Development of a Rapid and Simple Method for Preparing Tea-Leaf Saponins and Investigation on Their Surface Tension Differences Compared with Tea-Seed Saponins

Highly efficient isolation and purification of high-purity tea saponins from industrial camellia oil production by porous polymeric adsorbents

BACKGROUND

Recovery of high-purity tea saponin (TS), a promising non-ionic surfactant with well-documented properties, is one of the major challenges to broadening its industrial applications. In this study, an innovative and sustainable strategy for the highly-efficient purification of TS was developed by using well-designed highly-porous polymeric adsorbents.

RESULTS

The prepared Pp-A with controllable macropores (~96 nm) and appropriate surface hydrophobic properties was found more favorable for achieving high adsorption efficiency towards TS/TS-micelles. Kinetic results showed the adsorption follows the pseudo-second-order model (R2  = 0.9800), and the Langmuir model is more qualified to explicate the adsorption isotherms with Qe-TS  ~ 675 mg g-1 . Thermodynamic studies revealed the monolayer adsorption of TS was an endothermic process that was conducted spontaneously. Interestingly, ethanol-driven desorption (90% v/v ethanol) of TS was rapidly (< 30 min) complete due to the possible ethanol-mediated disassembling of TS-micelles. A possible mechanism that involves the interactions between the adsorbents and TS/TS-micelles, the formation and disassembling of TS-micelles was proposed to account for the highly efficient purification of TS. Afterwards, Pp-A-based adsorption method was developed to purify TS directly from industrial camellia oil production. Through selective adsorption, pre-washing, and ethanol-driven desorption, the applied Pp-A enabled the direct isolation of high-purity TS (~96%) with a recovery ratio > 90%. Notably, Pp-A exhibited excellent operational stability and is of high potential for long-term industrial application.

CONCLUSION

Results ensured the practical feasibility of the prepared porous adsorbents in purifying TS, and the proposed methodology is a promising industrial-scale purification strategy. © 2023 Society of Chemical Industry.

Application of Plant Surfactants as Cleaning Agents in Shampoo Formulations

With the increased demand for sustainable, hypoallergenic products, plant surfactants are a promising, eco-friendly option for cleaning products due to their low toxicity or even the absence of toxicity. In the present study, surfactant-rich extracts from Chenopodium quinoa, Glycine max, and Malpighia emarginata were assessed for their stability, antioxidant capacity, toxic potential, and cleaning potential in shampoo formulations. The surfactants in the extracts were isolated and characterized by NMR, UV-Vis, and FTIR spectroscopy. The results demonstrated that the extracts remained stable within the temperature and pH ranges tested. The antioxidant properties were also determined. In the analysis of irritation potential, G. max and C. quinoa exhibited low toxicity and no toxicity, respectively. The cleaning potential analysis confirmed that the extracts could be used as primary surfactants. Seven shampoo formulations were developed, which showed potential to reduce surface tension to the range of 27.1–31.7 mN/m and interfacial tension to the range of 5.4–7.3 mN/m. The wettability, percentage of solids, density, pH, and dirt dispersion of the formulas were within standard ranges, and the sebum removal capacity of the seven formulations was similar to or even better than that of a commercial shampoo.

Quantitative Analysis of Camellia oleifera Seed Saponins and Aqueous Two-Phase Extraction and Separation

At present, the technology used for the extraction and purification of Camellia oleifera saponins generally has the problems of high cost and low purity, and the quantitative detection of Camellia oleifera saponins also has the problems of low sensitivity and easy interference from impurities. To solve these problems, this paper aimed to use liquid chromatography for the quantitative detection of Camellia oleifera saponins, and to adjust and optimize the related conditions. In our study, the average recovery of Camellia oleifera saponins obtained was 100.42%. The RSD of precision test was 0.41%. The RSD of the repeatability test was 0.22%. The detection limit of the liquid chromatography was 0.06 mg/L, and the quantification limit was 0.2 mg/L. In order to improve the yield and purity, the Camellia oleifera saponins were extracted from Camellia oleifera Abel. seed meal by methanol extraction. Then, the extracted Camellia oleifera saponins were extracted with an ammonium sulfate/propanol aqueous two-phase system. We optimized the purification process of formaldehyde extraction and aqueous two-phase extraction. Under the optimal purification process, the purity of Camellia oleifera saponins extracted by methanol was 36.15%, and the yield was 25.24%. The purity of Camellia oleifera saponins obtained by aqueous two-phase extraction was 83.72%. Thus, this study can provide a reference standard for rapid and efficient detection and analysis of Camellia oleifera saponins for industrial extraction and purification.

Eucalyptus saponin- and sophorolipid-mediated desorption of polycyclic aromatic hydrocarbons from contaminated soil and sediment

The potential for biosurfactant-mediated desorption of polyaromatic hydrocarbons (PAHs) was evaluated using PAH-spiked soil and sediment. PAH desorption behaviors and toxicity of novel saponin biosurfactant extracted from Eucalyptus camaldulensis leaves and sophoro-lipid biosurfactant were investigated. Their PAH desorption efficiencies were compared with rhamnolipid biosurfactant and the industrial-chemical surfactant, Tween 20. Based on the emulsification indices, the salt tolerance of surfactants up to 30 g/L NaCl followed the order of saponin > Tween 20 > sophorolipid > rhamnolipid, while the thermal stability over the range of 15 to 50 °C was in the order of sophorolipid > rhamnolipid > saponin > Tween 20. The saponin biosurfactant emulsion demonstrated the highest stability under a wide range of acidic to basic pHs. PAH extraction percentages of saponin and sophorolipid under the optimized surfactant concentration, volume, and incubation time were 30-50% and 30-70%, respectively. PAH desorption capacities of saponin and sophorolipid were comparable to that of rhamnolipid and Tween 20 for all matrices. Sophorolipid more efficiently desorbed low molecular weight PAHs in soil and sediment compared to the other three surfactants. Microbial respiration was used to determine biosurfactant toxicity to the soil/sediment microbiome and indicated no inhibition of respiration during 60 days of incubation, suggesting that sophorolipid- and saponin-mediated remediation may be sustainable approaches to remove PAHs from contaminated soils and sediments.