Production and Characterization of a Bioflocculant Produced by Bacillus salmalaya 139SI-7 and Its Applications in Wastewater Treatment

Identification and characterization of a marine bacterium extract from Mameliella sp. M20D2D8 with antiviral effects against influenza A and B viruses

Despite significant improvements in vaccines and chemotherapeutic drugs, pathogenic RNA viruses continue to have a profound impact on the global economy and pose a serious threat to animal and human health through emerging and re-emerging outbreaks of diseases. To overcome the challenge of viral adaptation and evolution, increased vigilance is required. Particularly, antiviral drugs derived from new, natural sources provide an attractive strategy for controlling problematic viral diseases. In this antiviral study, we discovered a previously unknown bacterium, Mameliella sp. M20D2D8, by conducting an antiviral screening of marine microorganisms. An extract from M20D2D8 exhibited antiviral activity with low cytotoxicity and was found to be effective in vitro against multiple influenza virus strains: A/PR8 (IC50 = 2.93 µg/mL, SI = 294.85), A/Phil82 (IC50 = 1.42 µg/mL, SI = 608.38), and B/Yamagata (IC50 = 1.59 µg/mL, SI = 543.33). The antiviral action was found to occur in the post-entry stages of viral replication and to suppress viral replication by inducing apoptosis in infected cells. Moreover, it efficiently suppressed viral genome replication, protein synthesis, and infectivity in MDCK and A549 cells. Our findings highlight the antiviral capabilities of a novel marine bacterium, which could potentially be useful in the development of drugs for controlling viral diseases.

Microplastics in water: types, detection, and removal strategies

Microplastics are one of the most concerning groups of contaminants that pollute most of the surroundings of the Earth. The abundance of plastic materials available in the environment moved the scientific community in defining a new historical era known as Plasticene. Regardless of their minuscule size, microplastics have posed severe threats to the life forms like animals, plants, and other species present in the ecosystem. Ingestion of microplastics could lead to harmful health effects like teratogenic and mutagenic abnormalities. The source of microplastics could be either primary or secondary in which the components of microplastics are directly released into the atmosphere and the breakdown of larger units to generate the smaller molecules. Though numerous physical and chemical techniques are reported for the removal of microplastics, their increased cost prevents the large-scale applicability of the process. Coagulation, flocculation, sedimentation, and ultrafiltration are some of the methods used for the removal of microplastics. Certain species of microalgae are known to remove microplastics by their inherent nature. One of the biological treatment strategies for microplastic removal is the activated sludge strategy that is used for the separation of microplastic. The overall microplastic removal efficiency is significantly high compared to conventional techniques. Thus, the reported biological avenues like the bio-flocculant for microplastic removal are discussed in this review article.

Bioflocculation characteristics of bound extracellular polymers substances from Pseudomonas sp. XD-3 and behavior of polysaccharides

This study aimed to investigate the bioflocculation characteristics of bound extracellular polymers substances (B-EPS), which were extracted from Pseudomonas sp. XD-3. The flocculation efficiency of B-EPS achieved about 80%- 95% with an initial pH of 4-7, kaolin concentrations of 3-7 g L-1, temperature of 25-100 ℃ and B-EPS dosage of 9-105 mg L-1. The bioflocculation process of B-EPS conformed to pseudo-second-order kinetic mode, suggesting that the bioflocculation belonged to chemical adsorption process. Enzymatic hydrolysis experiments demonstrated that both polysaccharides and proteins were active components for bioflocculation. The polysaccharides were irregular aggregates with rough and porous surfaces and contained hydroxyl and carboxyl groups, which helped to promote bridging effect. Ribose, glucose and galactose were the main monosaccharides of polysaccharides. The molecular weight of the polysaccharides was relatively small, but the relatively loose configuration exposed more ion bridging sites, thus promoting the bioflocculation. Optimizing the ingredients of culture medium and culture time for B-EPS were effective strategies to increase the yield of flocculation active components. When the conditions were 10% of 2 g L-1 KH2PO4 + 5 g L-1 K2HPO4, 0.05% of Tween-80, citrate as carbon source and 32-48 h of culture time, both proteins and polysaccharides in B-EPS were significantly improved. This study gives an in-deep understanding on the flocculation characteristics of a novel bioflocculant from Pseudomonas sp. XD-3, which is conducive to the widespread application of bioflocculation.

Production and characterization of a bioflocculant produced by Proteus mirabilis AB 932526.1 and its application in wastewater treatment and dye removal

Microbial flocculants affect the aggregation of suspended solutes in solutions, thus, they are a viable alternative to inorganic and organic synthetic flocculants which are associated with deleterious health problems. Moreover, a potential solution for wastewater treatment. The study aimed to produce and characterize a bioflocculant from Proteus mirabilis AB 932526.1 and apply it in domestic wastewater treatment and dye removal. The bioflocculant was extracted using butanol and chloroform (5:2 v/v). Carbohydrates, proteins, and uronic acid were identified using phenol-sulphuric acid, Bradford, and Carbazole essays. The morphology, crystallinity and elemental composition of the purified bioflocculant were determined using a Scanning electron microscope (SEM), X-ray diffraction analysis and SEM energy dispersive elemental detector (SEM-EDX). The antimicrobial properties and dye removal efficiencies were evaluated. About 3.8 g/L yields of the purified bioflocculant were attained. Chemical composition analysis revealed the presence of 65 % carbohydrates, 10 % proteins, and 24 % uronic acids. The bioflocculant displayed an amorphous and crystalline structure. Bioflocculant further shows some remarkable properties as they can be able to inhibit the growth of both Gram-positive and Gram-negative microorganisms. The removal efficiencies of 85 % (COD), 82 % (BOD), and 81 % (SO4 2−) in domestic wastewater were achieved. Moreover, the high removal efficiency of staining dyes such as methylene blue (71 %), carbol fuchsin (81 %), safranin (83 %), methylene orange (90 %), and Congo red (90 %) were found. The produced bioflocculant can imply industrial applicability.

A bioflocculant from Corynebacterium glutamicum and its application in acid mine wastewater treatment

Although many microorganisms have been found to produce bioflocculants, and bioflocculants have been considered as attractive alternatives to chemical flocculants in wastewater treatment, there are few reports on bioflocculants from the safe strain C. glutamicum, and the application of bioflocculants in acid wastewater treatment is also rare attributed to the high content of metal ions and high acidity of the water. In this study, a novel bioflocculant produced by Corynebacterium glutamicum Cg1-P30 was investigated. An optimal production of this bioflocculant with a yield of 0.52 g/L was achieved by Box-Behnken design, using 12.20 g/L glucose, 4.00 g/L corn steep liquor and 3.60 g/L urea as carbon and nitrogen source. The structural characterization revealed that the bioflocculant was mainly composed of 37.50% neutral sugar, 10.03% uronic acid, 6.32% aminosugar and 16.51% protein. Carboxyl, amine and hydroxyl groups were the functional groups in flocculation. The biofocculant was thermally stable and dependent on metal ions and acidic pH, showing a good flocculating activity of 91.92% at the dosage of 25 mg/L by aid of 1.0 mM Fe³⁺ at pH 2.0. Due to these unique properties, the bioflocculant could efficiently remove metal ions such as Fe, Al, Zn, and Pb from the real acid mine wastewater sample without pH adjustment, and meanwhile made the acid mine wastewater solution become clear with an increased neutral pH. These findings suggested the great potential application of the non-toxic bioflocculant from C. glutamicum Cg1-P30 in acid mine wastewater treatment.

A review of flocculants as an efficient method for increasing the efficiency of municipal sludge dewatering: Mechanisms, performances, influencing factors and perspectives

Mechanical sludge dewatering is one of the stages of the municipal wastewater treatment process, which allows the amount of generated sludge and the cost of its transport and management to be reduced. Achieving a high degree of dewatering is possible thanks to the use of flocculation technology. The article presents issues related to the theory of flocculation, sewage sludge, and its dewatering. The main mechanisms of flocculation, the kinetics of the process, the division of flocculants, and flocculation in dual systems are discussed. The influence of particular parameters on the efficiency of flocculation and the dewatering of sewage sludge was analyed. The assessed parameters are: pH, the presence of salt, the mixing process, the structure and ionicity of chains, and the dose. The results of experimental studies on the dewatering of various types of sludge were compared. The literature review included in the paper helps to better understand the process of flocculation and sludge dewatering, and presents the progress to date and the possible directions for further development in this field.

Novel Myco-Coagulant Produced by Lentinus squarrosulus for Removal of Water Turbidity: Fungal Identification and Flocculant Characterization

Several river water fungal strains (RWF-1 to RWF-6) were isolated to investigate the potential of having coagulant properties from the metabolites produced by the fungus. The myco-coagulant produced from the liquid-state process was characterized and tested for flocculation of kaolin water. Molecular identification of the fungal strain isolated from river water and characterization of the myco-coagulant produced by the strain are presented in this paper. The genomic DNA of the fungal 18S ribosomal ribonucleic-acid (rRNA) and 28S rRNA genes were used and the species was identified as Lentinus squarrosulus strain 7-4-2 RWF-5. The characterization of myco-coagulant by Fourier-transform infrared spectroscopy (FTIR) showed that hydroxyl, carbonyl, amide and amine groups as principal functional groups were present in the new myco-coagulant. The mean zeta potential value of the myco-coagulant was −7.0 mV while the kaolin solution was −25.2 mV. Chemical analyses of the extracellular myco-coagulant revealed that it contained total sugar (5.17 g/L), total carbohydrate (237 mg/L), protein (295.4 mg/L), glucosamine (1.152 mg/L); and exhibited cellulase activity (20 units/L) and laccase activity (6.22 units/L). Elemental analyses of C, H, O, N and S showed that the weight fractions of each element in the myco-coagulant was 40.9, 6.0, 49.8, 1.7 and 1.4%, respectively. The myco-coagulant showed 97% flocculation activity at a dose of 1.8 mg/L, indicating good flocculation performance compared to that of polyaluminum chloride (PAC). The present work revealed that the fungal strain, L. squarrosulus 7-4-2 RWF-5 is able to produce cationic bio-coagulant. The flocculation mechanism of the novel myco-coagulant was a combination of polymer bridging and charge neutralization.

Isolation, Identification and Characterization of Bioflocculant-Producing Bacteria from Activated Sludge of Vulindlela Wastewater Treatment Plant

The low microbial flocculant yields and efficiencies limit their industrial applications. There is a need to identify bacteria with high bioflocculant production. The aim of this study was to isolate and identify a bioflocculant-producing bacterium from activated sludge wastewater and characterise its bioflocculant activity. The identification of the isolated bacterium was performed by 16S rRNA gene sequencing analysis. The optimal medium composition (carbon and nitrogen sources, cations and inoculum size) and culture conditions (temperature, pH, shaking speed and time) were evaluated by the one-factor-at-a-time method. The morphology, functional groups, crystallinity and pyrolysis profile of the bioflocculant were analysed using scanning electron microscope (SEM), Fourier transform infrared (FTIR) and thermogravimetric (TGA) analysis. The bacterium was identified as Proteus mirabilis AB 932526.1. Its optimal medium and culture conditions were: sucrose (20 g/L), yeast extract (1.2 g/L), MnCl2 (1 g/L), pH 6, 30 °C, inoculation volume (3%), shaking speed (120 rpm) for 72 h of cultivation. SEM micrograph revealed the bioflocculant to be amorphous. FTIR analysis indicated the presence of hydroxyl, carboxyl and amino groups. The bioflocculant was completely pyrolyzed at temperatures above 800 °C. The bacterium has potential to produce bioflocculant of industrial importance.

Preparation of a bacterial flocculant by using caprolactam as a sole substrate and its application in amoxicillin removal

High cost is one of the limiting factors in the industrial production of bioflocculant. Simultaneous preparation of bioflocculant from the contaminants in wastewater was considered as a potential approach to reduce the production cost. In this study, caprolactam was verified as sole feedstock for the growth of strain Alcaligenes faecalis subsp. phenolicus ZY-16 in batch experiments. Chemical analysis showed that the as-prepared MBF-16 consisted of heteropolysaccharides (88.3%) and peptides (9.4%). XPS result indicated the plentiful acylamino, hydroxyl and amino groups in MBF-16, which have an indispensable role in amoxicillin flocculation. The flocculation of amoxicillin can be well stimulated by Freundlich isotherm equation, and the Kf was up to 178.6524 for amoxicillin. The kinetic fitting results proved that the flocculation of amoxicillin by MBF-16 was chemisorbed. This contribution may develop a novel technology for the preparation of bacterial flocculants that can consume toxic substrates (caprolactam) and have potential applications in amoxicillin removal.

Wastewater treatment using plant-derived bioflocculants: green chemistry approach for safe environment

The rapid expansion of global trade and human activities has resulted in a massive increase in wastewater pollution into the atmosphere. Suspended solids, organic and inorganic particles, dissolved solids, heavy metals, dyes, and other impurities contained in wastewater from various sources are toxic to the atmosphere and pose serious health risks to humans and animals. Coagulation-flocculation technology is commonly used in wastewater treatment to remove cell debris, colloids, and contaminants in a comfortable and effective manner. Flocculants, both organic and inorganic, have long been used in wastewater treatment. However, because of their low performance, non-biodegradability, and associated health risks, their use has been limited. The use of eco-friendly bioflocculants in wastewater treatment has become essential due to the health implications of chemical flocculants. Because of their availability, biodegradability, and protection, plant-derived coagulants/flocculants and plant-based grafted bioflocculants have recently made significant progress in wastewater treatment. This study will undoubtedly provide a clearer understanding of the current state, challenges, and solutions for bioflocculation in wastewater remediation using green materials for the sake of a cleaner climate.

Energy-saving preparation of a bioflocculant under high-salt condition by using strain Bacillus sp. and the interaction mechanism towards heavy metals

A highly efficient bioflocculant, i.e., Na-Bsp was successfully prepared by using a tolerant strain-Bacillus sp. under high-salt condition without sterilization. Salt-containing medium was not infected by other strains throughout the whole incubation period in 168 h. The as-prepared Na-Bsp was found to be cation-dependent, exhibiting high flocculant efficiency (FE) i.e., 97.69 ± 0.61%, towards kaolin particles by aid of Fe³⁺. High FE values were well maintained under a wide pH range and/or boiled water treatment, likely because of the main constituent of polysaccharide. The presence of hydroxyl, carboxyl, and amine groups on the bioflocculant surface were possibly responsible for strong interactions with heavy metals. The adsorption capacities of Pb²⁺, Cu²⁺ and Cr⁶⁺ were 1000.0, 434.8 and 384.6 mg g^-1, respectively. The changing of structure and configuration of bioflocculant during the metal adsorption were explored by the scanning electron microscope with electron energy loss spectroscopy and three-dimensional excitation-emission fluorescence spectrometry. This study provided a novel production method, whereby the conventional sterilization could be avoided, which is of great environmental significance for steam-saving. Furthermore, the as-prepared Na-Bsp exhibited high adsorption capacities toward heavy metals, which sheds lights on its potential usage as an alternative adsorbent.

Distribution and Characterization of Actinomycetes in Mangrove Habitats (Red Sea, Egypt) with Special Emphasis on Streptomyces mutabilis M3MT483919

Ten sediment samples were gathered from several geographical locations around mangrove habitat, Red Sea coast, Egypt, during summer 2019. Actinobacteria are widespread in most mangrove soil samples. The average actinomycetes counts in sediment samples were ranged from 4 to 15 CFUg-1, also physico-chemical characters for soil samples were determined. Statistical analysis was applied to assess if the geographical location and physico-chemical characters influenced the communities of actinomycetes. A total of 10 actinomycetes were isolated and characterized physiologically and biochemically. The antimicrobial activities of different actinomycetes isolates were assessed. Isolate M3 was chosen as the most promising isolate with broad antagonistic activity against Bacillus subtilis ATCC 6633, Escherichia coli ATCC 19404, Staphylococcus aureus ATCC6538, Pseudomonas aeruginosa ATCC 9027, and Candida albicans ATCC 10231 with inhibition zones ranged from 12.0 ± 0.9 to 20.0 ± 1.9 mm. Genotypic characterization of isolate M3 was made using 16S rDNA sequence analysis and identified as Streptomyces mutabilis M3 with accession number MT483919. This strain exhibited anticancer activity against breast cancer cell line (Mcf7), liver cancer cell line (HepG2) and colon cancer cell line (HCT116) and the IC50 values were 324.77, 333.71 and 354.46, respectively. Streptomyces mutabilis M3 MT483919 had high bio-flocculating activity for seawater treatment, and the recovery of the samples ranged between 71.97 and 76.05%. The crude extract of Streptomyces mutabilis MT483919 M3 was analyzed by Fourier transform infrared spectrum (FT-IR) and Gas chromatography-mass spectrometry (GC-MS).

Biogenic Silver Nanoparticles Synthesis from New Record Aquatic Bacteria of Nile Tilapia and Evaluation of their Biological Activity

The current study investigates the isolation identification of bioactive strain from fish collected from El-Burrllus region in Egypt. The objective of the current study is to identify and assess the biological profile of a new record strain in Egypt Bacillus maritimus. The molecular identification of the selected promising isolate and phylogenetic analysis confirmed the accurate identity of the isolate as Bacillus maritimus. The novelty of the present study was not due to only to the fact that the Bacillus maritimus isolate was the first record from brackish-water Egyptian fish gut, but also due to the fact that there is no previous study on the bioactivity of Bacillus maritimus and their efficiency as biogenic nanoparticles synthesis. The bioactivities for the Bacillus maritimus were investigated through different biochemical assays as antioxidant, anti-inflammatory and antimicrobial activity against six of the tested human pathogens namely; Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 8739, Enterococcus faecalis ATCC 29212, Pseudomonas aeruginosa ATCC 15442, Klebsiella pneumoniae ATCC 13883 and Streptococcus pyogenes ATCC 19615. Bacillus maritimus bacteria were grown in nutrient broth for 24 h at 37°C and the optical density was determined at 600 nm using the UV-visible spectrophotometer. The optical density (OD) of the broth was adjusted to 0.5 with sterile phosphate-buffered saline, pH 7.4 (PBS). the bacterial isolate showed antioxidant, and anti-inflammatory activities. In addition the bacteria showed great reducing agent ability as a biogenic agent for the silver nanoparticles. The phytochemical screening of the Bacillus maritimus isolates have showed varieties of bioactive groups in addition to total phenolic compounds, flavonoids, tannic acid, carbohydrates, sulfated polysaccharides, total proteins and lipids. This study highlighted also that the Bacillus maritimus isolate could also produce novel secondary metabolites. The current study report for the first time the Bacillus maritimus in Egypt. Further studies are needed to isolate and characterize more bioactive strains from Egyptian Fishes that could possibly act as novel bioactive compounds source of medical and agricultures importance.

Challenges and Opportunities of Biocoagulant/Bioflocculant Application for Drinking Water and Wastewater Treatment and Its Potential for Sludge Recovery

The utilization of metal-based conventional coagulants/flocculants to remove suspended solids from drinking water and wastewater is currently leading to new concerns. Alarming issues related to the prolonged effects on human health and further pollution to aquatic environments from the generated nonbiodegradable sludge are becoming trending topics. The utilization of biocoagulants/bioflocculants does not produce chemical residue in the effluent and creates nonharmful, biodegradable sludge. The conventional coagulation-flocculation processes in drinking water and wastewater treatment, including the health and environmental issues related to the utilization of metal-based coagulants/flocculants during the processes, are discussed in this paper. As a counterpoint, the development of biocoagulants/bioflocculants for drinking water and wastewater treatment is intensively reviewed. The characterization, origin, potential sources, and application of this green technology are critically reviewed. This review paper also provides a thorough discussion on the challenges and opportunities regarding the further utilization and application of biocoagulants/bioflocculants in water and wastewater treatment, including the importance of the selection of raw materials, the simplification of extraction processes, the application to different water and wastewater characteristics, the scaling up of this technology to a real industrial scale, and also the potential for sludge recovery by utilizing biocoagulants/bioflocculants in water/wastewater treatment.

Marine Actinobacteria Bioflocculant: A Storehouse of Unique Biotechnological Resources for Wastewater Treatment and Other Applications

The bioactive compounds produced by actinobacteria have played a major role in antimicrobials, bioremediation, biofuels, enzymes, and anti-cancer activities. Biodegradable microbial flocculants have been produced by bacteria, algae, and fungi. Microbial bioflocculants have also attracted biotechnology importance over chemical flocculants as a result of degradability and environmentally friendly attributes they possess. Though, freshwater actinobacteria flocculants have been explored in bioflocculation. Yet, there is a paucity of information on the application of actinobacteria flocculants isolated from the marine environment. Similarly, marine habitats that supported the biodiversity of actinobacteria strains in the field of biotechnology have been underexplored in bioflocculation. Hence, this review reiterates the need to optimize culture conditions and other parameters that affect bioflocculant production by using a response surface model or artificial neural network.

Mercury detoxification by absorption, mercuric ion reductase, and exopolysaccharides: a comprehensive study

Mercury (Hg), the environmental toxicant, is present in the soil, water, and air as it is substantially distributed throughout the environment. Being extremely toxic even at low concentration, its remediation is utterly important. Therefore, it is necessary to detoxify the contaminant within the acceptable limits before threatening the environment. Although various conventional methods are being used, irrespective of high cost, it produces intermediate toxic by-product too. Biological methods are eco-friendly, clean, greener, and safer for the remediation of heavy metals corresponding to the conventional remediation due to their economic and high-tech constraints. Bioremediation is now being used for Hg (II) removal, which involves biosorption and bioaccumulation mechanisms or both, also mercuric ion reductase, exopolysaccharide play significant role in detoxification of mercury by acting a potential instrument for the remediation of heavy metals. In this review paper, we shed light on problems caused by mercury pollution, mercury cycle, and its global scenario and detoxification approaches by biological methods and result found in the literature.

Wastewater Treatment by a Polymeric Bioflocculant and Iron Nanoparticles Synthesized from a Bioflocculant

Wastewater remains a global challenge. Various methods have been used in wastewater treatment, including flocculation. The aim of this study was to synthesize iron nanoparticles (FeNPs) using a polymeric bioflocculant and to evaluate its efficacy in the removal of pollutants in wastewater. A comparison between the efficiencies of the bioflocculant and iron nanoparticles was investigated. A scanning electron microscope (SEM) equipped with an energy-dispersive X-ray analyzer (EDX) and Fourier transform-infrared (FT-IR) spectroscopy were used to characterize the material. SEM-EDX analysis revealed the presence of elements such as O and C that were abundant in both samples, while FT-IR studies showed the presence of functional groups such as hydroxyl (–OH) and amine (–NH₂). Fe nanoparticles showed the best flocculation activity (FA) at 0.4 mg/mL dosage as opposed to that of the bioflocculant, which displayed the highest flocculation activity at 0.8 mg/mL, and both samples were found to be cation-dependent. When evaluated for heat stability and pH stability, FeNPs were found thermostable with 86% FA at 100 °C, while an alkaline pH of 11 favored FA with 93%. The bioflocculant flocculated poorly at high temperature and was found effective mostly at a pH of 7 with over 90% FA. FeNPs effectively removed BOD (biochemical oxygen demand) and COD (chemical oxygen demand) in all two wastewater samples from coal mine water and Mzingazi River water. Cytotoxicity results showed both FeNPs and the bioflocculant as nontoxic at concentrations up to 50 µL.

Review of Potential Microbial Effects on Flotation

Microorganisms enter the flotation process mainly from intake water and ore material. The diversity and number of microorganisms can vary significantly from mine to mine. In flotation, the conditions including oxygen levels, temperature, and nutrients from ore, intake water, and reagents are often favorable for the microbial growth. The mining industry aims to close the water loops, which is expected to result in the accumulation of microorganisms in the process waters with potential effects on flotation performance. Bioflotation, bioleaching, and bio-oxidation have been studied for decades as tools for concentrating and dissolving minerals. In contrast, there is limited scientific literature or industrial knowledge about microorganisms that naturally inhabit and prevail in minerals processing applications over a wide pH range. Microorganisms affect minerals when they selectively attach to the surfaces, produce extracellular polymeric substances (EPS) and polysaccharides, oxidize or reduce the minerals, change the pH and Eh of the process solution, and degrade organic flotation chemicals. Microorganisms contain different structural components that affect their surface chemistry, charge, and behavior in flotation, but these properties may also change via adaptation and solution conditions. Almost all studies on flotation have focused on chemical and physical parameters, and the role of naturally occurring microorganisms has remained underexplored. Advances in genomics and proteomics offer possibilities to describe not only which microorganisms are present, but also which physiological functions are being exercised. This article reviews the current knowledge of microorganisms in various mineral processes, identifies potential microbe–mineral interactions in flotation, describes the gaps in current knowledge, and concludes with the potential effects of microorganisms on flotation, especially in closed water loops.

Natural polymer matrix as safe flocculant to remove turbidity from kaolin suspension: Performance and governing mechanism

Conventional flocculants bear environmental and health concerns which could be avoided by applying natural materials, particularly polysaccharide and glycoprotein-containing ones. In the present study, yeast cell wall (YCW), a natural polymer matrix, was used as natural flocculant. To prepare YCW, Saccharomyces cerevisiae was cultivated in bench scale fermenter. After characterization, YCW was employed as anionic flocculant in jar tests to remove turbidity from kaolin suspensions at different conditions where either alum or poly aluminum chloride (PAC) was coagulant. Generally, the lower coagulant consumption, higher turbidity removal or faster sedimentation was observed by using YCW as flocculant. The developed flocculant was more effective in the presence of PAC compared to alum. At best, by applying 300 mg/L YCW, the highest turbidity removals of 98 and 97% were achieved using 10 ppm PAC at pH 6.5 and 50 ppm alum at pH 7.5, respectively. The presence of the flocculant in the structure of the flocs was proved by FTIR analysis. The final pH of the treated suspensions was suitable for discharge purpose without the need for neutralization. The excess positive charge neutralization and bridging were the governing mechanism in coagulation-flocculation process. YCW with proper performance, GRAS designation and readily availability can be considered as natural alternative to chemical anionic flocculants where the process needs safe compounds.

Selecting Bacteria Candidates for the Bioaugmentation of Activated Sludge to Improve the Aerobic Treatment of Landfill Leachate

In this study, a multifaceted approach for selecting the suitable candidates for bioaugmentation of activated sludge (AS) that supports leachate treatment was used. To determine the exploitation of 10 bacterial strains isolated from the various matrices for inoculating the AS contaminated with the Kalina pond leachate (KPL), their degradative potential was analyzed along with their aptitude to synthesize compounds improving remediation of pollutants in wastewater and ability to incorporate into the AS flocs. Based on their capability to degrade aromatic compounds (primarily catechol, phenol, and cresols) at a concentration of 1 mg/mL and survive in 12.5% of the KPL, Pseudomonas putida OR45a and P. putida KB3 can be considered to be the best candidates for bioaugmentation of the AS among all of the bacteria tested. Genomic analyses of these two strains revealed the presence of the genes encoding enzymes related to the metabolism of aromatic compounds. Additionally, both microorganisms exhibited a high hydrophobic propensity (above 50%) and an ability to produce biosurfactants as well as high resistance to ammonium (above 600 µg/mL) and heavy metals (especially chromium). These properties enable the exploitation of both bacterial strains in the bioremediation of the AS contaminated with the KPL.

Subtopic: Advances in water and wastewater treatment harvesting of Chlorella sp. microalgae using Aspergillus niger as bio-flocculant for aquaculture wastewater treatment

Microalgae have been increasingly used to generate biofuel, thus a sustainable technique should be implemented to harvest the biomass to ensure its existence in the environment. Aspergillus niger was used as bio-flocculant to harvest microalgae from aquaculture wastewater via flocculation technique over a range of pH and mixing rate. The bio-flocculant showed ability to adapt at a wide range of pH from 3.0 to 9.0 and at a mixing rate of 100-150 rpm, producing a harvesting efficiency of higher than 90%. The treated water possessed low concentration of chlorophyll-a (0.3-0.6 mg L^-1) and cell density (2 × 10⁶-3 × 10⁶ cell mL^-1). These indicate that Aspergillus niger is a promising bio-flocculant to be used in harvesting microalgae, thus promoting the use of flocculation as a green technology in aquaculture wastewater treatment.

Removal of Pollutants in Mine Wastewater by a Non-Cytotoxic Polymeric Bioflocculant from Alcaligenes faecalis HCB2

Bioflocculation is a physicochemical technique often employed to efficiently remove colloidal water pollutants. Consequently, in this study, a bioflocculant was produced, characterised and applied to remove pollutants in mine wastewater. The maximum flocculation activity of 92% was recorded at 30 °C, pH 9.0 when maltose and urea were used as energy sources and 72 h of fermentation at the inoculum size of 1% (v/v). K⁺ proved to be a favourable cation. The bioflocculant yield of 4 g/L was obtained. Scanning electron microscopy illustrated a hexagonal-like structure of the bioflocculant. It is composed of carbohydrates and proteins in mass proportion of 88.6 and 9.5%, respectively. The Fourier transform infrared spectrum revealed the presence of hydroxyl, amide and amino functional groups. More than 73% of the bioflocculant was obtained after exposure to 600 °C using the thermogravimetric analyser. Human embryonic kidney 293 (HEK 293) cells exhibited 95% viability after being treated with 200 µg/µL of the bioflocculant. The flocculation mechanisms were proposed to be as a result of a double layer compression by K⁺, chemical reactions and bridging mechanism. The removal efficiencies of 59, 72, and 75% on biological oxygen demand, chemical oxygen demand and sulphur, were obtained respectively. Thus, the bioflocculant have potential use in wastewater treatment.

A novel efficient bioflocculant QZ-7 for the removal of heavy metals from industrial wastewater

In this study, a novel bioflocculant QZ-7 was produced from Bacillus salmalaya 139SI for industrial wastewater treatment. Biochemical analysis, FTIR, scanning electron microscopy-energy dispersive X-ray spectroscopy, and thermogravimetric analysis were performed. A synthetic wastewater sample was used to validate the performance of the prepared OZ-7 for the adsorption efficiency of As, Zn²⁺ Pb²⁺, Cu²⁺, and Cd²⁺ under optimal experimental conditions such as initial metal concentrations, pH, contact time (h) and QZ-7 adsorbent dosage (mg mL⁻¹). The maximum removal efficiency for Zn²⁺ (81.3%), As (78.6%), Pb²⁺ (77.9%), Cu²⁺ (76.1%), and Cd²⁺ (68.7%) was achieved using an optimal bioflocculant dosage of 60 mg L⁻¹ at 2 h shaking time, 100 rpm and pH 7. Furthermore, the obtained optimum experimental conditions were validated using real industrial wastewater and the removal efficiencies of 89.8%, 77.4% and 58.4% were obtained for As, Zn²⁺ and Cu²⁺, respectively. The results revealed that the prepared bioflocculant QZ-7 has the capability to be used for the removal of heavy metals from industrial wastewater.

In this study, a novel bioflocculant was produced using Bacillus salmalaya 139SI for industrial waste water treatment.