Selective O-Alkylation of the Crown Conformer of Tetra(4-hydroxyphenyl)calix[4]resorcinarene to the Corresponding Tetraalkyl Ether

Copper(I)-Catalyzed Alkyne-Azide Cycloaddition (CuAAC) "Click" Reaction: A Powerful Tool for Functionalizing Polyhydroxylated Platforms

Click chemistry is currently one of the most used tools for the generation of complex organic molecules. The advantages of using click chemistry in organic synthesis are remarkable; in many cases, the reactions occur under mild conditions and are free of solvents, with high yields and short reaction times. This makes it an extraordinarily effective and viable alternative for obtaining complex/conjugated molecules. In this review, the use of click chemistry CuAAC is especially emphasized for polyhydroxylated platforms such as resorcinarenes or calixarenes, focusing mainly on aspects of synthesis, specifically conditions, reagents, and methodologies.

Removal of Toxic Metal Ions Using Poly(BuMA–co–EDMA) Modified with C-Tetra(nonyl)calix[4]resorcinarene

A copolymer of poly(BuMA–co–EDMA) modified with C-tetra(nonyl)calix[4]resorcinarene was obtained via the impregnation method. The formation of the modified copolymer was confirmed and investigated using various techniques; in this way, the presence of calix[4]resorcinarene was confirmed by FT-IR spectroscopy and by high resolution transmission electron microscopy. The modified copolymer was used for the removal of highly toxic cations (Pb²⁺, Hg²⁺, and Cd²⁺) from aqueous solutions. To perform the removal, we used the batch sorption technique and the effects of time of contact, pH, and volume of sample on the effective sorption were determined. The best results were observed for Pb²⁺ extraction, which was comparatively more efficient. Adsorption–desorption experiments revealed that the modified copolymer could be used for several cycles without significant loss of adsorption capacity. Finally, the results showed that the modified copolymer application is highly efficient for the removal of lead ions from aqueous solutions.

Experimental Comparative Study of Dynamic Behavior in Solution Phase of C-Tetra(phenyl)resorcin[4]arene and C-Tetra(phenyl)pyrogallol[4]arene

The synthesis of phenyl-resorcinarenes and pyrogallolarenes is known to produce a conformational mixture of cone and chair isomers. Depending on the synthesis conditions the composition of the conformational mixture is variable; however, the cone conformer is the greatest proportion of phenyl-resorcin[4]arenes and chair conformer of pyrogallol[4]arenes. The experimental evidence suggests that phenyl-substituted resorcinarene and pyrogallolarene exist as a dynamic boat in solution.

Preparation of Methacrylate-based Polymers Modified with Chiral Resorcinarenes and Their Evaluation as Sorbents in Norepinephrine Microextraction

Aminomethylation reactions between chiral amino compounds (S)-(-)-1-phenylethylamine and l-proline with tetranonylresorcinarene and tetra-(4-hydroxyphenyl)resorcinarene in presence of formaldehyde were studied. The reaction between l-proline and resorcinarenes generated regioselectively chiral tetra-Mannich bases, due to the molecular incorporation of the fragment of the chiral amino acid. On the other hand, tetranonylresorcinarene and (S)-(-)-1-phenylethylamine formed regio- and diasteroselectively chiral tetrabenzoxazines, both by chiral auxiliary functionalization and by the transformation of the molecular structure that confers inherent chirality. The products obtained were characterized using IR, 1H-NMR, 13C-NMR, COSY, HMQC, and HMBC techniques. The reaction of (S)-(-)-1-phenylethylamine with tetra-(4-hydroxyphenyl)resorcinarene did not proceed under the experimental conditions. Once the chiral aminomethylated tetra-(4-hydroxyphenyl)resorcinarene was obtained, the chemical modification of poly(GMA-co-EDMA) was studied, and the results showed an efficient incorporation of the aminomethylated compound. For the physical modification, chiral aminomethylated tetranonylresorcinarenes were employed, finding that the incorporation of modified resorcinarenes occurs, but with less efficiency than that observed using chemical modification. The modified polymers were characterized via FT-IR, scanning electron microscopy imaging, and elemental analysis. Finally, polymers modified with chiral resorcinarenes were used as sorbents in norepinephrine microextraction; for practical purposes, artificial urine was prepared and used. To perform the microextraction, the decision was made to use the modern rotating-disk sorptive extraction technique (RDSE), because of its analytical attributes as a green, or eco-friendly, technique. According to the results, the method preliminarily validated for the determination of norepinephrine in artificial urine shows that the modified polymer with chiral derivative of tetra-(4-hydroxyphenyl)resorcinarene worked effectively as a new sorbent phase for the quantitative microextraction of norepinephrine, exhibiting high stability and homogeneity of composition and structure within the working range.

Aminomethylated Calix[4]resorcinarenes as Modifying Agents for Glycidyl Methacrylate (GMA) Rigid Copolymers Surface

Functionalization of tetrapropylcalix[4]resorcinarene, tetrapentylcalix[4]resorcinarene, tetranonylcalix[4]resorcinarene, and tetra-(4-hydroxyphenyl)calix[4]resorcinarene by means of aminomethylation reactions with the amino acids β-alanine and l-proline in the presence of aqueous formaldehyde was carried out. When β-alanine was used, the reaction products were tetrabenzoxazines. The reaction with tetra-(4-hydroxyphenyl)calix[4]resorcinarene did not proceed under the experimental conditions; therefore, l-proline was used, and the corresponding tetra-Mannich base was regio- and diasteroselectively formed. The products were characterized via FT-IR, ¹H NMR, ¹³C NMR, and elemental analysis. With these aminomethylated-calix[4]resorcinarenes, the chemical surface modification of the copolymers poly(GMA-co-EDMA) and poly(BMA-co-EDMA-co-MMA) in a basic medium was studied. The results were quite satisfactory, obtaining the corresponding copolymers functionalized by nucleophilic substitution reaction and ring-opening between the carboxyl group of the upper rim of aliphatic calix[4]resorcinarenes and the hydroxyl group of the lower rim in the aromatic calix[4]resorcinarene and the epoxy group of the glycidyl methacrylate residue of each copolymer. The modified copolymers were characterized via FT-IR, scanning electron microscopy imaging, and elemental analysis. Finally, the modified copolymer surfaces exhibited interaction with peptides, showing their potential application in chromatographic separation techniques such as high-performance liquid chromatography.

Analysis by RP-HPLC and Purification by RP-SPE of the C-Tetra(p-hydroxyphenyl)resorcinolarene Crown and Chair Stereoisomers

A method for the separation of stereoisomer mixture of the octol C-tetra(p-hydroxyphenyl)calix[4]resorcinarene that was obtained by an acid cyclocondensation reaction between resorcinol and benzaldehyde is reported in this paper. A crude product from octol formation reaction was analyzed by reverse-phase high-performance liquid chromatography (RP-HPLC), and two well-resolved signals corresponding to the crown and chair isomers were found. A reverse phase in solid-phase extraction (RP-SPE) protocol allowed the separation of the two stereoisomers with high purity of each isomer. Finally, the crude and purified stereoisomers were characterized by using FT-IR, ¹H-NMR, and ¹³C-NMR techniques, confirming the chemical identity of the two isomers and the efficiency in the separation process.

Synthetic Peptide Purification via Solid-Phase Extraction with Gradient Elution: A Simple, Economical, Fast, and Efficient Methodology

A methodology was implemented for purifying peptides in one chromatographic run via solid-phase extraction (SPE), reverse phase mode (RP), and gradient elution, obtaining high-purity products with good yields. Crude peptides were analyzed by reverse phase high performance liquid chromatography and a new mathematical model based on its retention time was developed in order to predict the percentage of organic modifier in which the peptide will elute in RP-SPE. This information was used for designing the elution program of each molecule. It was possible to purify peptides with different physicochemical properties, showing that this method is versatile and requires low solvent consumption, making it the least polluting one. Reverse phase-SPE can easily be routinely implemented. It is an alternative to enrich and purified synthetic or natural molecules.

Calixarenes: Generalities and Their Role in Improving the Solubility, Biocompatibility, Stability, Bioavailability, Detection, and Transport of Biomolecules

The properties and characteristics of calix[n]arenes are described, as well as their capacity to form amphiphilic assemblies by means of the design of synthetic macrocycles with a hydrophilic head and a hydrophobic tail. Their interaction with various substances of interest in pharmacy, engineering, and medicine is also described. In particular, the role of the calix[n]arenes in the detection of dopamine, the design of vesicles and liposomes employed in the manufacture of systems of controlled release drugs used in the treatment of cancer, and their role in improving the solubility of testosterone and anthelmintic drugs and the biocompatibility of biomaterials useful for the manufacture of synthetic organs is emphasized. The versatility of these macrocycles, able to vary in size, shape, functional groups, and hydrophobicity and to recognize various biomolecules and molecules with biological activity without causing cytotoxicity is highlighted.

Host-Guest Recognition of Pesticides by Calixarenes

This article is based on a review of the literature and our own experience with toxicological molecules. We explain the nature of calix[n]arenes and as their recognized properties are used to detect compounds of toxicological interest, mainly the most important pesticide families such as organophosphorated, organochlorine compounds, pyrethroid insecticides, carbamate fungicides, and herbicides, using different techniques. In addition, we show the role of the macrocycle and its interactions, and the advantage of using this type of compound for improving conventional techniques, where the phenomenon of recognition is very important, such as chromatography, solid-phased extraction, and the development of specific sensors, among others and Even we also show the use of this macrocycle for detoxication procedures in vivo. In this way, we display as the multiple possibilities of functionalization of the calix[n]arenes makes these versatile molecules in the phenomena of specific recognition. Finally, This review highlights the main analytical methods reported in the literature for determination of plaguicides by host-guest interaction with calixarenes. In this way, among the available analytical tools, chromatographic, and electrochemical-based methods are the most used techniques for the detection and to quantify plaguicides using calixarenes.

Conformational Aspects of the O-acetylation of C-tetra(phenyl)calixpyrogallol[4]arene

Reaction between pyrogallol and benzaldehyde results in a conformational mixture of C-tetra(phenyl)pyrogallol[4]arene (crown and chair). The conformer mixture was separated using crystallization procedures and the structures were determined using FTIR, ¹H-NMR, and ¹³C-NMR. O-acetylation of C-tetra(phenyl)pyrogallol[4]arene (chair) with acetic anhydride, in pyridine results in the formation of dodecaacetyl-tetra(phenyl)pyrogallol[4]arene. The structure was determined using ¹H-NMR and ¹³C-NMR finding that the product maintains the conformation of the starting conformer. On the other hand, the O-acetylation reaction of C-tetra(phenyl)pirogallol[4]arene (crown) under same conditions proceeded efficiently, and its structure was determined using ¹H-NMR and ¹³C-NMR. Dynamic ¹H-NMR of acetylated pyrogallolarene was studied by means of variable temperature in DMSO-d₆ solution, and it revealed that two conformers are formed in the solution. Boat conformations for acetylated pyrogallolarene showed a slow interconversion at room temperature.