Photo-Oxidation of Bisphenol A in Aqueous Solutions at Near Neutral pH by a Fe(III)-Carboxylate Complex with Oxalacetic Acid as a Benign Molecule

Photochemistry of the Fe(III)-iminodiacetic acid complex under UVA and UV/Vis irradiation: synthesis and characterisation

The photochemistry of Fe(III)-Iminodiacetic acid complex (Fe(III)-IDA) was studied under UVA and UV/Vis irradiation. The synthesis was realised via molar ratio method modified by reaction of IDA as ligand with Fe(III) as metal. The interaction of Fe(III) with IDA was characterised using Fourier-transform infrared (FTIR) and spectroscopy UV-visible. The results confirmed the stability of the complex at pH > 5; with constant of stability (Log β = 10.02) and stoichiometry Fe(III): IDA = 1:1. In addition, the redox potential was calculated at 521 mV, which is significantly lower than E° for the Fe(III)/Fe(II) couple. The photolysis of this complex in the presence of UVA light and UV/Vis light at different pHs was carried out. This photolysis was followed by several assay Fe(II) and •OH. The results show that the Fe(III)-IDA complex present a photo-reactivities under either light source and the phenomenon is faster when the UV/Vis was used. The initial conversion rate (r0) decreased with increasing of initial pH. The formation of hydroxyl radicals via the Fenton reaction was improved at pH = 2.12 for both irradiation sources used. Reduction of total organic carbon was also studied using the total organic carbon (TOC). The feasibility of amino iron complexes to improve the Fenton process under irradiation was confirmed. Additionally, our research also evidenced the optimal conditions for the formation of hydroxyl radicals; which are the key factor in remove pharmaceuticals pollutants in aqueous media. Based on the results obtained, the Fe(III)-IDA complex could be efficiently photolysis under UV/Vis light.

Transfer of Bisphenol A and Trace Metals from Plastic Packaging to Mineral Water in Ouagadougou, Burkina Faso

The consumption of packaged water is growing rapidly in both urban and rural centres in Burkina Faso. Bisphenol A (BPA) and trace metals are among the compounds used in the manufacture of plastic packaging, and their presence in water can pose a health risk to consumers due to their alleged toxicity. Therefore, this study explores the transfer of these compounds from plastic packaging to mineral water in Sudano-Sahelian climatic conditions. Ten samples of packaged sachet water commercialised in Ouagadougou were studied. An absence of BPA in the borehole water used to produce packaged water has been shown. The transfer of BPA into mineral water increases with storage temperature. The BPA that appears in packaged water degrades over time. BPA concentrations ranged from 0 to 0.38 mg/L after two weeks of storage, 0 to 0.8 mg/L after four weeks of storage and 0 to 0.35 mg/L after 8 weeks of storage. Analysis of the trace metals showed steadily increasing concentrations from the second to the sixth weeks, with concentrations ranging from 0 to 9.7 µg/L for cadmium and from 0 to 0.13 mg/L for iron in the sachet water samples.

Molecular Oxygen Activation by Citric Acid Boosted Pyrite-Photo-Fenton Process for Degradation of PPCPs in Water

Pyrite has been used in photo-Fenton reactions for the degradation of pollutants, but the application of photo-Fenton processes with extra H₂O₂ in real water/wastewater treatment has still been limited by the economic cost of H₂O₂ and artificial light sources. Herein, citric acid (CA) and simulated/natural sunlight are used to develop a pyrite-based photo-Fenton system (pyrite-CA-light) in situ generating H₂O₂ through the enhanced activation of molecular oxygen. The degradation of pharmaceuticals and personal care products (PPCPs), especially acetaminophen (APAP) as the main target pollutant, in the pyrite-CA-light system was investigated. The effects of influencing factors such as various organic acids, APAP concentration, pH, pyrite dosage, CA concentration and co-existing anions (HCO₃^-, Cl^-, NO₃^-, SO₄^2- and H₂PO₄^-) were examined. At a pyrite dosage of 0.1 g L^-1, CA concentration of 0.6 mM and an initial pH of 6.0, the degradation efficiency of APAP (30 μM) was 99.1% within 30 min under the irradiation of xenon lamp (70 W, λ ≥ 350 nm). Almost the same high efficiency of APAP degradation (93.9%) in the system was achieved under natural sunlight irradiation (ca. 650 W m^-2). The scavenging experiments revealed that the dominant active species for degrading APAP was hydroxyl radical (HO^•). Moreover, a quantitative structural-activity relationship (QSAR) model for pseudo-first-order rate constants (k_obs) was established with a high significance (R² = 0.932, p = 0.001) by using three descriptors: octanol-water partition coefficient (logKow), dissociation constant (pK_a) and highest occupied molecular orbital (HOMO). This work provides an innovative strategy of the photo-Fenton process for the degradation of PPCPs using natural minerals and ordinary carboxylic acid under sunlight.

2,2-Bis(4-Hydroxyphenyl)-1-Propanol-A Persistent Product of Bisphenol A Bio-Oxidation in Fortified Environmental Water, as Identified by HPLC/UV/ESI-MS

Biodegradation of bisphenol A in the environmental waters (lake, river, and sea) has been studied on the base of fortification of the samples taken and the biodegradation products have been analyzed using HPLC/UV/ESI-MS. Analysis of the characteristic fragmentation patterns of [M-H]^- ions permitted unambiguous identification of the biodegradation products as 2,2-bis(4-hydroxyphenyl)-1-propanol or as p-hydroxyacetophenone, depending on the type of surface water source. The formation of 2,2-bis(4-hydroxyphenyl)-1-propanol was much more common than that of p-hydroxyacetophenone. Moreover, 2,2-Bis(4-hydroxyphenyl)-1-propanol has not been further biodegraded, in contrast to the p-hydroxyacetophenone, which was further mineralized. It has been proved, for the first time, that 2,2-bis(4-hydroxyphenyl)-1-propanol can be regarded as persistent product of bisphenol A biodegradation in the fortified environmental waters.

Iron phthalocyanine-sensitized magnetic catalysts for BPA photodegradation

The catalytic behavior of iron phthalocyanine (FePc)-sensitized magnetic nanocatalysts was evaluated for their application in the oxidative treatment of Bisphenol A (BPA) under mild environmental conditions. Two types of FePc (Fe(II)Pc and Fe(III)Pc), which are highly photosensitive compounds, were immobilized on the surface of functionalized magnetite. The nanomaterials were characterized by high resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analyses (TGA). The generation of singlet oxygen by nanomaterials was also investigated. In the presence of UVA light exposure (365 nm) and 15 mM H₂O₂, the M@Fe(III)Pc photocatalyst gave the best results; for a catalyst concentration of 2.0 g L ^− 1, around 60% BPA was removed after 120 min of reaction. These experimental conditions were further tested under natural solar light exposure, for which also M@Fe(III)Pc exhibited enhanced oxidative catalytic activity, being able to remove 83% of BPA in solution. The water samples were less cytotoxic after treatment, this being confirmed by the MCF-7 cell viability assay.

A review on the use of chelating agents as an alternative to promote photo-Fenton at neutral pH: Current trends, knowledge gap and future studies

In this review, we have critically examined the alternatives to conventional photo-Fenton process such as the strategies to perform it in circumneutral pH in the so-called photo-Fenton like process. They include iron chelation, iron replacement with another metal and use of iron immobilized on surfaces of solid materials, use of iron oxides, among others. The use of such strategies can be employed to overcome the challenges identified in conventional photo-Fenton, moreover, advantages and drawback of each technique must be clarified and the recent achievements should be shared with the scientific community. The use of a chelating agent to make iron soluble at circumneutral pH presents many advantages when compared to other current techniques. However, the correct understanding of the chelating process, complex activity and the complex resistance along with the mechanism of radical production should be taken into account to prepare an effective photo-Fenton with complexed iron. The review also identifies the current trends in chelate assisted photo-Fenton process and the unexplored areas in this field of study. A discussion about the environmental and safety issues in the application of these methods, with emphasis to the Fe chelation strategy, was also considered with detailed review over the past ten years.

Adsorption of low concentrations of bromide ions from water by cellulose-based beads modified with TEMPO-mediated oxidation and Fe(III) complexation

Due to strong activity, it is very difficult to remove low concentrations of bromide in medical wastewater by traditional method, thus highly effective and greener adsorbents should be utilized to design. In this work, the cellulose beads (CBs) were modified by the TEMPO-mediated oxidation and then bonded with Fe³⁺ to fabricate Fe(III)-complexed carboxylated cellulose beads (Fe-CCBs) adsorbents. Structure and properties of Fe-CCBs were analyzed using Energy dispersive spectrum (EDS), Scanning electron microscopy (SEM), Fourier transform infrared spectrum (FT-IR), total acidity and basicity groups, X-ray diffraction (XRD), N₂ adsorption-desorption and Thermogravimetric (TGA). Moreover, batch adsorption experiments showed that the adsorption of Br^- was better consistent with general-order kinetic model and Liu isotherm model, which could also further clarify the adsorption process mechanism. Meanwhile, the results revealed that removal of Br- was a spontaneous exothermic process and was more suitable to be carried out under neutral or acidic conditions. Furthermore, the mechanism of adsorption behavior of bromide ions on Fe-CCBs was based on a combination of electrostatic attraction and outer-sphere complexation. The results of this study can provide guidance for the design of novel material adsorbents and the removal of harmful anions from aqueous solutions.