The Impact of Processing Parameters on the Content of Phenolic Compounds in New Gluten-Free Precooked Buckwheat Pasta

The Influence of Polyphenols on Atherosclerosis Development

Polyphenols have attracted tremendous attention due to their pro-health properties, including their antioxidant, anti-inflammatory, antibacterial and neuroprotective activities. Atherosclerosis is a vascular disorder underlying several CVDs. One of the main risk factors causing atherosclerosis is the type and quality of food consumed. Therefore, polyphenols represent promising agents in the prevention and treatment of atherosclerosis, as demonstrated by in vitro, animal, preclinical and clinical studies. However, most polyphenols cannot be absorbed directly by the small intestine. Gut microbiota play a crucial role in converting dietary polyphenols into absorbable bioactive substances. An increasing understanding of the field has confirmed that specific GM taxa strains mediate the gut microbiota-atherosclerosis axis. The present study explores the anti-atherosclerotic properties and associated underlying mechanisms of polyphenols. Moreover, it provides a basis for better understanding the relationship between dietary polyphenols, gut microbiota, and cardiovascular benefits.

Identification and Bioaccessibility of Maillard Reaction Products and Phenolic Compounds in Buckwheat Biscuits Formulated from Flour Fermented by Rhizopus oligosporus 2710

The identification and potential bioaccessibility of phenolic compounds using the highly sensitive micro-HPLC-QTRAP/MS/MS technique and Maillard reaction products (MRPs) in buckwheat biscuits formulated from flours, raw and roasted, fermented by Rhizopus oligosporus 2710 was addressed in this study after in vitro digestion. The content of the analyzed MRPs such as furosine, FAST index, and the level of melanoidins defined by the browning index was increased in the biscuits prepared from fermented flours as compared to the control biscuits prepared from non-fermented ones. After in vitro digestion higher content of furosine was observed in control and tested biscuits providing its high potential bioaccessibility. The fermented buckwheat flours used for baking affected the nutritional value of biscuits in comparison to the control biscuits in the context of the twice-increased FAST index. More than three times higher value of the browning index was noted in control and tested biscuits after digestion in vitro indicating the high bioaccessibility of melanoidins. Our results showed the presence of ten phenolic acids and eight flavonoids in the investigated biscuits. Among phenolic acids, vanillic, syringic, and protocatechuic were predominant while in the group of flavonoids, rutin, epicatechin, and vitexin were the main compounds in analyzed biscuits. Generally, the lower potential bioaccessibility of phenolic acids and higher potential bioaccessibility of flavonoids was found for biscuits obtained from buckwheat flours fermented by fungi compared to control biscuits obtained from non-fermented flours. Fermentation of buckwheat flour with the fungus R. oligosporus 2710 seems to be a good way to obtain high-quality biscuits; however, further research on their functional properties is needed.

Fortification of ready-to-eat extruded snacks with tree bean powder: nutritional, antioxidant, essential amino acids, and sensory properties

Nutrition-rich extruded snacks were developed from a mixture of cornflour, Bengal gram flour fortified by tree bean (TB) powder (0, 5, and 10%) using a twin-screw extruder. The nutritional, antioxidant, and amino acid profile and structural, functional, and sensory properties of the ready-to-eat (RTE) extruded snacks were evaluated. Ash, protein, and fiber content in TB-fortified extrudates were increased, whereas nitrogen-free extract was decreased. Total phenolics (2.34 mg g^-1 FW), ascorbate (2.23 mg g^-1 FW), total flavonoids (0.16 mg g^-1 FW), and reduced glutathione (8.53 µM g^-1 FW) were higher in the extrudates with 10% TB powder. Similarly, RTE extruded snacks fortified by 10% TB exhibited higher DPPH, FRAP, ABTS, hydroxyl radical activities, reducing power, and essential amino acids, such as lysine, leucine, isoleucine, cysteine, threonine, tyrosine, and methionine derived by HPLC. Extrudates fortified by 5% TB powder exhibited better microstructure through scanning electron microscopy. However, 10% TB powder possessed higher physicochemical properties and overall sensory attributes. This study reveals the tremendous industrial potential of nutrient-rich RTE extruded snacks fortified by underutilized TB (10%).

Graphic abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-021-05251-w.

Effect of Moisture Distribution Changes Induced by Different Cooking Temperature on Cooking Quality and Texture Properties of Noodles Made from Whole Tartary Buckwheat

While precooking and processing have improved the quality of gluten-free noodles, the effects of different cooking temperatures on their quality—neither gluten-free noodles nor whole Tartary buckwheat noodles—have rarely been clarified. This study investigated the key role of moisture distribution induced by different cooking temperatures in improving the noodle quality of whole Tartary buckwheat. The results showed that cooking temperatures higher than 70 °C led to a sharp increase in cooking loss, flavonoid loss and the rate of broken noodles, as well as a sharp decrease in water absorption. Moreover, the noodles cooked at 70 °C showed the lowest rate of hardness and chewiness and the highest tensile strength of all cooking temperatures from 20 °C to 110 °C. The main positive attribute of noodles cooked at 70 °C might be their high uniform moisture distribution during cooking. Cooking at 70 °C for 12 min was determined as the best condition for the quality improvement of whole Tartary buckwheat noodles. This is the first study to illustrate the importance of cooking temperatures on the quality of Tartary buckwheat noodles. More consideration must also be given to the optimal cooking conditions for different gluten-free noodles made from minor coarse cereals.

Changes in Phenolics during Cooking Extrusion: A Review

In this paper, significant attention is paid to the retention of phenolics in extrudates and their health effects. Due to the large number of recent articles devoted to total phenolic content (TPC) of input mixtures and extrudates, the technological changes are only presented for basic raw materials and the originating extrudates, and only the composites identified has having the highest amounts of TPC are referred to. The paper is also devoted to the changes in individual phenolics during extrusion (phenolic acids, flavonoids, flavonols, proanthocyanidins, flavanones, flavones, isoflavons, and 3-deoxyanthocyanidins). These changes are related to the choice or raw materials, the configuration of the extruder, and the setting the technological parameters. The results found in this study, presented in the form of tables, also indicate whether a single-screw or twin-screw extruder was used for the experiments. To design an extrusion process, other physico-chemical changes in the input material must also be taken into account, such as gelatinization of starch; denaturation of protein and formation of starch, lipids, and protein complexes; formation of soluble dietary fiber; destruction of antinutritional factors and contaminating microorganisms; and lipid oxidation reduction. The chemical changes also include starch depolymerization, the Maillard reaction, and decomposition of vitamins.

Phytochemicals and Antioxidant Activity in Oat-Buckwheat Dough and Cookies with Added Spices or Herbs

The aim of this study was to determine the phytochemicals and antioxidant activity in oat-buckwheat doughs and cookies with the addition of ten selected spices or herbs (2 g/100 g flours weight basis). The used spices and herbs, as was expected, showed a wide range of bioactive molecules, namely phenolic acids and flavonoids, and they are a rich source of components with antioxidant potential. All analysed oat-buckwheat dough showed higher antioxidant activity potential and higher total phenolic content (TPC) compared to cookies. The highest TPC was found in clove, both dough and cookies, with its addition showing the highest ferric reducing antioxidant power. Generally, cookies with the addition of spice/herbs showed higher phytochemical contents and antioxidant activity compared to oat-buckwheat cookies without the condiment. The technology of obtaining confectionery products, like oat-buckwheat cookies, that will favor the protection of bioactive compounds should still be improved.

Phenolic Compounds and Bioaccessibility Thereof in Functional Pasta

Consumption of food products rich in phenolic compounds has been associated to reduced risk of chronic disease onset. Daily consumed cereal-based products, such as bread and pasta, are not carriers of phenolic compounds, since they are produced with refined flour or semolina. Novel formulations of pasta have been thus proposed, in order to obtain functional products contributing to the increase in phenolic compound dietary intake. This paper aims to review the strategies used so far to formulate functional pasta, both gluten-containing and gluten-free, and compare their effect on phenolic compound content, and bioaccessibility and bioavailability thereof. It emerged that whole grain, legume and composite flours are the main substituents of durum wheat semolina in the formulation of functional pasta. Plant by-products from industrial food wastes have been also used as functional ingredients. In addition, pre-processing technologies on raw materials such as sprouting, or the modulation of extrusion/extrusion-cooking conditions, are valuable approaches to increase phenolic content in pasta. Few studies on phenolic compound bioaccessibility and bioavailability in pasta have been performed so far; however, they contribute to evaluating the usefulness of strategies used in the formulation of functional pasta.

Rice-Buckwheat Gluten-Free Pasta: Effect of Processing Parameters on Quality Characteristics and Optimization of Extrusion-Cooking Process

A new type of gluten-free pasta has been developed based on a rice-buckwheat mixture. The aim of the study was to investigate the effect of process parameters of moisture content (30, 33, and 36%), barrel temperature (80, 100, and 120 °C), and screw speed (60, 80, and 100 rpm) on cooking and textural properties of rice-buckwheat pasta produced by a single-screw extrusion-cooker. The process uses response surface methodology based on a Box-Behnken experimental design. Results showed that with regard to this rice-buckwheat pasta, raising moisture content of the raw materials increased cooking loss and stickiness, but decreased firmness, while increasing barrel temperature reduced cooking loss and stickiness, but increased hardness and firmness. Screw speed increase also affected positively hardness and firmness of the obtained products. Thus, optimal conditions (moisture content 30%, barrel temperature 120 °C, and screw speed 80 rpm) were established to produce good quality rice-buckwheat pasta. At this optimum, the pasta showed a compact and homogeneous inside microstructure. Furthermore, the pasta products exhibited low cooking loss (less than 6%), good hardness and firmness, with low stickiness and acceptable scores for all sensory attributes and for overall quality.