering better alternatives with faster rates and lower toxicity of employed reactants. Among these, the copper-free strain-promoted cycloaddition reactions have been demonstrated to be more promising, offering a reaction without toxic metal catalysts and with faster inherent kinetic rate constants. The strain-promoted alkyne-nitrone cycloadditions are easily tunable from both the (strained) alkyne and nitrone perspective, both compounds giving the opportunity to modulate the rate of reaction by substituting various positions. Previously, acyclic nitrones have been evaluated in the strain-promoted alkyne-nitrone reactions; however, they were notably prone to hydrolysis. Some five-membered ring endocyclic nitrones developed concomitantly offered the advantage of relatively fast kinetics and better resistance to degradation in aqueous conditions and have been successfully used for labelling of biomolecules in living systems. Herein, we have prepared and studied nitrones inspired by the phenanthridine scaffold that efficiently undergo strain-promoted alkyne-nitrone reactions. Phenanthridine nitrones react fast with strained cyclooctynes with large bimolecular rate constants while maintaining bioorthogonality and resistance to hydrolysis.

Amino-Acid-Catalyzed Direct Aldol Bioconjugation

A site-specific bioconjugation was developed based on direct aldol coupling using amino-acid-derived organocatalysts. The functionalization exhibits fast kinetics and occurs under mild, biocompatible conditions (viz., aqueous media, moderate temperature, and neutral pH). The resulting bioconjugates were found to be stable toward abundant aldolase enzymes, as well as acidic and basic pH. The methodology was demonstrated through conjugation of a variety of small molecules, dyes, and peptides to proteins, including a single-domain antibody, which was then used for cellular imaging.

Visualizing glycans on single cells and tissues-Visualizing glycans on single cells and tissues

Metabolic oligosaccharide engineering and chemoenzymatic glycan labeling have provided powerful tools to study glycans in living systems and tissue samples. In this review article, we summarize recent advances in this field with a focus on innovative approaches for glycan imaging. The presented applications demonstrate that several of the leading imaging methods, which have revolutionized quantitative cell biology, can be adapted to imaging glycans on single cells and tissues.

Bioconjugation and stabilisation of biomolecules in biosensors

Suitable bioconjugation strategies and stabilisation of biomolecules on electrodes is essential for the development of novel and commercially viable biosensors. In the present review, the functional groups that comprise the selectable targets for practical bioconjugation methods are discussed. We focus on describing the most common immobilisation techniques used in biosensor construction, which are classified into irreversible and reversible methods. Concerning the stability of proteins, the two main types of stability may be defined as (i) storage or shelf stability, and (ii) operational stability. Both types of stability are explained, as well as the introduction of an electrophoretic technique for predicting protein–polymer interactions. In addition, solution and dry stabilisation as well as stabilisation using the covalent immobilisation of proteins are discussed including possible factors that influence stability. Finally, the integration of nanomaterials, such as magnetic particles, with protein immobilisation is discussed in relation to protein stability studies.

Generation of therapeutic immunoconjugates via Residue-Specific Conjugation Technology (RESPECT) utilizing a native cysteine in the light chain framework of Oryctolagus cuniculus

The conjugation of toxins, dyes, peptides, or proteins to monoclonal antibodies is often performed via free thiol groups generated by either partial reduction methods or engineering free cysteine residues into the antibody sequence. Antibodies from the rabbit Oryctolagus cuniculus have an additional intrachain disulfide bond, whereby the light chain variable kappa domain is bridged to the constant kappa region between cysteine residues at positions 80 and 171, respectively. Chimerization of rabbit antibodies with human constant domains allows for the generation of a free thiol group at the light chain position 80 (C80) that can be used for site-specific conjugation. An efficient process for the purification and simultaneous removal of cysteinylation at the C80 site was developed. The unpaired C80 was shown to be efficiently conjugated using several different maleimido-based ligands. REsidue SPEcific Conjugation Technology (RESPECT) antibody-drug conjugates prepared using rabbit-human chimeric anti-human mesothelin rabbit antibodies and maleimido-PEG₂-auristatin conjugated to C80 were shown to be highly potent and specific in vitro and effective in vivo in reduction of tumor growth in a highly aggressive mesothelin-expressing xenograft tumor model.

Installing an additional emission quenching pathway in the design of iridium(III)-based phosphorogenic biomaterials for bioorthogonal labelling and imaging

We report the synthesis, characterization, photophysical and electrochemical behaviour and biological labelling applications of new phosphorogenic bioorthogonal probes derived from iridium(III) polypyridine complexes containing a 1,2,4,5-tetrazine moiety. In contrast to common luminescent cyclometallated iridium(III) polypyridine complexes, these tetrazine complexes are almost non-emissive due to effective Förster resonance energy transfer (FRET) and/or photoinduced electron transfer (PET) from the excited iridium(III) polypyridine unit to the appended tetrazine moiety. However, they exhibited significant emission enhancement upon reacting with (1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-ylmethanol (BCN-OH) (ca. 19.5-121.9 fold) and BCN-modified bovine serum albumin (BCN-BSA) (ca. 140.8-1133.7 fold) as a result of the conversion of the tetrazine unit to a non-quenching pyridazine derivative. The complexes were applied to image azide-modified glycans in live cells using a homobifunctional crosslinker, 1,13-bis((1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-ylmethyloxycarbonylamino)-4,7,10-trioxatridecane (bis-BCN).

Dual modification of biomolecules

With the advent of novel bioorthogonal reactions and "click" chemistry, an increasing number of strategies for the single labelling of proteins and oligonucleotides have emerged. Whilst several methods exist for the site-selective introduction of a single chemical moiety, site-selective and bioorthogonal dual modification of biomolecules remains a challenge. The introduction of multiple modules enables a plethora of permutations and combinations and can generate a variety of bioconjuguates with many potential applications. From de novo approaches on oligomers to the post-translational functionalisation of proteins, this review will highlight the main strategies to dually modify biomolecules.

Click Chemistry-Mediated Nanosensors for Biochemical Assays

Click chemistry combined with functional nanoparticles have drawn increasing attention in biochemical assays because they are promising in developing biosensors with effective signal transformation/amplification and straightforward signal readout for clinical diagnostic assays. In this review, we focus on the latest advances of biochemical assays based on Cu (I)-catalyzed 1, 3-dipolar cycloaddition of azides and alkynes (CuAAC)-mediated nanosensors, as well as the functionalization of nanoprobes based on click chemistry. Nanoprobes including gold nanoparticles, quantum dots, magnetic nanoparticles and carbon nanomaterials are covered. We discuss the advantages of click chemistry-mediated nanosensors for biochemical assays, and give perspectives on the development of click chemistry-mediated approaches for clinical diagnosis and other biomedical applications.

Fast and Tight Boronate Formation for Click Bioorthogonal Conjugation

A new click bioorthogonal reaction system was devised to enable the fast ligation (k(ON) ≈340 m(-1)  s(-1)) of conjugatable derivatives of a rigid cyclic diol (nopoldiol) and a carefully optimized boronic acid partner, 2-methyl-5-carboxymethylphenylboronic acid. Using NMR and fluorescence spectroscopy studies, the corresponding boronates were found to form reversibly within minutes at low micromolar concentration in water, providing submicromolar equilibrium constant (K(eq) ≈10(5) -10(6) m(-1)). Efficient protein conjugation under physiological conditions was demonstrated with model proteins thioredoxin and albumin, and characterized by mass spectrometry and gel electrophoresis.

Cyclopropenation of internal alkynylsilanes and diazoacetates catalyzed by copper(i) N-heterocyclic carbene complexes

Copper(i) N-heterocyclic carbene (CuNHC) complexes are effective catalysts for the cyclopropenation of internal alkynylsilanes and diazoacetates compounds.

Intriguing cellular processing of a fluorinated amino acid during protein biosynthesis in Escherichia coli

Unusual in vivo processing of a fluorinated amino acid provides unexpected dual protein labeling in E. coli.