Charge Transfer Enhancement in the D-π-A Type Porphyrin Dyes: A Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) Study

Efficient model photosensitizers based on metallocenyl complexes with thiophene-N = N-pyrimidine as π-conjugated bridge and cyanoacrylate as an anchoring group: a density functional theory study

Eight push-pull systems involving containing four transition metals (iron, ruthenium, cobalt, and nickel), metallocenes as donor groups, cyanoacrylate as electron attractor group, and thiophene-N = N- pyrimidine derivatives as π-conjugated bridges were designed and studied using DFT and TD-DFT methods involving B3LYP and CAM-B3LYP functionals combined with the cc-pVDZ/LANL2DZ basis sets. The main purpose of this work is to determine the effect of metallocene in improving the photosensitization property of such chromophores. This was done by calculating their light-harvesting efficiency LHE as well as other properties employed for DSSC application. The considered dyes were first studied in the gas phase, then in the presence of TiO₂ nanoparticles representing the semi-conductor, and finally in the presence of a specific implicit solvent. The presence of iron as metal involved in the metallocene group supplemented by extending the π-conjugated bridge by a cyanovinyl spacer was demonstrated so as to give the most optimal response taking into account the lower cost and toxicity as well as the friendliness to the environment of iron as metal.

Photovoltaic performance and power conversion efficiency prediction of double fence porphyrins

To explore high efficiency dye-sensitized solar cells (DSSCs), two experimentally derived (single fence and double fence porphyrins) and two theoretically designed zinc porphyrin molecules with D-D-π-A-A configurations were studied. Density functional theory and time-dependent density functional theory were employed to simulate these two experimental dyes and dye@TiO₂ systems to understand why the double fence porphyrin molecule exhibits better photovoltaic performance than the single fence porphyrin molecule. For the short-circuit current (J_SC), the various parameters that affected the experimental magnitude of J_SC were analyzed from different aspects of absorption, charge transfer and chemical parameters as well as an electron injection process. The almost equal open-circuit voltages (V_OC) in the experiment were predicted by theoretical V_OC calculations. Our model predicted power conversion efficiencies (PCEs) of 1.993% and 10.866% for the single and double fence molecules, respectively, which are in accordance with the experimental values of 3.48% and 10.69%, respectively. In addition, one designed two new molecules based on the double fence porphyrin molecule with a 2-methyl-2H-benzo[d][1,2,3]triazole (BTA) unit bearing one fluorine and two fluorine atoms as the guest acceptor, respectively. Compared to the original molecules, the engineered molecules significantly improved the photovoltaic parameters, J_SC and V_OC, thereby causing excellent PCEs. The most outstanding designed molecule reached a PCE of 12.155%, and is considered a candidate dye for high-efficiency DSSC. This study provides insights into the photoelectric properties of single and double fence porphyrins. It also demonstrated that the strong electron-withdrawing ability of fluorine atoms would enhance the photovoltaic performance and provide a guideline for the further design of double fence porphyrins.

Enhancing the Photoelectric Properties of Zinc Porphyrin Dyes by Introducing Five-Membered Heterocyclic Rings into the Electron Donor: A Density Functional Theory and Time-Dependent Density Functional Theory Study

To fabricate highly efficient dye sensitizers for dye-sensitized solar cells, new zinc porphyrin dye sensitizers were designed based on one of the most efficient dyes, YD2-o-C8, by introducing electron-rich heterocyclic rings into the electron donor. Five potentially efficient dyes, Dye1-5, were obtained by replacing the phenyl group of the donor in YD2-o-C8 with pyrrolyl, furyl, and thienyl groups. The electronic structures, absorption spectra, intramolecular charge-transfer characteristics, and excited-state lifetimes of the designed dyes were investigated using the density functional theory and time-dependent density functional theory methods. All the designed dyes exhibit better photoelectric properties than those of YD2-o-C8. Compared with YD2-o-C8, the designed new dyes have smaller frontier molecular orbital energy gaps and obvious red-shifting absorption spectra in the Q band. The analyses of charge density difference plots and intramolecular charge-transfer characteristics indicated that the designed dyes can better promote intramolecular charge transfer and electron-hole separation. Among the five designed dyes, Dye1 with a pyrrolyl group exhibits the best performance. Dye3 and Dye5 with methyl-furyl and methyl-thienyl groups, respectively, exhibit the next best performance. Dye2 and Dye4 with furyl and thienyl groups, respectively, are the worst performers. The introduced methyl group can further improve the electron-donating ability of heterocyclic rings and promote the red shift of the Q bands and intramolecular charge transfer of dyes. The excited-state lifetimes of the new dyes were in the following order: YD2-o-C8 < Dye4 < Dye2 < Dye5 < Dye3 < Dye1, which shows their stronger abilities to inject electrons into semiconductor films.

Design of high performance p-type sensitizers with pyridinium derivatives as the acceptor by theoretical calculations

Based on triphenylamine as an electron donor and thiophene as a π-linker, Series P and A p-type sensitizers were designed to investigate the effects of the different acceptors on the properties of the sensitizers. The optimized molecular structures, electronic and optical properties were investigated by density functional theory (DFT) and time-dependent DFT (TD-DFT). The results showed that the properties of the dyes can be tuned by the introduction of the different electron-withdrawing groups to the N atom in the pyridinium acceptor. Compared with the synthesized Series P dyes used in p-type sensitizers, the properties of Series A dyes, except for two dyes that cannot be used as p-type sensitizers, are improved by means of modifying pyridinium acceptors. Due to the suitable electron-withdrawing ability of the hexafluorodiacetylamino group in its acceptor, A6 has the narrowest energy gap (1.90 eV), the largest driving force of hole injection (ΔG_inj, −0.68 eV), the high light harvesting efficiency (LHE, 0.9984) and the smallest internal reorganization energy (λ_int, 5.05 kcal mol⁻¹). Hence, A6 not only enhances electronic excitation, but also improves the reorganization energy. Importantly, A6 shows the largest red shift and the maximum integral values of the adsorption over the visible light, as well as the strongest adsorption energy (−74.80 kcal mol⁻¹) on a NiO surface. Thus, A6 may be a promising sensitizer for the p-type dye-sensitized solar cells (DSSCs), and the acceptor of A6 may provide a new and easily accessible high performance acceptor for p-type sensitizers.

Based on triphenylamine as an electron donor and thiophene as a π-linker, Series P and A p-type sensitizers were designed to investigate the effects of the different acceptors on the properties of the sensitizers.

Effect of Nitrogen Cation as "Electron Trap" at π-Linker on Properties for p-Type Photosensitizers: DFT Study

On the basis of thieno(3,2-b)thiophene and dithieno[3,2-b:2′,3′-d]thiophene (T2 and T3 moieties) as π-linker, the A, D and S series dyes were designed to investigate the effect of the introducing N⁺ as an “electron trap” into T2 and T3 on the properties of the dyes. The optimized structures, electronic and optical properties were investigated by the density functional theory (DFT) and time-dependent DFT (TD-DFT). The results show that the properties of the dyes are sensitive to the N⁺ position in π-linkers. D series dyes with electron-withdrawing units located near the donor have better properties than the corresponding A series with the electron-withdrawing units located near the acceptor. For A and D series, the N⁺ modified dye named T2N+1-d displays the largest red shift of the UV–vis absorption, the maximum integral values of the adsorption-wavelength curves over the visible light, the highest light harvesting efficiency (LHE, 0.996), and the strongest adsorption energy (−44.33 kcal/mol). T2N+1-d also has a large driving force of hole injection (ΔG_inj, −0.74 eV), which results in a more efficient hole injection. Bearing a lengthier π-linker than T2N+1-d, the properties of T2N+1-s are further improved. T2N+1-d moiety or its increased conjugated derivatives may be a promising π-linker.

Structure and Photoelectrical Properties of Natural Photoactive Dyes for Solar Cells

A series of natural photoactive dyes, named as D1–D6 were successfully extracted from six kinds of plant leaves for solar cells. The photoelectrical properties of dyes were measured via UV-Vis absorption spectra, cyclic voltammetry as well as photovoltaic measurement. To theoretically reveal the experimental phenomena, the chlorophyll was selected as the reference dye, where the ground and excited state properties of chlorophyll were calculated via density functional theory (DFT) and time-dependent density functional theory (TD-DFT). The experimental results show that the absorption peaks of those dyes are mainly distributed in the visible light regions of 400–420 nm and 650–700 nm, which are consistent with the absorption spectrum of chlorophyll. The photoelectrical conversion efficiencies of the solar cells sensitized by the six kinds of natural dyes are in the order of D1 > D4 > D2 > D5 > D6 > D3. The dye D1 performance exhibits the highest photoelectrical conversion efficiency of 1.08% among the investigated six natural dyes, with an open circuit voltage of 0.58 V, a short-circuit current density of 2.64 mA cm−2 and a fill factor of 0.70.