An Interaction of Rhamnolipids with Cu2+ Ions

Pathway to industrial application of heterotrophic organisms in critical metals recycling from e-waste

The transition to renewable energies and electric vehicles has triggered an unprecedented demand for metals. Sustainable development of these technologies relies on effectively managing the lifecycle of critical raw materials, including their responsible sourcing, efficient use, and recycling. Metal recycling from electronic waste (e-waste) is of paramount importance owing to ore-exceeding amounts of critical elements and high toxicity of heavy metals and organic pollutants in e-waste to the natural ecosystem and human body. Heterotrophic microbes secrete numerous metal-binding biomolecules such as organic acids, amino acids, cyanide, siderophores, peptides, and biosurfactants which can be utilized for eco-friendly and profitable metal recycling. In this review paper, we presented a critical review of heterotrophic organisms in biomining, and current barriers hampering the industrial application of organic acid bioleaching and biocyanide leaching. We also discussed how these challenges can be surmounted with simple methods (e.g., culture media optimization, separation of microbial growth and metal extraction process) and state-of-the-art biological approaches (e.g., artificial microbial community, synthetic biology, metabolic engineering, advanced fermentation strategies, and biofilm engineering). Lastly, we showcased emerging technologies (e.g., artificially synthesized peptides, siderophores, and biosurfactants) derived from heterotrophs with the potential for inexpensive, low-impact, selective and advanced metal recovery from bioleaching solutions.

Hurdle Technology Approach to Control Listeria monocytogenes Using Rhamnolipid Biosurfactant

This study evaluates the combination of mild heat with a natural surfactant for the inactivation of L. monocytogenes Scott A in low-water-activity (a_w) model systems. Glycerol or NaCl was used to reduce the a_w to 0.92, and different concentrations of rhamnolipid (RL) biosurfactant were added before heat treatment (60 °C, 5 min). Using glycerol, RL treatment (50-250 µg/mL) reduced bacterial population by less than 0.2 log and heat treatment up to 1.5 log, while the combination of both hurdles reached around 5.0 log reduction. In the NaCl medium, RL treatment displayed higher inactivation than in the glycerol medium at the same a_w level and a larger synergistic lethal effect when combined with heat, achieving ≥ 6.0 log reduction at 10-250 µg/mL RL concentrations. The growth inhibition activity of RL was enhanced by the presence of the monovalent salts NaCl and KCl, reducing MIC values from >2500 µg/mL (without salt) to 39 µg/mL (with 7.5% salt). The enhanced antimicrobial activity of RL promoted by the presence of salts was shown to be pH-dependent and more effective under neutral conditions. Overall, results demonstrate that RL can be exploited to design novel strategies based on hurdle approaches aiming to control L. monocytogenes.

Rhamnolipids as Effective Green Agents in the Destabilisation of Dolomite Suspension

In this paper, we describe an application of mono- and dirhamnolipid homologue mixtures of a biosurfactant as a green agent for destabilisation of a dolomite suspension. Properties of the biosurfactant solution were characterised using surface tension and aggregate measurements to prove aggregation of rhamnolipids at concentrations much lower than the critical micelle concentration. Based on this information, the adsorption process of biosurfactant molecules on the surface of the carbonate mineral dolomite was investigated, and the adsorption mechanism was proposed. The stability of the dolomite suspension after rhamnolipid adsorption was investigated by turbidimetry. The critical concentration of rhamnolipid at which destabilisation of the suspension occurred most effectively was found to be 50 mg·dm-3. By analysing backscattering profiles, solid-phase migration velocities were calculated. With different amounts of biomolecules, this parameter can be modified from 6.66 to 20.29 mm·h-1. Our study indicates that the dolomite suspension is destabilised by hydrophobic coagulation, which was proved by examining the wetting angle of the mineral surface using the captive bubble technique. The relatively low amount of biosurfactant used to destabilise the system indicates the potential application of this technology for water treatment or modification of the hydrophobicity of mineral surfaces in mineral engineering.

Rhamnolipids Application for the Removal of Vanadium from Contaminated Sediment

The use of biosurfactants in bioremediation of hydrocarbons and in the removal of heavy metals in crude oils is considered an attractive subject. The vanadium pollution in soil and sediments had attracted research interest in exploring eco-friendly methods of remediation. The present study was conducted to evaluate the potential of a biosurfactant to remove vanadium from artificially contaminated sand. The biosurfactant producer's strain selection process was carried out from 23 strains in two steps. In the primary screening, four preliminary tests were carried out: the emulsification index (24 and 72 h), the surface tension, and the rate of bacterial adhesion to hydrocarbons. In the secondary screening, the surface tension and rhamnolipids concentration were determined, also critical micellar concentration and dilution were calculated. The RNA 16s of selected strain was sequence and the strain was identified as Pseudomonas sp. By chromatographic and spectroscopic assays, the structure of the rhamnolipids was determined. The maximal vanadium removal efficiency (85.5%) was achieved with a rhamnolipids' concentration of 240 mg l^-1. The vanadium concentration was determined by spectroscopic technique. Rhamnolipids produced by this strain can potentially be used in the removal of vanadium.

Characterization of antimicrobial effect of organotin-based catalysts on diesel-biodiesel deteriogenic microorganisms

Organotin compounds are applied in several industrial reactions and can present antifungal and antibacterial activities. Incorrect handling and storage practices of biodiesel and diesel-biodiesel blends can lead to microbial development, impacting its final quality. Concerning this problem, this work investigated the antimicrobial action of two organotin catalysts used in biodiesel production with four isolated microroorganisms (Bacillus pumilus, Pseudomonas aeruginosa, Pseudallescheria boydii, and Aureobasidium pullulans) and a pool of microorganisms (ASTM E1259 standard practice). Samples of soybean biodiesel with different concentrations of dibutyl tin dilaurate (catalyst 1) and di-n-butyl-oxo-stannane (catalyst 2) were prepared and added of mineral medium. The pool of microorganisms was inoculated and incubated at 30 °C and final biomass was weighted after 14 days. Thereafter, soybean biodiesel with catalyst 2 was used. Fungal biomass was weighted, and plate count was used to assess bacterial growth. Results show that catalysts 1 and 2 presented no inhibitory activity on the pool of microorganisms evaluated. A slight inhibitory activity was observed for B. pumilus and A. pullulans growth, but not for P. boydii, P. aeruginosa, or the pool of microorganisms. All experiment exhibited acidification higher than sterile control. Infrared analysis show less microbiological degradation products in the tin-protected fuel with ASTM inoculum. These results suggest that these tin-based catalysts show no toxic effect on native microbial population and a slight effect on some isolated microbial population in laboratory scale and for the first time shows that these organotin compounds can be employed safely as biodiesel catalyst. Graphical abstract.

Exploring the Dual Interaction of Natural Rhamnolipids with Plant and Fungal Biomimetic Plasma Membranes through Biophysical Studies

Rhamnolipids (RLs) are potential biocontrol agents for crop culture protection. Their mode of action has been proposed as dual, combining plant protection activation and antifungal activities. The present work focuses on the interaction of natural RLs with plant and fungi membrane models at the molecular scale. Representative models were constructed and the interaction with RLs was studied by Fourier transform infrared (FTIR) and deuterium nuclear magnetic resonance (²H NMR) spectroscopic measurements. Molecular dynamic (MD) simulations were performed to investigate RL insertion in lipid bilayers. Our results showed that the RLs fit into the membrane models and were located near the lipid phosphate group of the phospholipid bilayers, nearby phospholipid glycerol backbones. The results obtained with plant plasma membrane models suggest that the insertion of RLs inside the lipid bilayer did not significantly affect lipid dynamics. Oppositely, a clear fluidity increase of fungi membrane models was observed. This effect was related to the presence and the specific structure of ergosterol. The nature of the phytosterols could also influence the RL effect on plant plasma membrane destabilization. Subtle changes in lipid dynamics could then be linked with plant defense induction and the more drastic effects associated with fungal membrane destabilization.