Enhanced Enzymatic Hydrolysis and Structural Features of Corn Stover by NaOH and Ozone Combined Pretreatment

Construction of a synthetic microbial community based on multiomics linkage technology and analysis of the mechanism of lignocellulose degradation

The efficient degradation of lignocellulose is a bottleneck for its integrated utilization. This research performed species analysis and made functional predictions in various ecosystems using multiomics coupling to construct a core synthetic microbial community with efficient lignocellulose degradation function. The synthetic microbial community was employed to degrade corn straw via solid-state fermentation. The degradation mechanisms were resolved using proteomics. The optimum culture conditions included 10% inoculum level (w/v), 4% nitrogen source ratio and a fermentation time of 23 d. Under these conditions, the degradation rates of cellulose, hemicellulose, and lignin were 34.91%, 45.94%, and 23.34%, respectively. Proteomic analysis revealed that lignin 1,4-β-xylanase, β-xylosidase and endo-1,4-β-xylanase were closely related to lignocellulose degradation. The metabolic pathways involved in lignocellulose degradation and the functional roles of eight strains were obtained. The synthesis of a microbial community via multiomics linkage technology can effectively decompose lignocellulose, which is useful for their further utilization.

Pretreatment and composting technology of agricultural organic waste for sustainable agricultural development

With the continuous development of agriculture, Agricultural organic waste (AOW) has become the most abundant renewable energy on earth, and it is a hot spot of research in recent years to realize the recycling of AOW to achieve sustainable development of agricultural production. However, lignocellulose, which is difficult to degrade in AOW, greenhouse gas emissions, and pile pathogenic fungi and insect eggs are the biggest obstacles to its return to land use. In response to the above problems researchers promote organic waste recycling by pretreating AOW, controlling composting conditions and adding other substances to achieve green return of AOW to the field and promote the development of agricultural production. This review summarizes the ways of organic waste treatment, factors affecting composting and problems in composting by researchers in recent years, with a view to providing research ideas for future related studies.

Cellulosic Fiber Waste Feedstock for Bioethanol Production via Bioreactor-Dependent Fermentation

The bioconversion of environmental wastes into energy is gaining much interest in most developing and developed countries. The current study is concerned with the proper exploitation of some industrial wastes. Cellulosic fiber waste was selected as a raw material for producing bioethanol as an alternative energy source. A combination of physical, chemical, and enzymatic hydrolysis treatments was applied to maximize the concentration of glucose that could be fermented with yeast into bioethanol. The results showed that the maximum production of 13.9 mg/mL of glucose was achieved when 5% cellulosic fiber waste was treated with 40% HCl, autoclaved, and followed with enzymatic hydrolysis. Using SEM and FTIR analysis, the instrumental characterization of the waste fiber treatment confirmed the effectiveness of the degradation by turning the long threads of the fibers into small pieces, in addition to the appearance of new functional groups and peak shifting. A potent yeast strain isolated from rotten grapes was identified as Starmerella bacillaris STDF-G4 (accession number OP872748), which was used to ferment the obtained glucose units into bioethanol under optimized conditions. The maximum production of 3.16 mg/mL of bioethanol was recorded when 7% of the yeast strain was anaerobically incubated at 30 °C in a broth culture with the pH adjusted to 5. The optimized conditions were scaled up from flasks to a fermentation bioreactor to maximize the bioethanol concentration. The obtained data showed the ability of the yeast strain to produce 4.13 mg/mL of bioethanol after the first 6 h of incubation and double the amount after 36 h of incubation to reach 8.6 mg/mL, indicating the efficiency of the bioreactor in reducing the time and significantly increasing the product.

Structural Changes of Alkali Lignin under Ozone Treatment and Effect of Ozone-Oxidized Alkali Lignin on Cellulose Digestibility

In this study, the structural changes of alkali lignin induced by ozonation were investigated, and the effect of ozone-treated alkali lignin and its mechanism on Avicel enzymatic hydrolysis was examined. The physicochemical properties of alkali lignin were analyzed by FTIR, 1H-13C HSQC NMR, and GPC. It was revealed that ozone pretreatment increased the content of carboxyl and/or aldehyde groups and the negative zeta potential of alkali lignin, which enhanced the electrostatic repulsion between alkali lignin and cellulase; The S/G ratio was reduced, indicating the hydrophobic interaction was diminished. The Langmuir adsorption isotherm showed that the cellulase binding strength of ozone pretreated alkali lignin (OL-pH3, OL-pH7, and OL-pH12 were 16.67, 13.87, and 44.05 mL/g, respectively) was significantly lower than that of alkali lignin (161.29 mL/g). The 72 h hydrolysis yields of Avicel added with OL-pH3, OL-pH7, and OL-pH12 were 55.4%, 58.6%, and 54.9% respectively, which were 2.6–6.3% higher than that of Avicel added with AL (52.3%). This research aimed to reduce the non-productive adsorption between cellulase and lignin by investigating the structural changes of lignin caused by ozone treatment. For the first time, we discovered that ozone-treated alkali lignin has a further promotion effect on the enzymatic digestion of cellulose, providing a green and feasible pretreatment process for the enzymatic hydrolysis of lignocellulose and aiding in the more efficient utilization of biomass.

Optimization of Bioethanol Production from Enzymatic Treatment of Argan Pulp Feedstock

Argan pulp is an abundant byproduct from the argan oil process. It was investigated to study the feasibility of second-generation bioethanol production using, for the first time, enzymatic hydrolysis pretreatment. Argan pulp was subjected to an industrial grinding process before enzymatic hydrolysis using Viscozyme L and Celluclast 1.5 L, followed by fermentation of the resulting sugar solution by Saccharomyces cerevisiae. The argan pulp, as a biomass rich on carbohydrates, presented high saccharification yields (up to 91% and 88%) and an optimal ethanol bioconversion of 44.82% and 47.16% using 30 FBGU/g and 30 U/g of Viscozyme L and Celluclast 1.5 L, respectively, at 10%w/v of argan biomass.

Bioethanol Production by Enzymatic Hydrolysis from Different Lignocellulosic Sources

As the need for non-renewable sources such as fossil fuels has increased during the last few decades, the search for sustainable and renewable alternative sources has gained growing interest. Enzymatic hydrolysis in bioethanol production presents an important step, where sugars that are fermented are obtained in the final fermentation process. In the process of enzymatic hydrolysis, more and more new effective enzymes are being researched to ensure a more cost-effective process. There are many different enzyme strategies implemented in hydrolysis protocols, where different lignocellulosic biomass, such as wood feedstocks, different agricultural wastes, and marine algae are being used as substrates for an efficient bioethanol production. This review investigates the very recent enzymatic hydrolysis pathways in bioethanol production from lignocellulosic biomass.

Effects and Mechanisms of Alkali Recycling and Ozone Recycling on Enzymatic Conversion in Alkali Combined with Ozone Pretreatment of Corn Stover

In order to minimize waste liquor, save resources, and reduce costs, the effects of alkali recycling and ozone recycling on enzymatic conversion in alkali combined with ozone pretreatment of corn stover and the mechanism were studied. The results showed that as the number of cycles of alkali/ozone filtrate increased, the enzymatic conversion and the loss of reducing sugars showed a downward trend. It was indicated that the ability of alkali to damage lignocellulosic decreased with an increasing number of alkali circulation and the accumulation of lignin degradation products generated during ozonolysis inhibited enzymatic conversion. When the ozone filtrate was recovered and used for hydrolysis directly, the enzymatic conversion rates were basically the same compared with the first self-circulation of ozone filtrate, and no sewage was discharged. In conclusion, the optimal circulating pretreatment was four times alkali circulation and ozone filtrate was used as an enzymolysis liquid directly, and the conversion rates of cellulose and hemicellulose were 85.96% and 34.26%, respectively, saving 44% alkali consumption at the same time. This paper provided the theoretical basis for the development of lignocellulose pretreatment technology with low cost, high efficiency, and high conversion rate.

A Two-Step Ferric Chloride and Dilute Alkaline Pretreatment for Enhancing Enzymatic Hydrolysis and Fermentable Sugar Recovery from Miscanthus sinensis

A two-step process was proposed to enhance enzymatic hydrolysis of Miscanthus sinensis based on a comparative study of acid/alkaline pretreatments. Ferric chloride pretreatment (FP) effectively removed hemicellulose and recovered soluble sugars, but the enzymatic hydrolysis was not efficient. Dilute alkaline pretreatment (ALP) resulted in much better delignification and stronger morphological changes of the sample, making it more accessible to enzymes. While ALP obtained the highest sugar yield during enzymatic hydrolysis, the soluble sugar recovery from the pretreatment stage was still limited. Furthermore, a two-step ferric chloride and dilute alkaline pretreatment (F-ALP) has been successfully developed by effectively recovering soluble sugars in the first FP step and further removing lignin of the FP sample in the second ALP step to improve its enzymatic hydrolysis. As a result, the two-step process yielded the highest total sugar recovery (418.8 mg/g raw stalk) through the whole process.

Effect of Alkaline Black Liquor Recycling on Alkali Combined with Ozone Pretreatment of Corn Stalk

In the early stage, the best conditions for alkali-bound ozone pretreatment were studied. But after treatment, the alkaline black liquor was directly discarded due to the large amount of organic matter, resulting in environmental pollution and waste of resources. In this paper, the alkaline black liquor was recycled under the optimal pretreatment conditions. The results showed that the number of alkaline black liquor cycles had little effect on hemicellulose content, and had a great influence on cellulose content and lignin content. Through structural characterization of corn stover, it was found that the pretreatment caused structural changes of lignin in straw. However, when the alkaline black liquor was recycled for the fourth time, the ether bond in the side chain of lignin and the covalent bond between the components were not sufficiently destroyed, and the damage to the phenolic hydroxyl group was also weakened. It was indicated that when the alkaline black liquor was recycled for the fourth time, the destruction effect of the alkaline black liquor on the straw was significantly inhibited. Therefore, the optimal circulation time of alkaline black liquor was three times, and the cellulolytic conversion rate was 81.53%.

Enhanced Enzymatic Hydrolysis of Pennisetum alopecuroides by Dilute Acid, Alkaline and Ferric Chloride Pretreatments

In this study, effects of different pretreatment methods on the enzymatic digestibility of Pennisetum alopecuroides, a ubiquitous wild grass in China, were investigated to evaluate its potential as a feedstock for biofuel production. The stalk samples were separately pretreated with H₂SO₄, NaOH and FeCl₃ solutions of different concentrations at 120 °C for 30 min, after which enzymatic hydrolysis was conducted to measure the digestibility of pretreated samples. Results demonstrated that different pretreatments were effective at removing hemicellulose, among which ferric chloride pretreatment (FCP) gave the highest soluble sugar recovery (200.2 mg/g raw stalk) from the pretreatment stage. In comparison with FCP and dilute acid pretreatment (DAP), dilute alkaline pretreatment (DALP) induced much higher delignification and stronger morphological changes of the biomass, making it more accessible to hydrolysis enzymes. As a result, DALP using 1.2% NaOH showed the highest total soluble sugar yield through the whole process from pretreatment to enzymatic hydrolysis (508.5 mg/g raw stalk). The present work indicates that DALP and FCP have the potential to enhance the effective bioconversion of lignocellulosic biomass like P. alopecuroides, hence making this material a valuable and promising energy plant.