Simultaneous Preparation of Salidroside and p-Tyrosol from Rhodiola crenulata by DIAION HP-20 Macroporous Resin Chromatography Combined with Silica Gel Chromatography

Preparation and Tumor Inhibitory Activity of Tricin from Carex Meyeriana Kunth

This study describes the purification and preparation of tricin (5, 7, 4-trihydroxy-3, 5-dimethoxyflavone) from Carex Meyeriana Kunth via adsorption and desorption using macroporous resins and high-performance liquid chromatography. Six resins were tested to evaluate the static adsorption and desorption capacities. The HPD-300 resin was selected as the adsorption material to enrich tricin because of its suitable adsorption and desorption capacities. Adsorption thermodynamics and kinetics were studied on HPD-300 resin, and the results agreed with the Langmuir model and quasi-second-order kinetics model, respectively. The parameters of the dynamic adsorption and desorption tests were then optimized. The purity of tricin increased from 2.6 mg/g to 45.1 mg/g with a recovery yield of 76.4% after purification using HPD-300 resin. Then, Prep-HPLC was used to further purify tricin. The purity of tricin reached 99.4%, with a recovery yield of 78.0% thereafter. Tricin exerts an inhibitory effect on the proliferation of various tumor cells, including gastric cancer SGC-7901 cells. It significantly suppresses cell colony formation while also altering cell cycle progression metabolism by decreasing the proportion of cells in the G0/G1 phase and increasing the proportion in the S and G2/M phases. Additionally, tricin affects the efficiency of SGC-7901 cell lactate production, ATP content, and glucose uptake. These findings suggest that tricin may impede tumor cell proliferation through its impact on cell cycle progression and energy metabolism.

Bio-Fabrication of ZnONPs from Alkalescent Nucleoside Antibiotic to Control Rice Blast: Impact on Pathogen (Magnaporthe grisea) and Host (Rice)

In the traditional method of the bio-fabrication of zinc oxide nanoparticles (ZnONPs), bacterial strains face metal toxicity and antimicrobial action. In the current study, an alkalescent nucleoside antibiotic was mixed with zinc hexanitrate to fabricate the ZnONPs. An integrated approach of DIAION HP-20 macroporous resin and sephadex LH-20 column chromatography was adopted to separate and purify alkalescent nucleoside AN03 from Streptomyces koyanogensis. Alkalescent nucleoside was confirmed by the Doskochilova solvent system. The bio-fabricated ZnONPs were characterized by using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and transmission electron microscopy (TEM) analyses. The XRD spectrum and the TEM images confirmed the crystallinity and the spherical shape of the ZnONPs with an average size of 22 nm. FTIR analysis showed the presence of functional groups, which confirmed the bio-fabrication of ZnONPs from alkalescent nucleoside ANO3. In-vitro studies showed that 75 μg/mL of ZnONPs had a strong inhibitory zone (28.39 mm) against the Magnaporthe grisea and significantly suppressed the spore germination. SEM and TEM observations respectively revealed that ZnONPs caused breakage in hyphae and could damage the cells of M. grisea. Greenhouse experiments revealed that the foliar spray of ZnONPs could control the rice blast disease by 98%. Results also revealed that ZnONPs had positive effects on the growth of the rice plant. The present study suggested that ZnONPs could be fabricated from microbe-derived nucleoside antibiotics without facing the problems of metal toxicity and antimicrobial action, thus overcoming the problem of pathogen resistance. This could be a potent biocontrol agent in rice blast disease management.

Rhodiola rosea Reduces Intercellular Signaling in Campylobacter jejuni

Campylobacter jejuni is a major foodborne pathogen and the leading cause of bacterial gastroenteritis, i.e., campylobacteriosis. Besides searching for novel antimicrobials, identification of new targets for their action is becoming increasingly important. Rhodiola rosea has long been used in traditional medicine. Ethanolic extracts from the roots and rhizomes of the plant contain a wide range of bioactive compounds with various pharmacological activities. In this study, cultivated plant materials have been used, i.e., "Mattmark" and "Rosavine". Through optimized protocols, we obtained fractions of the initial ethanolic extracts rich in most important bioactive compounds from R. rosea, including salidroside, rosavins, proanthocyanidins (PACs), and flavonoids. The antimicrobial activity in relation to the chemical composition of the extracts and their fractions was studied with an emphasis on C. jejuni AI-2-mediated intercellular signaling. At concentration 15.625 mg/L, bioluminescence reduction rates varied from 27% to 72%, and the membrane remained intact. Fractions rich in PACs had the strongest antimicrobial effect against C. jejuni, with the lowest minimal inhibitory concentrations (MICs) (M F3 40%: 62.5 mg/L; R F3 40%: 250 mg/L) and the highest intercellular signaling reduction rates (M F3 40%: 72%; R F3 40%: 65%). On the other hand, fractions without PACs were less effective (MICs: M F5 PVP: 250 mg/L; R F5 PVP: 1000 mg/L and bioluminescence reduction rates: M F5 PVP: 27%; R F5 PVP: 43%). Additionally, fractions rich in flavonoids had strong antimicrobial activity (MICs: M F4 70%: 125 mg/L; R F4 70%: 250 mg/L and bioluminescence reduction rates: M F4 70%: 68%; R F4 70%: 50%). We conclude that PACs and flavonoids are crucial compound groups responsible for the antimicrobial activity of R. rosea roots and rhizomes in C. jejuni.

Gallotannin-Enriched Fraction from Quercus infectoria Galls as an Antioxidant and Inhibitory Agent against Human Glioblastoma Multiforme

In recent years, herbal medicine has experienced rapid development in the search for alternative anticancer compounds. Various phytochemicals present in Quercus infectoria (QI) galls have been reported to trigger cytotoxic effects on many types of cancer cells. However, a specific active constituent of QI galls with the potential to inhibit highly invasive stage IV malignant brain tumor, glioblastoma multiforme (GBM), is yet to be discovered. In this study, a two-phase system composed of aqueous soxhlet extraction and methanolic enrichment fractionation was employed to extract an anticancer compound, gallotannin, from the QI galls. This optimized two-phase system successfully generated a fraction (F4) with ~71% gallotannin, verified by the TLC and HPLC assays. Astoundingly, this fraction showed significantly higher (~1.15-fold) antioxidant activities compared to its crude extract, as well as to a commercial synthetic pure gallotannin. The F4 was also found to significantly suppress GBM cell growth, better than the synthetic pure gallotannin and the QI gall crude extract, probably related to its significantly higher antioxidant property. Moreover, the inhibitory effects exerted by the F4 treatment on GBM cells were comparable to the effects of two clinically used chemo-drugs (Temozolomide and Tamoxifen), indicating its high efficiency in combating human cancer. In conclusion, this study pioneered the development of an optimized extraction procedure for enriched yield of the natural gallotannin metabolite from the galls of the QI medicinal plant with high antioxidant potential and inhibitory effects on human GBM cells.

Enrichment and Purification of Aucubin from Eucommia ulmoides Ionic Liquid Extract Using Macroporous Resins

Aiming to address the shortcomings of high-concentration ethanol or methanol extraction solutions that need to be diluted and concentrated prior to use in conventional macroporous resin adsorption approaches, an efficient approach for enrichment and purification of aucubin from the ionic liquid extraction solution of samaras of Eucommia ulmoides was proposed. Among the nine kinds of macroporous resins investigated, the HPD850 resin was found to be the most suitable. Equilibrium adsorption tests were investigated and found to be better fitted by the Langmuir isotherm model. After the dynamic tests on a column packed with HPD850, the optimum operational conditions were as follows: for the absorption process, an initial aucubin concentration of 9.87 mg/L, a sample volume of 13 bed volumes (BV), and a flow rate of 2 BV/h; for the water washing process, 5 BV of deionized water and a flow rate of 3 BV/h; for the ethanol desorption process, a 10–80% ethanol volume fraction as the eluent, 2 BV for each ethanol volume fraction, and a flow rate of 3 BV/h. The 40–80% ethanol volume fraction eluent was collected and concentrated to produce the final products, resulting in an aucubin purity and recovery of 79.41% and 72.92%, respectively.