Enhanced Enzymatic Hydrolysis of Pennisetum alopecuroides by Dilute Acid, Alkaline and Ferric Chloride Pretreatments

Tobacco as bioenergy and medical plant for biofuels and bioproduction

Tobacco, a widely cultivated crop, has been extensively utilized by humans for an extended period. However, the tobacco industry generates a significant amount of organic waste, and the effective utilization of this tobacco waste has been limited. Currently, most tobacco waste is either recycled as reconstituted tobacco sheets or disposed of in landfills. However, tobacco possesses far more potential value than just these applications. This article provides an overview of the diverse uses of tobacco waste in agriculture, medicine, chemical engineering, and energy sectors. In the realm of agriculture, tobacco waste finds primary application as fertilizers and pesticides. In medical applications, the bioactive compounds present in tobacco are fully harnessed, resulting in the production of phenols, solanesol, polysaccharides, proteins, and even alkaloids. These bioactive compounds exhibit beneficial effects on human health. Additionally, the applications of tobacco waste in chemical engineering and energy sectors are centered around the utilization of lignocellulosic compounds and certain fuels. Chemical platform compounds derived from tobacco waste, as well as selected fuel sources, play a significant role in these areas. The rational utilization of tobacco waste represents a promising prospect, particularly in the present era when sustainable development is widely advocated. Moreover, this approach holds significant importance for enhancing energy utilization.

The Influence of Cadmium on Fountain Grass Performance Correlates Closely with Metabolite Profiles

The relationship between metabolite changes and biological endpoints in response to cadmium (Cd) stress remains unclear. Fountain grass has good Cd enrichment and tolerance abilities and is widely used in agriculture and landscaping. We analyzed the metabolic responses by detecting the metabolites through UPLC-MS and examined the relationships between metabolite changes and the characteristics of morphology and physiology to different Cd stress in fountain grass. Our results showed that under Cd stress, 102 differential metabolites in roots and 48 differential metabolites in leaves were detected, with 20 shared metabolites. Under Cd stress, most of the carbohydrates in leaves and roots decreased, which contributed to the lowered leaf/root length and fresh weight. In comparison, most of the differential amino acids and lipids decreased in the leaves but increased in the roots. Almost all the differential amino acids in the roots were negatively correlated with root length and root fresh weight, while they were positively correlated with malondialdehyde content. However, most of the differential amino acids in the leaves were positively correlated with leaf length and leaf fresh weight but negatively correlated with malondialdehyde content. Metabolic pathway analysis showed that Cd significantly affects seven and eight metabolic pathways in the leaves and roots, respectively, with only purine metabolism co-existing in the roots and leaves. Our study is the first statement on metabolic responses to Cd stress and the relationships between differential metabolites and biological endpoints in fountain grass. The coordination between various metabolic pathways in fountain grass enables plants to adapt to Cd stress. This study provides a comprehensive framework by explaining the metabolic plasticity and Cd tolerance mechanisms of plants.

Surfactant-assisted alkaline pretreatment and enzymatic hydrolysis of Miscanthus sinensis for enhancing sugar recovery with a reduced enzyme loading

Surfactants play a vital role in the delignification and saccharification of lignocellulosic biomass. A strategy for coupling surfactant-assisted alkaline pretreatment (SAP) with surfactant-assisted enzymatic hydrolysis (SEH) has been proposed for improving sugar recovery from a potential energy crop, Miscanthus sinensis. Poly (ethylene glycol) 2000 (PEG 2000) was found to be more efficient in SAP than in other tested surfactants. Compositional and structural analysis revealed that the SAP process with 1% of PEG 2000 produced more efficient lignin removal and microstructure disruption of the pretreated sample, thus indicating much higher reducing sugar yields of 544.4–601.2 mg/g compared to the samples that were untreated or pretreated by alkali alone. Moreover, SEH with 1% Tween 80, which could block the lignin-enzyme interactions, produced a substantial reduction of 33.3% in the enzyme loading to achieve a higher sugar recovery from the SAP sample.

Novel insight on ferric ions addition to mitigate recalcitrant formation during thermal-alkali hydrolysis to enhance biomethanation

Thermal-chemical pre-treatment has proven to facilitate the solubilization of organics and improvement in biogas generation from the organic fraction of municipal solid waste (OFMSW). However, the production of recalcitrant is inevitable when OFMSW is pretreated at high temperatures and alkali dosage. This study develops a strategy to use Fe³⁺ to reduce the formation of recalcitrant compounds, i.e., 5-HydroxyMethyl Furfural (5-HMF), furfurals, and humic acids (HA) during thermal-alkali pre-treatment. It was postulated that the formation of the recalcitrant compound during pre-treatment can be reduced by Fe³⁺ dosing to oxidize intermediates of Maillard reactions. A decrease in 5-HMF (45-49%) and furfurals (54-66%) was observed during Fe³⁺ (optimum dose: 10 mg/L) mediated thermal-alkali pre-treatment owing to the Lewis acid behavior of FeCl₃. The Fe³⁺ mediated assays show a substantial improvement in VS removal (28%) and biogas yield, i.e., 31% (292 mL/gVS_added) in 150 °C + 3 g/L NaOH, 34% (316 mL/gVS_added) in 175 °C + 3 g/L NaOH, and 36% (205 mL/gVS_added) in 200 °C + 3 g/L NaOH assays, over their respective controls (no Fe³⁺ dosing). The reducing property of Fe³⁺ rendered a low ORP (-345 mV) in the system than control, which is beneficial to the anaerobic microbiome. Electrical conductivity (EC) also shows a three-fold increase in Fe³⁺ mediated assays over control, promoting direct interspecies electron transfer (DIET) amongst microbes involved in the electrical syntrophy. The score plot and loading plots from principal component analysis (PCA) showed that the results obtained by supplementing 10 mg/L Fe³⁺ at 150, 175, and 200 °C were significantly different. The correlation of the operational parameters was also mutually correlated. This work provides a techno-economically and environmentally feasible option to mitigate the formation of recalcitrant compounds and enhance biogas production in downstream AD by improving the degradability of pretreated substrate.

Hierarchical porous activated carbon from waste Zanthoxylum bungeanum branches by modified H3PO4 activation for toluene removal in air

Activated carbon adsorbents were prepared by chemical activation with waste Zanthoxylum bungeanum branches as raw materials and H₃PO₄/H₂SO₄ as composite activator under different dosages of the auxiliary activator H₂SO₄. The prepared samples were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) specific surface area test, Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The adsorption/desorption performances of low concentration toluene in the air were evaluated, and its reusability was evaluated by the adsorption/desorption cycle. Adsorption results were fitted using the quasi-first, quasi-second, and Bangham models. The adsorption properties of activated carbon adsorbent for toluene in the air show a "volcanic-type change trend" with the increase of H₂SO₄ dosage. The toluene adsorption properties of the prepared activated carbon adsorbents from high to low are as follows: BAC02 > BAC05 > BAC01 > BAC10 > BAC00. When the mass fraction of auxiliary activator H₂SO₄ was 2.0%, the adsorption amount of toluene on the prepared BAC02 activated carbon adsorbent increased by 51%, reaching 511 mg/g. After thermal desorption at 200℃, the adsorption performance of toluene was regenerated. The adsorption process of toluene conforms to the quasi-first-order model and Bangham model. The whole adsorption process can be divided into three stages: outer surface adsorption, intra-channel diffusion, and adsorption equilibrium. The addition amount of H₂SO₄ significantly affected the specific surface area, pore volume, and pore size distribution of the prepared activated carbon adsorbent.

Comparative Study on Pretreatment Processes for Different Utilization Purposes of Switchgrass

Switchgrass (Panicum virgatum, L., Poaceae) with the advantages of high cellulose yield, and high growth even under low input and poor soil quality, has been identified as a promising candidate for production of low-cost biofuels, papermaking, and nanocellulose. In this study, 12 chemical pretreatments on a laboratory scale were compared for different utilization purposes of switchgrass. It was found that the pretreated switchgrass with sodium hydroxide showed considerable potential for providing mixed sugars for fermentation with 11.10% of residual lignin, 53.85% of residual cellulose, and 22.06% of residual hemicellulose. The pretreatment with 2.00% (v/v) nitric acid was the best method to remove 78.37% of hemicellulose and 39.82% of lignin under a low temperature (125 °C, 30 min), which can be used in the production of nanocellulose. Besides, a completely randomized design analysis of switchgrass pretreatments provided the alternative ethanol organosolv delignification of switchgrass for the papermaking industry with a high residual cellulose of 58.56%. Finally, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FT-IR) were carried out to confirm the changes in functional groups, crystallinity, and thermal behavior of the three materials, respectively, from the optimal pretreatments.

A Two-Step Ferric Chloride and Dilute Alkaline Pretreatment for Enhancing Enzymatic Hydrolysis and Fermentable Sugar Recovery from Miscanthus sinensis

A two-step process was proposed to enhance enzymatic hydrolysis of Miscanthus sinensis based on a comparative study of acid/alkaline pretreatments. Ferric chloride pretreatment (FP) effectively removed hemicellulose and recovered soluble sugars, but the enzymatic hydrolysis was not efficient. Dilute alkaline pretreatment (ALP) resulted in much better delignification and stronger morphological changes of the sample, making it more accessible to enzymes. While ALP obtained the highest sugar yield during enzymatic hydrolysis, the soluble sugar recovery from the pretreatment stage was still limited. Furthermore, a two-step ferric chloride and dilute alkaline pretreatment (F-ALP) has been successfully developed by effectively recovering soluble sugars in the first FP step and further removing lignin of the FP sample in the second ALP step to improve its enzymatic hydrolysis. As a result, the two-step process yielded the highest total sugar recovery (418.8 mg/g raw stalk) through the whole process.